N、P、Fe、Mn对亚历山大藻LC3生长的影响

利用正交试验研究了N、P、Fe、Mn四种物质对亚历山大藻LC3生长的影响,比较无机营养盐及微量金属元素对亚历山大藻LC3增殖影响的大小顺序,结果显示无机N对藻的生长有促进作用,882—2646μmol／L浓度时LC3生长较好,2646μmol／L下生长速率略快。无机P对亚历山大藻LC3生长的影响差异显著,一定浓度的P对LC3的生长有促进作用。Fe及Mn对藻生长均有促进作用,分别在3．5μg／L的Fe浓度下及18—36gg／L的Mn浓度下藻可获得较快的生长速率。四种元素对亚历山大藻LC3生长均有促进作用,各元素对生长影响的大小顺序依次为：P〉Mn〉N〉Fe。     

不同类型活性炭处理废水中重金属离子的研究进展

重金属对人体的显著毒性和难降解的特性,使重金属水体污染成为全球性关注的环境问题。本文综述了重金属废水的危害、来源及常用处理方法,比较了不同类型活性炭处理废水中重金属离子的差异,阐述了不同类型活性炭处理技术的优势和特点,并对今后的重金属废水处理技术研究方向进行了展望。     

环境监测中重金属污染的控制对策分析

在我国社会经济快速发展的过程中,人们对自然资源需求无度,造成生态环境破坏问题非常严重。通过环境监测可以及时分析空气中有毒有害的物质成分,并且对环境污染问题进行及时有效的解决。但是在监测的过程中所采用大量的空气试剂很容易造成环境二次污染等问题,为此必须要积极加强对环境监测中重金属污染的合理控制,对空气试剂产生的大量废弃物进行及时的回收处理,从而有效避免出现二次污染的情况,充分发挥环境监测的作用。     

农田重金属污染修复新技术展望与探索

目前,土壤重金属污染已成为全球各国共同面临的棘手问题。土壤重金属污染具有隐蔽性、滞后性、积累性、持久性等特点,已严重危害到人类的健康。本文在全面了解国内外重金属污染土壤修复研究动态的基础上,对纳米多孔磁性螯合材料用于农田重金属污染土壤修复的新技术进行展望与探索研究,为国内这一领域的工作开展提供借鉴参考。     

Magnetotactic bacteria: Characteristics and environmental applications

• Magnetotactic bacteria (MTB) synthesize magnetic nanoparticle within magnetosomes. • The morphologic and phylogenetic diversity of MTB were summarized. • Isolation and mass cultivation of MTB deserve extensive research for applications. • MTB can remove heavy metals, radionuclides, and organic pollutants from wastewater. Magnetotactic bacteria (MTB) are a group of Gram-negative prokaryotes that respond to the geomagnetic field. This unique property is attributed to the intracellular magnetosomes, which contains membrane-bound nanocrystals of magnetic iron minerals. This review summarizes the most recent advances in MTB, magnetosomes, and their potential applications especially the environmental pollutant control or remediation. The morphologic and phylogenetic diversity of MTB were first introduced, followed by a critical review of isolation and cultivation methods. Past research has devoted to optimize the factors, such as oxygen, carbon source, nitrogen source, nutrient broth, iron source, and mineral elements for the growth of MTB. Besides the applications of MTB in modern biological and medical fields, little attention was made on the environmental applications of MTB for wastewater treatment, which has been summarized in this review. For example, applications of MTB as adsorbents have resulted in a novel magnetic separation technology for removal of heavy metals or organic pollutants in wastewater. In addition, we summarized the current advance on pathogen removal and detection of endocrine disruptor which can inspire new insights toward sustainable engineering and practices. Finally, the new perspectives and possible directions for future studies are recommended, such as isolation of MTB, genetic modification of MTB for mass production and new environmental applications. The ultimate objective of this review is to promote the applications of MTB and magnetosomes in the environmental fields.     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

土壤中7种重金属和砷测定的精密度控制指标研究

通过对浙江省近700组实际土壤样品进行分析,研究了土壤中铜、铅、锌、铬、镍、镉、砷、汞7种重金属和砷测定的精密度控制指标(实验室内相对偏差和实验室间相对偏差),并与行业标准分析方法和文献进行了比较,旨在为环境监测质量控制与质量保证工作提供参考。经统计分析,建议实验室内相对偏差控制指标如下:铜,≤15%;铅,≤15%;锌,≤15%;铬,≤15%;镍,≤15%;镉,≤20%;砷,≤15%;汞,≤50%。建议实验室间相对偏差控制指标如下:铜,≤25%;铅,≤25%;锌,≤20%;铬,≤20%;镍,≤25%;镉,≤35%;砷,≤25%;汞,≤55%。     

