Cell absorption induced desorption of hydrophobic organic contaminants from digested soil residue

Oral ingestion of contaminated soil is an important pathway of human exposure to hydrophobic organic contaminants (HOCs), particularly for children in developing countries. The mobilization potential of various contaminants from ingested soil is often characterized using an in vitro gastrointestinal model, based on the quantities of contaminants remaining in digestive fluid after digestion and separation. Recently, it was experimentally demonstrated that a large fraction of mobilized contaminants sorbed on the digested residue could be released if the dissolved fraction was removed by intestinal absorption. This hypothesis was further tested in this study. Soil spiked with dichlorodiphenyltrichloroethane and its metabolites (DDXs) and polycyclic aromatic hydrocarbons (PAHs) was digested using an in vitro gastrointestinal model. A human colon carcinoma cell line (Caco-2) was cultured in digestive fluid with or without soil residue (pre-equilibrated with the soil) for 2 h. A large proportion of the contaminants (37-68%) was sorbed on the digested residue. Without this residue, 66 ± 13% of DDXs and 73 ± 14% of PAHs dissolved in the fluid, as means and standard deviations, were absorbed by the cell monolayer after exposure. With both digestive fluid and residue, the sorbed fraction of PAHs and DDXs decreased by 38-92%, while the ratios of the cellular to the dissolved concentrations were 2.7-2.8 times higher than those without the residue. This supported the hypothesis that the cell absorption of dissolved HOCs induces desorption of the sorbed fraction from digestive residue, and the desorbed HOCs can be absorbed as well.     

Nano-textured polysilicon solar absorption films

Nano-textured polysilicon (poly-Si) solar absorption films are to be applied to the solar receiver of solar thermal electricity Stirling engine. These films were fabricated by deposition of hydrogenated amorphous silicon films (a-Si:H) into poly-Si films, using the pulse-wave modulation plasma and furnace annealing of the a-Si:H films. This is followed by wet etching of poly-Si films into nano-textured structures. The films are then coated with a-SiN_x:H films as the antireflection and protection layers. It was observed that increasing the pulsed plasma turn-on (t_on) time leads to deposition of less dense a-Si:H film with high hydrogen content and void density. This results in films having low dielectric constant and refractive index, and high optical bandgap. Less-dense a-Si:H film can be transferred into large grain size poly-Si film, using annealing. Also, highly rough nano-textured surface structure can be produced, by etching. The denser a-Si:H film, large grain size poly-Si film, and nano-textured surface poly-Si film can enhance the absorbance of sunlight and reduce the emissivity of far infrared light. The nano-textured poly-Si film coated with an a-SiN_x:H layer can effectively increase the absorbance of sunlight to approximately 85% and reduce the emissivity of far infrared light to 49%. The nano-textured poly-Si/a-SiN_x:H films can be used as efficient solar absorption films for solar thermal electricity Stirling engine.     

Chemical Valorization of Forest and Agricultural By-Products. Obtention,Chemical Characteristics,and Mechanical Behavior of a Novel Family of Hydrophobic Films

Abstract

Esterification of hemicelluloses of the xylan family was performed in order to produce hydrophobic films. Acylation reactions were carried out with lauroyl chloride in the N,N-dimethylacetamide/lithium chloride homogeneous system using 4-dimethylaminopyridine as activator and were induced by microwave irradiation. In the experimental conditions used, 108 and 172% mass ratios were obtained for the dodecyl-grafted xylan and heteroxylan, respectively. The degrees of substitution (DS) were 1.3 (maximum 2) for xylan and 1.2 (maximum 2.1) for heteroxylan. These products were further characterized by FT-IR spectroscopy. The mechanical and thermomechanical behavior of this new family of hydrophobic films were analyzed and compared to those obtained from cellulose with a similar DS by the means of tensile tests. Our results indicate that the dodecyl-grafted xylan film presents the best rigidity—resistance to traction ratio.     

