80m烟囟排放放射性气溶胶连续自动监测

本文介绍采用德国进口的ＬＢ９１００Ｄ监测系统对８０ｍ烟囟排放的α放射性气溶胶浓度进行连续、自动监测。并与国产ＦＪ－３６７，ＦＨ－４６３Ａ装置进行了对比则量，两套装置的测量结果符合得较好。     

液固比对含重金属水泥熟料制品中重金属释放的影响

通过模拟煅烧试验制取水泥熟料,参照JGJ 55-2000（《普通混凝土配比设计规程》）制取混凝土样品,参考SR003.1和NEN 7375浸出试验,分别研究液固比对粒状及块状混凝土样品中重金属（Cr、Ni和As）释放的影响。结果表明,在不同液固比条件下粒状混凝土中的重金属浸出浓度为Cr>Ni>As,Cr、As浸出浓度基本保持不变,分别为2 500 μg/L左右和5～6 μg/L,Ni在液固比（L∶S）<6时,浸出浓度随着液固比的增加而降低,在L∶S>6时,浸出浓度较稳定,为35.7～41.5 μg/L;浸出量均随着液固比的增加而增大。液固比（L∶S）<10时,块状混凝土中重金属累积释放量及扩散系数均随液固比的增加而增大,当L∶S>10时两者基本保持不变。     

Trends in airborne particulates in Stuttgart, Germany: 1972-2005

Since 1972, at the University of Hohenheim in Stuttgart, Germany, airborne particulate matter (PM12 and then PM10) was continuously collected on filters and analyzed for environmentally relevant elements by X-ray fluorescence analysis. The resulting long-term time series are suitable for the investigation of trends and of seasonal variation. For the period 1972-2005, monthly and annual concentration mean values of 13 elements (Br, Ca, Cr, Cu, Fe, K, Mn, Ni, Pb, S, Ti, V, and Zn) in the air are presented. Trend curves were fitted and the mean yearly variation of the concentration for these elements was calculated and represented graphically. All trend curves show a diminution of the air pollution during this period, but to different extents. Mean trends in percent per year were calculated for each element both for the entire investigation period and for three data subsets of 10-11 years. Possible explanations are discussed in detail.     

AAO工艺低氧条件下的运行及其模拟

利用厌氧-缺氧-好氧(AAO)工艺探讨了在好氧池低溶解氧(DO)浓度条件下的水质指标变化情况.结果表明,当好氧池DO浓度从2.00 mg·L~(-1)降低到1.00 mg·L~(-1)和0.50 mg·L~(-1)时,系统仍然具有良好的除磷脱氮效果,出水水质指标均满足我国《城镇污水处理厂污染物排放标准》(GB 18918-2002)中的一级A标准.在此基础上,基于Bio Win 4.1软件建立了AAO工艺的活性污泥模型,对模型参数进行了灵敏度分析,并利用动态模拟对模型参数中的聚磷菌吸收乙酸或丙酸的聚羟基烷酸(PHA)产率系数(YP/PHA,seq)、聚磷菌好氧氧化PHA的储磷率(YP/PHA,aerobic)、氨氧化菌的最大单位生长速率(μmax,A)和亚硝酸盐氧化菌的最大单位生长速率(μmax,N)进行了校验.此外,对系统的曝气能耗进行了模拟评估,结果表明,与好氧池DO浓度为2.00 mg·L~(-1)时相比,好氧池DO浓度为1.00 mg·L~(-1)和0.50 mg·L~(-1)时的空气流量可分别节省23.8%和38.1%,氧转移效率可分别提高7.2%和11.7%.     

水生生物对三唑磷的物种敏感度分布研究

针对水环境中日益严重的有机磷农药污染问题,选择广泛使用的三唑磷作为研究对象,利用其对水生生态系统中不同营养层次生物物种的半数效应浓度(median effective concentration, EC₅₀),建立了基于对数-逻辑斯蒂分布的水生生物物种敏感度分布(species sensitivity distribution, SSD)模型,并采用概率图和吻合度检验方法对该模型进行了检验和评价.结果表明,水生生物对三唑磷的 SSD 服从对数-逻辑斯蒂分布,其参数为 α=-0.4788±0.2381,β=0.7546±0.1078.基于该 SSD 模型,获得三唑磷的 5% 危害浓度(hazardous concentration for 5% of the species, HC₅)值为 1.992×10^-3 mg/L,并推导出三唑磷的最大浓度基准值(criteria maximum concentration, CMC)值为 9.96×10^-4 mg/L.对 HC₅、CMC 与单一物种的安全浓度的比较研究指出,基于 SSD 方法制定环境质量标准更为严格,也更接近于真实的生态环境.另外,根据渤海莱州湾海域中三唑磷的监测数据,预测了其对物种的潜在影响比例(potentially affected fraction, PAF)为 0.36%,对该水域生态环境的影响处于较低风险水平.     

