Olive oil mill wastewater for soil nitrogen and carbon conservation

In this work the application of two levels of N fertilizer (NH₄NO₃) dissolved in water or olive oil mill wastewater (OOMW) diluted 10 or 20 times in water, has been studied in relation to the properties of two soils (Loam and Silt-Clay-Loam). Also, the effect of irrigation water bubbled with CO₂ (Dissolved Inorganic Carbon, DIC) was studied. Nitrate N, ammonium N, total N, organic C (OC), and CaCO₃ contents were determined in the soil as well as pH, electrical conductivity (EC), oxidation–reduction potential (ORP), and absorbance at 250 and 360 nm.     

Material flow analysis of lubricating oil use in California

Petroleum lubricating oils, used throughout the economy, are distinct among petroleum products in their capacity to be recovered and recycled at the end of their useful life. Used lubricating oil is regulated at the state and federal level because of concerns about environmental impacts arising from improper disposal, although rates of recovery are not known. We present a material flow analysis of lubricants through California's economy in the years 2007–2012. We introduce a novel technique for computing aggregate waste generation from a collection of hazardous waste manifest records, and apply it in order to determine a recovery rate for used oil and to estimate the quantity of oil managed informally in the state. The records also offer a detailed view of the fate of used oils after they are recovered. We find that around 62% of lubricants are recoverable at end of life, of which 70–80% is being recovered. This rate shows a slight downward trend. If the trend is accurate, measures should be taken to improve the performance of the used oil management system. Policy opportunities exist to reduce the quantity of oil managed informally through improving access to responsible used oil management methods. These include increasing the collection of used oil from industrial sources as well as “do it yourself” oil changes, expanding in-state reprocessing capacity, and promoting increased out-of-state reprocessing of used oil. Our methods introduce new possibilities to make use of direct observation in material flow analysis, potentially improving data availability and quality and increasing the relevance of material flow methods in policy applications.     

我国工业固体废物处理利用行业2013年发展综述

综述了我国工业固体废物处理利用行业2013年的发展环境形势和发展概况;介绍了2013年国内工业固体、危险废物及生活垃圾的产生量和处理情况;阐述并分析了目前国内固体废物处理技术和设施的现状;就行业发展存在的主要问题提出了建议.     

重庆含铜废物利用行业技术准入研究

因缺失含铜废物利用技术准入规范,从业企业良莠不齐,制约了该行业的良性发展.通过分析重庆市含铜废物利用现状、存在问题,从含铜废物利用项目选址用地、建设规模、产品质量、技术工艺、设施建设、准入许可及环境管理等方面提出准入门槛规定,以期为含铜废物利用行业良性发展提供参考.     

Hazardous wastes transboundary movement management: a case study in Taiwan

More than 50,000 tons of hazardous waste are imported and exported worldwide each year. Over 50% of hazardous waste is exported to Southeast Asia, of which leather waste is the major component. The exportation quantities of hazardous waste to Organization of Economic Cooperation and Development (OECD) countries are decreasing while they are on the increase to non-OECD countries. Some of these wastes are intended for recycling purposes but the usage of some others is not stipulated. The hazardous waste importation quantity kept fairly steady from 1997 to 2000, of which ash or residues containing copper or copper compounds were the major component. Under existing regulations and measures, the transboundary movement of hazardous waste cannot be effectively controlled and monitored. In order to ensure environmentally sound hazardous waste management, EPA-Taiwan revised the Waste Disposal Act in 2001 and cooperated with the Industrial Development Bureau (IDB) to promote industrial waste reduction and recycling projects. Strategies were proposed based on evaluation according to the 3Es Principles and the site investigation in this study.     

