Integration of long-term fish kill data with ambient water quality monitoring data and application to water quality management

Almost half (354) of all fish kills (805) in South Carolina, USA, between 1978 and 1988 occurred in the coastal zone. These kills were analyzed for causative, spatial, and temporal associations as a distinct data set and as one integrated with ambient water quality monitoring data. Estuarine kills as a result of natural causes accounted for 42.8% followed by man-induced (35.1%) and undetermined causes (22.1%). Although general pesticide usage was responsible for 53.9% of man-induced kills, weed control activities around resorts and municipal areas accounted for slightly more kills (20.9%) than did agricultural (19.8%) or vector control (13.2%) uses. A dramatic decline in agricultural-related kills has been observed since 1986 as the integrated pest management approach was adopted by many farmers. When taken with the few kills (12.0%) resulting from wastewaters, this suggests that these two land-use activities have been successfully managed via existing programs (IPM and NPDES, respectively) to minimize their contributions to estuarine fish kills. Ambient trend monitoring data demonstrated no coastal-wide dispersion of pesticide pollution. These data confirmed the nature of fish kills to be site-specific, near-field events most closely associated with the contiguous land-use practices and intensities. Typically, fish kill data are considered as event-specific data limited to the bounds of that event only. Our analysis has shown, however, that a long-term data set, when integrated with ambient water quality data, can assist in regulatory and resource management decisions for both short- and long-term planning and protection applications.     

KALMAN FILTER CALCULATION OF SAMPLING FREQUENCY WHEN DETERMINING ANNUAL MEAN SOLUTE CONCENTRATIONS

ABSTRACT: A linear filter (Kalman filter) technique was used with a Streamflow-concentration model the minimize surface water quality sampling frequencies when determining annual mean solute concentrations with a predetermined allowable error. The Kalman filter technique used the stream discharge interval as a replacement for the more commonly used time interval. Using filter computations, the measurement error variance was minimized within the sample size constraints. The Kalman filter application proposed here is applicable only under several conditions including: monitoring is solely to estimate annual mean concentration; discharge measurement errors are negligible; the Streamflow-concentration model is valid; and monthly samples reflect the total variance of the solute in question.     

LEAD AND CADMIUM ASSOCIATED WITH SALTWATER INTRUSION IN A NEW JERSEY AQUIFER SYSTEM1

ABSTRACT: The U.S. Geological Survey collected ground-water samples from the upper and middle aquifers of the Potomac-Raritan-Magothy aquifer system in a 400-square-mile area of New Jersey from 1984 through 1986. Concentrations of lead were greater than the U.S. Environmental Protection Agency maximum contaminant level (MCL) of 50 micrograms per liter in water from 16 of 239 wells. The cencentrations of cadmium were greater than the MCL of 10 micrograms per liter in water from 10 to 241 wells. One-half of the wells that exceeded the lead MCL were in known areas of saltwater intrusion, as were all 10 wells that exceeded the cadmium MCL. The association of elevated concentrations of these metals with elevated concentrations of chloride indicates a mochanism related to saltwater intrusion.     

MODEL FOR PREDICTING TRANSPORT OF PESTICIDES AND THEIR METABOLITES IN THE UNSATURATED ZONE1

ABSTRACT: A finite element model based on Galerkin's upstream weighted residual technique was developed to predict the simultaneous convective-dispersion transport and transformations of pesticides and their metabolites in the unsaturated zone. Transformations of the parent compound and its metabolites were assumed to be first-order reactions for oxidation and hydrolysis, while adsorption of the pesticide species (parent compound and metabolites) to the soil components was assumed to be represented by a linear equilibrium (Freundlich type) isotherm. Volatilization and plant root uptake of pesticides in the solution phase were neglected in the analysis. The proposed model was used to simulate the transport and transformation of aldicarb and its metabolites, aldicarb sulfoxide and aldicarb sulfone, in the soil profile. Several examples are used to demonstrate the accuracy, validity, and applicability of the proposed model. Simulated results indicate that the proposed model can potentially be used to estimate the mass flux of water, and pesticide and pesticide metabolite concentrations in the subsurface environment. However, further verification of the model against actual field data is needed to fully demonstrate the model's potential.     

ESTIMATING THE WATER QUALITY BENEFITS FROM SOIL EROSION CONTROL1

ABSTRACT: A framework for estimating the water quality benefits from soil erosion was developed. The framework is based on the linkages between soil erosion and offsite damages. The linkages are: erosion on the field, movement of eroded materials to waterways, impact of discharged material on water quality parameters, impact of water quality changes on ability of water to provide economic services, and the economic value of the changes in water use. These linkages need to be modeled in order to estimate the water quality benefits from reductions in soil erosion. Methods for modeling each link on a geographic level, which enables the analyses of national soil conservation, were examined. Areas where data or models were found to be lacking include transport of sediment and nutrients to water systems, impact of discharged materials on water quality parameters, and impact of water quality on ability of water to provide economic services. An economic evaluation of 1983 soil conservation programs was presented as an example of how the framework could be used. A number of simplifying assumptions were made to represent links that could not be modeled with available data.     

