Mass balance approach to estimating radionuclide loads and concentrations in edible fish tissues using stable analogues

Humans can consume a number of types of biota tissues, which have varying propensities to accumulate radionuclides. As a result, depending upon the biota species, the radionuclide and the tissue under consideration, it may be necessary to estimate the percent radionuclide load in specific edible tissues, and in cases where whole organisms are consumed, to estimate the radionuclide load in the whole body of an organism, based on data that have been collected for individual tissues. To accomplish this, data were compiled that can be used to estimate the partitioning patterns and percent loads of various groups of elements in edible tissues of freshwater fishes. General trends in partitioning, such as those provided in this paper, can be used to predict radionuclide transfer to humans and the corresponding potential radiological dose to humans via dietary pathways, in this case following the consumption of fish.     

Polychlorinated dibenzo-p-dioxins, dibenzofurans and polychlorinated biphenyls levels in human breast milk from different regions of Turkey

Human breast milk offers the optimal nutrition for all infants and have been widely used in biomonitoring programs to assess human exposure to lipophylic environmental contaminants such as polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and polychlorinated biphenyls (PCB). There are no previous reports from Turkey on chemically determined levels of PCDDs, PCDFs, and PCBs in human breast milk expressed as World Health Organization (WHO) toxic equivalents (TEQ). To get an overview of the levels of these contaminants in Turkish human milk, samples from 51 Turkish women living in the Ankara, İstanbul, Antalya, Kahramanmaraş, and Afyon provinces were analyzed by high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) throughout 2007. The mean concentrations of WHO_PCDD/F-TEQ and WHO_PCB-TEQ of all samples from the five regions were 7.5 and 3.1 pg g⁻¹ on a lipid basis, respectively. PCDD/F concentrations ranged between 0.78 and 29.3 pg WHO-TEQ g⁻¹ fat (1.7 and 36.2 pg WHO-TEQ g⁻¹ fat, respectively, including PCB). Of the five studied locations, the lowest levels of ∑TEQs (PCDD/F + PCB) were found in the Afyon (6.8 pg WHO-TEQ g⁻¹ fat) and the highest in the Antalya (15.6 pg WHO-TEQ g⁻¹ fat) province. The results have been discussed in terms of regions and PCDD/F and PCBs for which analyses had been made. The mean levels of PCDD/Fs and PCBs in Turkish human milk are comparable to that found in other countries.     

Substance-related environmental monitoring

Background  Due to the requirements of the EU Water Framework Directive and other legal regulations (e.g., national laws like the German Federal Soil Protection Act), but also due to the implementation of the new EU chemicals management system REACH, environmental monitoring will gain increasing importance for the surveillance of environmental quality as well as for the assessment of chemicals. Against this background, the Work Group on ‘Environmental Monitoring’ of the Division of ‘Environmental Chemistry and Ecotoxicology’ within the German Chemical Society has compiled a position paper on substance-related environmental monitoring. Scope  Core elements of this position paper are the definitions of important terms like monitoring, exposure monitoring, effect monitoring, and integrated monitoring. Moreover, temporal and spatial aspects (monitoring of spatial distributions, trend monitoring, and retrospective monitoring) and their applications are discussed. The main focus of this position paper is the coverage of aspects which have to be observed for the preparation and implementation of a monitoring program. Essential is the clear specification of the targets of the monitoring which determine the development of the monitoring concept and its realization, e.g., if environmental media (compartments) or organisms are most appropriate as samples for the aim of the study. Of course, also the properties of the target substances are important (e.g., lipophilicity/bioaccumulation as pre-requisite for an exposure monitoring with organisms). Finally, the monitoring phases of sample planning, sampling, storage and transport of samples, selection of analytical methods, quality assurance measures as well as reporting are discussed. Perspectives  An important issue for the future is to link the quantification of chemicals in environmental compartments (exposure and pollution monitoring) more closely to the study of biological effects (effect monitoring) than has been the case up to now. Furthermore, by inclusion of a spatial differentiation, a comprehensive evaluation of the state of an ecosystem can be obtained and the relevance of the results improved. Practical examples of monitoring studies which illustrate various aspects covered in this position paper will be presented in a series of publications by members of the Work Group in the following issues of this journal.