A comparison of exposure methods for SPME-based bioavailability estimates

The ability of polydimethlysiloxane coated solid phase microextraction (SPME) fibers to predict bioavailability has been documented for a number of species and compounds. There are also a variety of established methods for establishing SPME-based bioavailability estimates; however, factors such as time until equilibrium and exposure regimen could affect fiber concentrations and have not yet been thoroughly tested. Exposure time may influence SPME fiber concentrations at equilibrium. Co-exposure of the fibers with different animals or the invertebrate species used could yield different estimates than those acquired using a shaker table system to achieve equilibrium between the sediment and SPME fibers. The current study examined the effects of time and exposure method (shaker table versus co-exposure with test species) on SPME fiber concentrations for two hydrophobic compounds: permethrin and p,p′-dichlorodiphenyldichloroethylene (DDE). An additional experiment with permethrin determined whether animal densities or fiber number influenced fiber concentrations. There were significant differences between the time required for SPME fibers to reach equilibrium when co-exposed with different species or separately, but fiber concentrations at equilibrium among treatments for both compounds were similar. Furthermore, among the 12 variations in species and fiber densities, there were no significant differences among treatments indicating that neither the route of exposure, animal density, nor fiber volume influenced SPME fiber estimates. This demonstrated that SPME fiber concentrations at equilibrium were not affected by exposure conditions, increasing their versatility in environmental assessments.     

Effective collection of hydrophobic organic pollutants in water with aluminum hydroxide and hydrophobically modified polyacrylic acid

Polyacrylic acid was hydrophobically modified with dodecylamine and used as a coagulant for coprecipitation of hydrophobic organic pollutants from water. The polymer coagulant induced effective aggregation of aluminum hydroxide having hydrophobic regions which are essential for the incorporation of hydrophobic organic pollutants. Recoveries of the organic pollutants increased with increasing the dodecylamine content, which indicated that the dodecylamine moiety played an important role in the formation of hydrophobic area on the precipitate. Different hydrophobic organic pollutants that had hardly been removed by the conventional coprecipitation were successfully collected by the proposed method.     

城市垃圾填埋场渗滤液中污染物检测与分析

垃圾渗滤液水质复杂,危害性大,对其无害化处理尚未得到很好解决。溶解性有机物(DOM)是导致渗滤液处理难以达标的主导性污染物。采用GC-MS技术可将渗滤液中DOM标识划分为亲水性和疏水性两类物质,为DOM的针对性处理提供了新的思路。采用ICP-AES从渗滤液中检测出美国环境保护局颁布的13种优先污染重金属中的11种,其含量大幅超标。废弃的电子材料、颜料涂料、电池以及药物等物质的不分类收集是导致渗滤液中重金属浓度超标、毒性增强的主要原因。在垃圾渗滤液处理领域,认为BOD5/COD小于0.3就不可以采用生物法处理的传统观点已经不符合实验与工程现实。通过检测与分析,掌握了垃圾渗滤液的水质特性与污染源头,能够为制定切实可行的处理方案提供借鉴。     

Low accessibility and chemical activity of PAHs restrict bioremediation and risk of exposure in a manufactured gas plant soil

Composting of manufactured gas plant soil by a commercial enterprise had removed most of its polycyclic aromatic hydrocarbons (PAHs), but concentrations remained above regulatory threshold levels. Several amendments and treatments were first tested to restart the PAH degradation, albeit with little success. The working hypothesis was then that PAHs were “stuck” due to strong sorption to black carbon. Accessibility was measured with cyclodextrin extractions and on average only 4% of the PAHs were accessible. Chemical activity of the PAHs was measured by equilibrium sampling, which confirmed a low exposure level. These results are consistent with strong sorption to black carbon (BC), which constituted 59% of the total organic carbon. Composting failed to remove the PAHs, but it succeeded to minimize PAH accessibility and chemical activity. This adds to accumulating evidence that current regulatory thresholds based on bulk concentrations are questionable and alternative approaches probing actual risk should be considered.     