Formulation of criteria for pollution control on cement products produced from solid wastes in China

The process of producing cement products from solid waste can increase the level of pollutants in the cement products. Therefore, it is very important to establish a pollution control standard for cement products to protect the environment and human health. This paper presents acceptance limits for the availability of heavy metals in cement products which have been produced from solid wastes and explains how the limits have been calculated. The approach and method used to formulate these criteria were based on EN 12920. The typical exposure scenarios used in this paper involve concrete being used for drinking water supply pipelines and concrete pavements and are based on an analysis of typical applications of cement in China, and the potential for contact with water. The parameters of a tank test which was based on NEN 7375 were set in accordance with the environmental conditions of typical scenarios in China. Mechanisms controlling the release of heavy metals in concrete and a model for that release were obtained using the leaching test. Finally, based on acceptance criteria for drinking water and groundwater quality in China, limit values for the availability of heavy metals in concrete were calculated.     

Zinc recovery from hazardous construction wastes via an integrated process of the air classification,alkaline leaching,and water washing

Zinc- and lead-containing wastes are often mixed with construction and demolition wastes in many factories, generating abundant of heavy metal-enriched hazardous waste. In the present study, a novel integrated process of air classification, alkaline leaching, and water washing dechlorination was proposed for the efficient recycling of Zinc (Zn) resources. The first air classification process was realized via venturi tube, wherein the content of Zn could increase by 20 wt.%. After that, the product underwent an alkaline leaching process. Results showed that Zn recovery rate increased with fine particle sizes, and a 65% recovery rate was obtained under the following conditions of 5 mol/L NaOH, liquid/solid 10:1, and leaching time 1 h. Finally, water washing associated with microwave and ultrasonic treatments could remove over 85% of Cl and other water-soluble salts. All the results indicated that the integrated method had an excellent recovery rate for Zn resources from construction and demolition wastes.     

垃圾焚烧飞灰中重金属的固化/稳定化处理实验研究

研究了城市生活垃圾焚烧-电灰的特性及飞灰中重金属的特性,对利用水泥作粘结剂进行飞灰固化/稳定化处理效果开展了系统的实验研究,分析了水泥固化/稳定化飞灰的工艺特点和最佳工艺参数,并讨论了粘结剂固化飞灰机理以及重金属浸出毒性,为进一步研究城市生活垃圾焚烧飞灰的无害化处理与利用提供了有重要价值的参考依据.     

金属离子强化餐厨垃圾高温厌氧发酵产酸

以经过高温驯化的污泥作为厌氧微生物,以餐厨垃圾作为发酵基质,向发酵体系中加入不同浓度Fe2+、Mg2+和Ni2+进行单因素实验。实验结果表明:当Fe2+、Mg2+和Ni2+加入量分别为800、250和0.50 mg/L时,挥发性脂肪酸(VFA)的产量最大,分别为23.58、22.38和23.08 g/L;加入不同浓度Fe2+、Mg2+和Ni2+的厌氧发酵液相产物中丁酸含量均最高,但在一定浓度范围内随着金属离子的添加,发酵产物中丁酸所占的比例逐渐减小,乙酸所占比例逐渐增加;加入适量金属离子在一定程度上能够抑制发酵液中氨氮的溶出。     

Pyrolysis of waste animal fats in a fixed-bed reactor: Production and characterization of bio-oil and bio-char

Several animal (lamb, poultry and swine) fatty wastes were pyrolyzed under nitrogen, in a laboratory scale fixed-bed reactor and the main products (liquid bio-oil, solid bio-char and syngas) were obtained. The purpose of this study is to produce and characterize bio-oil and bio-char obtained from pyrolysis of animal fatty wastes. The maximum production of bio-oil was achieved at a pyrolysis temperature of 500 °C and a heating rate of 5 °C/min. The chemical (GC–MS analyses) and spectroscopic analyses (FTIR analyses) of bio-oil showed that it is a complex mixture consisting of different classes of organic compounds, i.e., hydrocarbons (alkanes, alkenes, cyclic compounds…etc.), carboxylic acids, aldehydes, ketones, esters,…etc. According to fuel properties, produced bio-oils showed good properties, suitable for its use as an engine fuel or as a potential source for synthetic fuels and chemical feedstock. Obtained bio-chars had low carbon content and high ash content which make them unattractive for as renewable source energy.