Benthic macrofaunal populations through their feeding, bioturbation, burrow construction and sediment irrigation activities have profound influences on organic matter inputs to marine sediments (biodeposition) and on the vertical distribution of deposited organic matter within the sediment. These effects in turn influence the rates and pathways of organic matter mineralisation, and element cycles. Similarly, bioturbation, burrow construction and burrow irrigation are major determinants of sediment-water column fluxes of oxygen and nutrients. In this review, I discuss the influences of the different benthic macrofaunal feeding (functional) groups on mineralisation processes and sediment-water column fluxes of particulate and dissolved nutrients. How these effects influence diagenic processes, the balance between aerobic and anaerobic processes, and the redox status of the surficial sediments. Finally, I discuss some of the limitations of the predominantly laboratory techniques which have been used to study “macrofaunal effects” and how this hinders the inclusion of the effects in quantitative sediment biogeochemical models. 相似文献
Specific anthropogenic substances derived from seepage and leakage water from a waste deposit landfill were analysed in groundwater and drainage effluents using gas chromatography-mass spectrometry (GC/MS). Here, we demonstrate the application of an organic marker approach to study lateral and vertical distribution of contamination as well as the long-term emission behaviour. Source-specific and environmentally-stable pesticides, plasticisers and pharmaceuticals, such as N,N-diethyl toluamide, N-butyl benzene sulfonamide, clofibric acid, mecoprop and bisphenol A, were quantitatively analysed. A distinct lateral expansion was detected. Although temporal variations were high, no significant trend was observed. 相似文献
Treating water contaminants via heterogeneously catalyzed reduction reaction is a subject of growing interest due to its good activity and superior selectivity compared to conventional technology, yielding products that are non-toxic or substantially less toxic. This article reviews the application of catalytic reduction as a progressive approach to treat different types of contaminants in water, which covers hydrodehalogenation for wastewater treatment and hydrogenation of nitrate/nitrite for groundwater remediation. For hydrodehalogenation, an overview of the existing treatment technologies is provided with an assessment of the advantages of catalytic reduction over the conventional methodologies. Catalyst design for feasible catalytic reactions is considered with a critical analysis of the pertinent literature. For hydrogenation, hydrogenation of nitrate/nitrite contaminants in water is mainly focused. Several important nitrate reduction catalysts are discussed relating to their preparation method and catalytic performance. In addition, novel approach of catalytic reduction using in situ synthesized H2 evolved from water splitting reaction is illustrated. Finally, the challenges and perspective for the extensive application of catalytic reduction technology in water treatment are discussed. This review provides key information to our community to apply catalytic reduction approach for water treatment.
The aim of the present work is the assessment of metal toxicity in runoff, in their contaminated soils and in the groundwater
sampled from two mining areas in the region of Marrakech using a microbial bioassay MetPLATE™. This bioassay is based on the
specific inhibition of the β-galactosidase enzyme of a mutant strain of Escherichia coli, by the metallic pollutants. The stream waters from all sampling stations in the two mines were all very toxic and displayed
percent enzyme inhibition exceeding 87% except SWA4 and SWB1 stations in mine C. Their high concentrations of copper (Cu) and zinc (Zn) confirm the acute toxicity shown by MetPLATE.