pH值和离子对诺氟沙星在胡敏酸上吸附特征的影响

根据OECD Guideline 106批平衡实验,研究了pH值、Ca2+浓度和离子类型对诺氟沙星在胡敏酸上吸附特征的影响.结果表明,吸附系数(Kd)随着pH值的增大有先增加后减小的趋势,在pH 4.0和pH 6.0时吸附系数较大.红外光谱表明,pH 3.0有利于诺氟沙星和胡敏酸形成氢键; pH6.0和7.0时胡敏酸的羧基可能与诺氟沙星的氨基形成了肽键.诺氟沙星在胡敏酸上的吸附量和Kd值随着溶液中Ca2+离子浓度的增加而逐渐减小,表明两者之间存在阳离子吸附和竞争吸附.不同类型的阳离子和阴离子的加入都能导致诺氟沙星在胡敏酸的吸附特性存在差异.阳离子的影响趋势主要为价态的影响,即价态越高,在胡敏酸表面吸附位点的吸附能力就越强,对诺氟沙星吸附阻碍作用越显著,表现在诺氟沙星的最大吸附量(Qm)为:M+ (Na+、K+、NH4+) >M2+ (Mg2+、Ca2+、Zn2+);其次受阳离子的离子半径和水解作用的影响.而只有能水解的阴离子才能对诺氟沙星在胡敏酸上的吸附产生明显的阻碍作用.     

长三角典型村域次降雨条件下氮素非点源输出特征

研究长三角典型都市农业村镇不同土地利用下的氮素非点源输出特征,以期为治理该区域的面源污染提供科学依据.通过典型次降雨径流事件中氮形态和输出负荷变化的研究发现:监测点总氮(TN)的事件平均浓度(EMC)为20.01～22.83mg/L,其中溶解态氮(DN)占TN的比例最大;研究区非点源氮流失以溶解态为主,DN又以溶解态有机氮(DON)为主.耦合各形态氮浓度与径流量特征,发现非点源氮素输出呈现2个峰值,且出现在径流峰值之前4～55min;TN、DN和硝态氮(NO3--N)浓度随降雨时间增加呈现减少趋势;氮素负荷受其浓度和径流量的共同作用,基本上呈现与氮素浓度相同的变化特征,但起伏变化较为平缓.氮素污染负荷积累曲线分析表明,村域地表径流各形态氮素均存在初期冲刷效应.     

天津城市污水泵站恶臭气体组分浓度及污染现状

为了解天津城市污水泵站恶臭的污染程度,选取天津市一个典型的城市污水泵站进行为期3天的采样,采集该污水泵站距离污染源强不同距离处的恶臭气体样品,用气相色谱-质谱联用仪（GS-MS）和分光光度法对采集样品的组分含量进行检测,比较了恶臭排放源点和不同距离处的恶臭组分的浓度特征和污染现状。结果表明,该泵站恶臭污染物质以硫化氢、二氯甲烷和苯系物为主,还有一些烯烃和芳香烃衍生物;恶臭物质的浓度变化范围是n.d.~0.073 7 mg/m³,大部分恶臭物质浓度一般由高至低表现为源点>下风向5 m,源点>背景值,环境空气采样点与恶臭排放源相比,其降幅明显;虽然检测到的恶臭组分较多,但是其浓度与《恶臭污染物排放标准》（GB 14554—1993）等标准中规定的排放限值相比,均未超标。     

A transportation network assessment tool for hazardous material cargo routing: Weighing exposure health risks,proximity to vulnerable areas,delay costs and trucking expenses

The inherent risks associated with accidental releases of hazardous materials during transport have drawn attention and concerns in the recent decades. The aim of this study is to propose a tool for evaluation and comparison of the transportation networks which can be used to assess the routing options between origins and destinations of the cargos for their suitability for transporting hazardous material cargos by tanker trucks and to identify routes which provide lower accidental release risks, lower public exposure risks, and offer economical benefits. Each route segment of transportation networks were evaluated using specific criteria which included health risk and cost of delay in case of an accidental release of materials, trucking cost and proximity to vulnerable areas. Since, the health impact of hazardous materials differ depending on the characteristics of the material being transported as well as release quantities and atmospheric conditions; this paper aimed in providing a tool that can be used to estimate the impact radius (for health risks) after accidental release of hazardous materials by taking into account different atmospheric conditions based on the meteorological data and solar elevation angle. The Gaussian air dispersion model paired with ArcGIS using Python programming were employed to estimate the health risk impact zones by considering the meteorological data, and accordingly to analyze road segments for cost impacts (delay and trucking costs), and the proximity to vulnerable areas. The route assessment tool was demonstrated with a case study. The results of this study can efficiently aid decision makers for transportation of hazardous materials.     

关于臭气浓度无组织排放监测的探讨

对臭气浓度无组织排放监测过程中的准备阶段、样品采集、样品分析、结果应用等方面进行了探讨,使现场监测工作更具规范性和有效性。