Fecal coliform loadings and stocks in buttermilk bay,Massachusetts, USA,and management implications

Abundance of fecal caliform bacteria is a weak index of the presence of human pathogens in wastewater entering coastal waters. In spite of this, use of fecal caliform indices for management purposes is widespread. To gain insight into interpretation of fecal coliform data, we evaluated size of stocks of fecal coliforms in water, sediments, and sea wrack, in Buttermilk Bay, a coastal embayment in Massachusetts. Sediments contained most of the fecal coliforms. Fecal coliforms in sediments were as much as one order of magnitude more abundant than in the water column or in sea wrack. The fecal coliforms in sediments of Buttermilk Bay were so abundant that resuspension of fecal coliforms from just the top 2 cm of muddy sediments could add sufficient cells to the water column to have the whole bay exceed the federal limit of fecal coliforms for shellfishing. The major sources of fecal coliforms to the bay were water-fowls, surface runoff, groundwater, and streams. Waterfowl were the largest source of fecal coliforms during cold months; surface runoff, streams, and groundwater were most important during warm months. Redirection of surface runoff pipes is unlikely to be a very successful management action since contributions via this source are insufficient to account for the measured increases in concentrations of fecal coliforms in water. Removal of waterfowl is also unlikely to be useful, since fecal coliform concentrations leading to closures of shellfish beds and swimming areas are most frequent during warm months when waterfowl are rarest. Rates of loss of fecal caliform cells from the water column by death and tidal exchange were high. Mortality of cells was about an order of magnitude larger than losses by tidal exchange. The amounts of fecal coliforms brought into the bay by waterfowl, surface runoff, groundwater, and streams are an order of magnitude smaller than the losses by mortality and tidal removal. This implies that there is an additional source of fecal coliforms within the bay. We suggest that resuspension of the upper layers of sediments can easily account for the fecal coliforms present in the water. Fecal coliform content of water and shellfish were not correlated. In contrast, sediment and shellfish fecal coliform abundances were significantly related. Monitoring of fecal coliforms in sediments may provide a better assessment of shellfish than sampling of water. The large fecal coliform stock in sediments should be the first priority for management. Efforts ought to be directed toward the reduction of sediment fecal coliform stocks. Lowering nutrient additions to coastal water bodies may be one practical approach.     

IDENTIFICATION OF DISSOLVED-CONSTITUENT SOURCES IN MINE-SITE GROUND WATER USING BATCH MIXING1

ABSTRACT: Batch-mixing experiments were used to help identify lithologic and mineralogic sources of increased concentrations of dissolved solids in water affected by surface coal mining in northwestern Colorado. Ten overburden core samples were analyzed for mineral composition and mixed with distilled water for 90 days until mineral-water equilibrium was reached. Between one day and 90 days after initial contact, specific conductance in the sample mixtures had a median increase of 306 percent. Dissolved-solids concentrations ranged from 200 to 8,700 mg/L in water samples extracted from the mixtures after 90 days. Mass. balance simulations were conducted using the geochemical models BALANCE and WATEQF to quantify mineral-water interactions occurring in five selected sample mixtures and in water collected from a spring at a reclaimed mine site. The spring water is affected by mineral-water interactions occurring in all of the lithologic units comprising the overburden. Results of the simulations indicate that oxidation of pyrite, dissolution of dolomite, gypsum, and epsomite, and cation-exchange reactions are the primary mineral-water interactions occurring in the overburden. Three lithologic units in the overburden (a coal, a sandstone, and a shale) probably contribute most of the dissolved solids to the spring water. Water sample extracts from mixtures using core from these three units accounted for 85 percent of the total dissolved solids in the 10 sample extracts. Other lithologic units in the overburden probably contribute smaller quantities of dissolved solids to the spring water.     

POLLUTANT LOADS IN URBAN STORMWATER: REVIEW OF METHODS FOR PLANNING-LEVEL ESTIMATES1

ABSTRACT: A review of methods for planning-level estimates of pollutant loads in urban stormwater focuses on transfer of charac. teristic runoff quality data to unmonitored sites, runoff monitoring, and simulation models. Load estimation by transfer of runoff quality data is the least expensive, but the accuracy of estimates is unknown. Runoff monitoring methods provide best estimates of existing loads, but cannot be used to predict load changes resulting from runoff controls, or other changes of the urban system. Simulation models require extensive calibration for reliable application. Models with optional formulations of pollutant build up, washoff, and transport can be better calibrated and the selection of options should be based on a statistical analysis of calibration data. Calibrated simulation models can be used for evaluation of control alternatives.