The pH of stream waters from mine B and C varied between 2.1 and 6.2 and was probably responsible for metal mobilization,
suggesting a problem of acid mine drainage in these mining areas. The bioassay MetPLATE™ was also applied to mine tailings
and to soils contaminated by the acidic waters. The results show that the high toxicity of these soils and tailings was mainly
due to the relatively concentration of soluble Zn and Cu. The use of MetPLATE™ in groundwater toxicity testing shows that,
most of the samples exhibited low metal toxicity (2.7–45.5% inhibition) except GW3 of the mine B (95.3% inhibition during
the wet season and 82.9% inhibition during the dry season). This high toxicity is attributed to the higher than usual concentrations
of Cu (189 μg Cu l−1) and Zn (1505 μg Zn l−1). These results show the potential risk of the contamination of different ecosystems situated to the vicinity of these two
metalliferous sites. The general trend observed was an increase in metal toxicity measured by the MetPLATE with increasing
total and mobile metal concentrations in the studied matrices. Therefore, the MetPLATE bioassay is a reliable and fast bioassay
to estimate the metals toxicity in the aquatic and solids samples. 相似文献
A dense nonaqueous phase liquid (DNAPL) source zone was established within a sheet-pile isolated cell through a controlled release of perchloroethylene (PCE) to evaluate DNAPL remediation by in-situ cosolvent flushing. Ethanol was used as the cosolvent, and the main remedial mechanism was enhanced dissolution based on the phase behavior of the water-ethanol-PCE system. Based on the knowledge of the actual PCE volume introduced into the cell, it was estimated that 83 L of PCE were present at the start of the test. Over a 40-day period, 64% of the PCE was removed by flushing the cell with an alcohol solution of approximately 70% ethanol and 30% water. High removal efficiencies at the end of the test indicated that more PCE could have been removed had it been possible to continue the demonstration. The ethanol solution extracted from the cell was recycled during the test using activated carbon and air stripping treatment. Both of these treatment processes were successful in removing PCE for recycling purposes, with minimal impact on the ethanol content in the treated fluids. Results from pre- and post-flushing partitioning tracer tests overestimated the treatment performance. However, both of these tracer tests missed significant amounts of the PCE present, likely due to inaccessibility of the PCE. The tracer results suggest that some PCE was inaccessible to the ethanol solution which led to the inefficient PCE removal rates observed. The flux-averaged aqueous PCE concentrations measured in the post-flushing tracer test were reduced by a factor of 3 to 4 in the extraction wells that showed the highest PCE removal compared to those concentrations in the pre-flushing tracer test. 相似文献
A novel electrolytic groundwater remediation process, which used the H2 continuously generated at cathode to achieve in situ catalytic hydrodechlorination, was developed for the treatment of 2,4-dichlorophenol (2,4-DCP) in groundwater. Catalytic hydrodechlorination using Pd supported on bamboo charcoal and external H2 showed that 2,4-DCP was completely dechlorinated to phenol within 30 min at pH ? 5.5. In a divided electrolytic system, the catalytic hydrodechlorination of 2,4-DCP in cathodic compartment by H2 generated at the cathode under 20 and 50 mA reached 100% at 120 and 60 min, respectively. Two column experiments with influent pHs of 5.5 (unconditioned) and 2 were conducted to evaluate the feasibility of this process. The 2,4-DCP removal efficiencies were about 63% and nearly 100% at influent pHs of 5.5 and 2, respectively. Phenol was solely produced by 2,4-DCP hydrodechlorination, and was subsequently degraded at the anode. A low pH could enhance the hydrodechlorination, but was not necessarily required. This study provides the preliminary results of a novel effective electrolytic process for the remediation of groundwater contaminated by chlorinated aromatics. 相似文献
The production of N2 gas by denitrification may lead to the appearance of a gas phase below the water table prohibiting the conservative transport of tracer gases required for groundwater dating. We used a two-phase flow and transport model (STOMP) to study the reliability of 3H/3He, CFCs and SF6 as groundwater age tracers under agricultural land where denitrification causes degassing. We were able to reproduce the amount of degassing (R2 = 69%), as well as the 3H (R2 = 79%) and 3He (R2 = 76%) concentrations observed in a 3H/3He data set using simple 2D models. We found that the TDG correction of the 3H/3He age overestimated the control 3He/3He age by 2.1 years, due to the accumulation of 3He in the gas phase. The total uncertainty of degassed 3H/3He ages of 6 years (± 2 σ) is due to the correction of degassed 3He using the TDG method, but also due to the travel time in the unsaturated zone and the diffusion of bomb peak 3He. CFCs appear to be subject to significant degradation in anoxic groundwater and SF6 is highly susceptible to degassing. We conclude that 3H/3He is the most reliable method to date degassed groundwater and that two-phase flow models such as STOMP are useful tools to assist in the interpretation of degassed groundwater age tracer data. 相似文献