Risk assessment tools incorporating human error probabilities in the Japanese small-sized establishment

Although it has been estimated that as many as 80% of all occupational accidents have human errors as a cause, no risk assessment tools incorporating human-related elements have been developed for small companies. Human error probability (HEP) and human error analysis (HEA) have been used for large-scale, safety-critical industries for last three decades, but these tools are not suitable for smaller, more general industries that comprise the majority of accident settings.Here, we describe and verify a risk assessment tool that includes human-related elements for small companies. The tool expands on traditional risk assessment methods, such as matrix, risk graph and numerical scoring method, by adding human-related elements. The tool is easy-to-use in occupational environments, and includes assessments of human behavior and potentially outdated machinery at work place.     

Eco-design practices towards sustainable supply chain management: interpretive structural modelling (ISM) approach

Due to increasing emphasis on sustainable practices, many organisations have attempted to leverage their supply chain performance towards balancing triple bottom line dimensions (economic, environmental and social perspectives). This paper, therefore, determines the priorities of sustainable supply chain management focusing on eco-design. Interpretive structural modelling (ISM) and Matriced’ Impacts Croise’s Multiplication Appliquée a UN Classement (MIMAC) are used to identify the hierarchical structure of the relationships among eco-design dimensions, and to analyse characteristics power of each dimension on supporting eco-design practices. The relationships and characteristics power of each dimension are used to determine indicators that are effective in enhancement of eco-design practice, evaluated through sustainable supply chain performance. Results indicate that product deployment is an important approach for improving eco-design practice towards sustainable supply chain management. This emphasises the purpose and impact of eco-design on sequential supply chain activities at deployment phase. Further research is required to make an overall assessment of eco-design practices across range of manufacturing industries, given the current research is based on inputs from a limited number of experts of selected organisations.     

Application of a permethrin immunosorbent assay method to residential soil and dust samples

A low-cost, high throughput bioanalytical screening method was developed for monitoring cis/trans-permethrin in dust and soil samples. The method consisted of a simple sample preparation procedure [sonication with dichloromethane followed by a solvent exchange into methanol:water (1:1)] with bioanalytical detection using a magnetic particle enzyme-linked immunosorbent assay (ELISA). Quantitative recoveries (83–126 %) of cis/trans-permethrin were obtained for spiked soil and dust samples. The percent difference of duplicate ELISA analyses was within ± 20 % for standards and ± 35 % for samples. Similar sample preparation procedures were used for the conventional gas chromatography/mass spectrometry (GC/MS) analysis except that additional cleanup steps were required. Recoveries of cis/trans-permethrin ranged from 81 to 108 % for spiked soil and dust samples by GC/MS. The ELISA-derived permethrin concentrations were highly correlated with the GC/MS-derived sum of cis/trans-permethrin concentrations with a correlation coefficient (r) of 0.986. The ELISA method provided a rapid qualitative screen for cis/trans-permethrin in soil and dust while providing a higher sample throughput with a lower cost as compared to the GC/MS method. The ELISA can be applied as a complementary, low-cost screening tool to prioritize and rank samples prior to instrumental analysis for exposure studies.     

Challenges in assessing the toxic effects of polycyclic aromatic hydrocarbons to marine organisms: a case study on the acute toxicity of pyrene to the European seabass (Dicentrarchus labrax L.)