Spatial Characterization and Prioritization of Heavy Metal Contaminated Soil-Water Resources in Peri-Urban Areas of National Capital Territory (NCT), Delhi

Due to rapid industrialization and urbanization during last two decades, contamination of soils by heavy metals is on an increase globally. Lands under peri-urban agriculture are the worst affected. In NCT, Delhi about 14.4% of land area is chemically degraded. In order to take care of this problem, recently the Supreme Court of India ordered to shift various non-confirming (about 39,000 units) industries to regions outside NCT, Delhi. However in spite of this, there have been several reports and parliamentary debates on the phyto-toxicity and extensive accumulation of heavy metals in the region. Literature review revealed that the basis of these debates is a few studies on some point locations in/around Delhi. It was further observed that information on the distribution and extent of heavy metal pollution problem in the region was completely missing. The present study was thus basically aimed at assessing the spatial distribution/extent and type of heavy metal pollution in the study area, for enabling future designing of appropriate site-specific management measures by the decision makers.For this, detailed spatial information on bio-available heavy metal concentrations in the soils and surface/sub-surface waters of NCT (Delhi) was generated through actual soil/water surveys, standard laboratory methods and GIS techniques. The study showed that concentration of all micronutrients (viz. Zn: 0.05–0.18 ppm; Cu: in traces; Fe: 0–0.5 ppm; and Mn: 0–1.2 ppm) and most heavy metals (viz. Ni: 0–0.7 ppm; Pb: 0–0.15 ppm and Cd: in traces) in the surface/sub-surface irrigation waters were well within permissible limits. However Cr concentrations in irrigation waters of Alipur and Shahdara blocks were far above their maximum permissible limit of 1 ppm. It was further observed that Ni and Cr concentrations in the drinking waters of almost entire test area were far above maximum permissible levels of 0.02 and 0.01 ppm, respectively. Bio-available concentrations of several heavy metals (viz. Pb: 0.1–2 ppm; Cd: traces; Ni: 0.05–2 ppm and Cr: 0–0.4 ppm) in the study area soils were also observed to be well within the maximum permissible limits. However there were point Cu contaminations (5–10 ppm) in the sewage-sludge amended soils of vegetable growing areas near south Shahdara block. This was attributed to increased Cu availability due to oxidized acidic conditions generated by over-irrigation of agricultural lands. Available Mn concentrations in Kanjhawala, western Najafgarh and Alipur soils were also observed to be above maximum permissible limit of 10 ppm. This was observed to be mainly due to the geology (i.e. presence of Mn rich sedimentary rocks) and prevalence of reduced acidic conditions, due to paddy cultivation, in these areas. It was further observed that there is acute zinc (Zn) deficiency (< 0.6 ppm) in paddy growing soils of north Kanjhawala, Alipur and some parts of Najafgarh and Shahdara blocks due to extensive leaching of available Zn fractions to lower soil horizons. Similar available Zn deficiencies in high pH (8.5) soils of areas around Bamnoli village in E-Najafgarh block were also observed.     

大型铜尾矿库区节节草(Hippochaete ramosissimum)根际土壤重金属形态分布与影响因素研究

通过野外调查和实验分析,对安徽省铜陵市铜官山铜尾矿库、狮子山铜尾矿库及狮子山铜尾矿库周边农田3处生长的节节草根际与非根际土壤中重金属(Cu、Cd、Pb、Zn)的形态、含量和分布进行了研究.结果表明,节节草根际与非根际土壤重金属的主要形态分布基本一致,均表现为矿物态含量占据了重金属全量的大部分,而交换态含量偏低.与非根际土壤相比较,根际土壤中交换态、有机态重金属所占比例显著增加,其中Cu的有机结合态所占比例增加了53 25%、Cd、Pb的有机结合态所占比例增加超过17%,Zn则增加了5.67%;与此同时,碳酸盐结合态和铁锰氧化物结合态含量有所下降.统计分析表明,Cu、Cd、Pb、Zn在根际土壤中的形态分布与土壤pH值、有机质含量、植物生长等因素密切相关.     

污泥中重金属的去除及回收试验

论述了利用离子交换技术循环使用柠檬酸去除污泥中重金属,并置换回收重金属的适宜工艺条件.经柠檬酸处理后,污泥中90%以上的重金属被去除;柠檬酸处理液中的重金属用离子交换法回收,考察了树脂种类、流速、操作方式等因素对离子交换、再生效果的影响;在适宜工艺条件下,重金属的交换率均为100%,而洗脱率均接近90%;柠檬酸及离子交换树脂循环使用,重金属也得到回收,降低了处理成本.