水体中常见无机阳离子对TiO_2薄膜光催化还原Cr(Ⅵ)的影响

选择了6种水体中常见的阳离子(Na+、Mg2+、Ca2+、Al3+、Cu2+、Ni2+),分别考查了其对TiO2薄膜光催化还原Cr(Ⅵ)的影响;从光吸收、无机离子本身的性质对光生电子的捕获及传递等讨论了上述离子影响TiO2薄膜光催化还原Cr(Ⅵ)的反应速率的原因。结果表明:由于其不能捕获光生电子,Na+、Mg2+、Ca2+本身对TiO2薄膜光催化还原Cr(Ⅵ)的反应速率影响不大;Al3+吸引电子能力较强,成为光生电子和Cr(Ⅵ)之间的桥梁,促进了Cr(Ⅵ)的还原;浓度为1 mmmol/L时,Cu2+显著地促进了Cr(Ⅵ)的光催化还原,其主要原因是Cu2+捕获光生电子的能力很强,起到了催化剂的作用,而浓度大于10 mmol/L时,Cu2+形成单质Cu以及对紫外光的吸收都使促进作用降低;Ni2+未充满的d轨道具有获得并传递光生电子的能力,也促进了Cr(Ⅵ)的还原;在浓度同为1mmol/L时,对Cr(Ⅵ)光催化还原的促进作用依次为:Cu2+Al3+Ni2+Na+、Ca2+、Mg2+。     

Diffusive gradient in thin FILMS (DGT) compared with soil solution and labile uranium fraction for predicting uranium bioavailability to ryegrass

The usefulness of uranium concentration in soil solution or recovered by selective extraction as unequivocal bioavailability indices for uranium uptake by plants is still unclear. The aim of the present study was to test if the uranium concentration measured by the diffusive gradient in thin films (DGT) technique is a relevant substitute for plant uranium availability in comparison to uranium concentration in the soil solution or uranium recovered by ammonium acetate. Ryegrass (Lolium perenne L. var. Melvina) is grown in greenhouse on a range of uranium spiked soils. The DGT-recovered uranium concentration (C_DGT) was correlated with uranium concentration in the soil solution or with uranium recovered by ammonium acetate extraction. Plant uptake was better predicted by the summed soil solution concentrations of UO₂²⁺, uranyl carbonate complexes and UO₂PO₄⁻. The DGT technique did not provide significant advantages over conventional methods to predict uranium uptake by plants.     

Annual production and molecular weight as an influential factor for environmental distribution of chemicals — a case study in Japan

The changes promoted by treatment of a highly polluted soil with sulphuric acid or calcium hydroxide for changing its pH value are studied by controlling physical properties (particle size, TGA and DTA curves), evolution of metal species (exchangeable, as carbonates, related to Fe‐Mn oxides, linked to organic matter and residual) and metal uptake by plant cultures. Metal contents were determined, after wet digestion with HF—HNO₃—HC1O₄ when necessary, by AAS (Ca, Mg, Cu, Pb, Mn, Fe, Zn) or emission (Na, K). The treatment of soil with successive amounts of sulphuric leads to changes in particle size, hydration properties and exothermic peak for organic matter combustion. Very small changes were, however, detected in the alkaline treatment of soil. Soil treatments do not have practical influence on speciation of some metals (Na, K, Mg, Pb, Mn, Fe), but the intensity of the acid treatment leads to both an increase in the Cu extraction and a decrease in the Ca solubilization, probably through gypsum formation. In the case of zinc a maximum solubility in the middle of the range of acid treatment was observed. The comparison among extractants shows solubilities high for two pollutants (Pb, Cu), associated mainly to Fe—Mn oxides and organic matter, and low for two macrocomponents (Fe, K). The rest of metals, basically present in soil as carbonates or oxides, have intermediate extractions. Pot cultures weights depended mainly on both the treatment of soil (poor development in the more acid sample and drainage difficulties in the rest of acid treatments) and the situation (very low weights in laboratory runs as compared with outside), but the irrigation with water or a diluted sulphuric acid solution (at pH = 4.0) did not produce significant weight changes. Tendencies to increase plant pollution were observed for smaller soil pH, acid irrigation and probably for outside cultures, due to uptake by leaves.