The acute toxicity (96 h) of pyrene (PY) to European seabass (Dicentrachus labrax) juveniles assessed in a semi-static bioassay (SSB) with medium renewal at each 12 h, and in a static bioassay (SB) without medium renewal was compared in laboratorial conditions (water PY concentrations: 0.07-10 mg L⁻¹). Main findings in the SSB that assessed mainly the toxicity of PY and its metabolites were: increased levels of bile PY metabolites in good agreement with the profile of lipid peroxidation levels (LPO) in exposed fish relating PY exposure and oxidative damage; increased levels of PY-type compounds in the brain indicating their ability to cross the blood-brain barrier; increased levels of these substances in liver and muscle which are edible tissues for humans thus raising concern on potential adverse effects on consumers of fish from PY contaminated areas; a significant inhibition of glutathione S-transferase activity suggesting its involvement in PY detoxication as toxicant scavenger; finally, an almost complete impairment of the swimming velocity at all the PY concentrations linking sub-individual to higher population level effects. In the SB, where the overall toxicity of PY, its metabolites and environmental degradation products was evaluated, 19% and 79% of PY decay in test media was found at 12 and 96 h, respectively. In general, the effects were similar to those of SSB but with significant effects being induced at higher PY concentrations indicating that the parental compound is more toxic than its environmental degradation products. The other main differences relatively to the SSB were: increased levels of PY-type substances in the liver suggesting more accumulation in this organ. Therefore, these findings highlight the need of carefully considering experimental design options when assessing the toxicity of readily degradable substances to marine fish, and stress the importance of taking into consideration the toxicity of environmental degradation products in addition to toxic effects of the parental substance and its metabolites for marine ecological risk assessment.     

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) in breast milk of first-time Irish mothers: impact of the 2008 dioxin incident in Ireland

The 2008 dioxin incident in Ireland resulted in elevated concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) in Irish pork and pork products, due to the consumption of contaminated animal feed by pigs. In order to investigate any resulting impact on the Irish population, these contaminants were measured in pooled breast milk samples from 109 first-time mothers, collected in 2010. A comparison of the results with similar data from 2002 revealed generally lower concentrations of PCDD/Fs and dioxin-like PCBs in the 2010 samples, confirming the declining trend reported by many authors. Contaminant concentration levels for both 2002 and 2010 were generally slightly lower than those reported internationally, with a mean combined PCDD/F and PCB WHO-TEQ of 9.66 pg g⁻¹ fat, for an overall pooled sample of milk from 2010. An apparent slight increase in PCDFs was observed between 2002 and 2010 (from 2.73 pg WHO-TEQ g⁻¹ fat to 3.21 pg WHO-TEQ g⁻¹ fat), with the main contributory congener being 2,3,4,7,8-PentaCDF. While it cannot be totally discounted that the slight increase in 2,3,4,7,8-PentaCDF and in the overall PCDF WHO-TEQ in breast milk could be attributable to consumption of Irish pork during the 2008 incident, we consider that it is more likely that this was due to other factors, including the predominantly urban/industrial sampling locations for the 2010 samples, compared to 2002.     

Pesticide residue dynamics in passion fruits: Comparing field trial and modelling results

We evaluated the exposure to pesticides from the consumption of passion fruits and subsequent human health risks by combining several methods: (i) experimental field studies including the determination of pesticide residues in/on passion fruits, (ii) dynamic plant uptake modelling, and (iii) human health risk assessment concepts. Eight commonly used pesticides were applied onto passion fruits cultivated in Colombia. Pesticide concentrations were measured periodically (between application and harvest) in whole fruits and fruit pulp. Measured concentrations were compared with predicted residues calculated with a dynamic and crop-specific pesticide uptake model, namely dynamiCROP. The model accounts for the time between pesticide application and harvest, the time between harvest and consumption, the amount of spray deposition on plant surfaces, uptake processes, dilution due to crop growth, degradation in plant components, and reduction due to food processing (peeling). Measured and modelled residues correspond well (r² = 0.88-0.99), with all predictions falling within the 90% confidence interval of the measured values. A mean error of 43% over all studied pesticides was observed between model estimates and measurements. The fraction of pesticide applied during cultivation that is eventually ingested by humans is on average 10⁻⁴-10⁻⁶, depending on the time period between application and ingestion and the processing step considered. Model calculations and intake fractions via fruit consumption based on experimental data corresponded well for all pesticides with a deviation of less than a factor of 2. Pesticide residues in fruits measured at recommended harvest dates were all below European Maximum Residue Limits (MRLs) and therefore do not indicate any violation of international regulatory thresholds.