A new approach to determine relieving temperature and thermodynamic behavior of trapped single and multi-phase fluid exposed to fire

Process safety plays a key role in modern industries. This is more significant specifically in off-shore oil and gas platforms where releasing hydrocarbons could cause irreversible damages to both environment and personnel. An important instrument device which can provide safety for process equipment in oil and gas fields is safety relief valve. Correct sizing procedure of such devices depends strongly on physical properties of fluid and relieving condition. The present study revolved around applying thermodynamic concepts and modeling to throw some light on the behavior of trapped fluid exposed to fire in order to evaluate precise temperature and fluid properties at relieving condition. Peng–Robinson equation of state together with a three phase flash has been utilized to handle the calculation. Effect of different design parameters has been evaluated for three distinct categories of fluids namely natural gas, gas-condensate mixture, and gas-oil mixtures. These parameters encompass of operating temperature, operating pressure, Difference of Operating and Design Pressure, gas and oil specific gravities, gas-oil ratio, and water cut. The study depicted that American Petroleum Institute practice number 521 which suggests an ideal gas assumption fails to provide reliable predictions as it significantly overestimate the relieving temperature. Moreover, black oil correlations were also used for the relief temperature estimation of gas-oil-water mixtures. Comparison with HYSYS results as a prominent engineering software proved that black oil models are reliable tools to predict relief temperature.     

A Modeling System to Assess Land Cover Land Use Change Effects on SAV Habitat in the Mobile Bay Estuary

Estuarine ecosystems are largely influenced by watersheds directly connected to them. In the Mobile Bay, Alabama watersheds we examined the effect of land cover and land use (LCLU) changes on discharge rate, water properties, and submerged aquatic vegetation, including freshwater macrophytes and seagrasses, throughout the estuary. LCLU scenarios from 1948, 1992, 2001, and 2030 were used to influence watershed and hydrodynamic models and evaluate the impact of LCLU change on shallow aquatic ecosystems. Overall, our modeling results found that LCLU changes increased freshwater flows into Mobile Bay altering temperature, salinity, and total suspended sediments (TSS). Increased urban land uses coupled with decreased agricultural/pasture lands reduced TSS in the water column. However, increased urbanization or agricultural/pasture land coupled with decreased forest land resulted in higher TSS concentrations. Higher sediment loads were usually strongly correlated with higher TSS levels, except in areas where a large extent of wetlands retained sediment discharged during rainfall events. The modeling results indicated improved water clarity in the shallow aquatic regions of Mississippi Sound and degraded water clarity in the Wolf Bay estuary. This integrated modeling approach will provide new knowledge and tools for coastal resource managers to manage shallow aquatic habitats that provide critical ecosystem services.     

Calibration and Verification of SWMM for Low Impact Development

The Storm Water Management Model was used to simulate runoff and nutrient export from a low impact development (LID) watershed and a watershed using traditional runoff controls. Predictions were compared to observed values. Uncalibrated simulations underpredicted weekly runoff volume and average peak flow rates from the multiple subcatchment LID watershed by over 80%; the single subcatchment traditional watershed had better predictions. Saturated hydraulic conductivity, Manning's n for swales, and initial soil moisture deficit were sensitive parameters. After calibration, prediction of total weekly runoff volume for the LID and traditional watersheds improved to within 12 and 5% of observed values, respectively. For the validation period, predicted total weekly runoff volumes for the LID and traditional watersheds were within 6 and 2% of observed values, respectively. Water quality simulation was less successful, Nash–Sutcliffe coefficients >0.5 for both calibration and validation periods were only achieved for prediction of total nitrogen export from the LID watershed. Simulation of a 100‐year, 24‐h storm resulted in a runoff coefficient of 0.46 for the LID watershed and 0.59 for the traditional watershed. Results suggest either calibration is needed to improve predictions for LID watersheds or expanded look‐up tables for Green–Ampt infiltration parameter values that account for compaction of urban soil and antecedent conditions are needed.     

Development of the Spatial Rainfall Generator (SRGEN) for the Agricultural Policy/Environmental Extender Model

Accurate spatial representation of climatic patterns is often a challenge in modeling biophysical processes at the watershed scale, especially where the representation of a spatial gradient in rainfall is not sufficiently captured by the number of weather stations. The spatial rainfall generator (SRGEN) is developed as an extension of the “weather generator” (WXGEN), a component of the Agricultural Policy/Environmental eXtender (APEX) model. SRGEN generates spatially distributed daily rainfall using monthly weather statistics available at multiple locations in a watershed. The spatial rainfall generator as incorporated in APEX is tested on the Cowhouse watershed (1,178 km²) in central Texas. The watershed presented a significant spatial rainfall gradient of 2.9 mm/km in the lateral (north‐south) directions based on four rainfall gages. A comparative analysis between SRGEN and WXGEN indicates that SRGEN performs well (PBIAS = 2.40%). Good results were obtained from APEX for streamflow (NSE = 0.99, PBIAS = 8.34%) and NO₃‐N and soluble P loads (PBIAS ≈ 6.00% for each, respectively). However, APEX underpredicted sediment yield and organic N and P loads (PBIAS: 24.75‐27.90%) with SRGEN, although its uncertainty in output was lower than WXGEN results (PBIAS: ?13.02 to ?46.13%). The overall improvement achieved in rainfall generation by SRGEN is demonstrated to be effective in the improving model performance on flow and water quality output.     

Stepwise multiple regression method of greenhouse gas emission modeling in the energy sector in Poland

The energy sector in Poland is the source of 81% of greenhouse gas (GHG) emissions. Poland, among other European Union countries, occupies a leading position with regard to coal consumption. Polish energy sector actively participates in efforts to reduce GHG emissions to the atmosphere, through a gradual decrease of the share of coal in the fuel mix and development of renewable energy sources. All evidence which completes the knowledge about issues related to GHG emissions is a valuable source of information. The article presents the results of modeling of GHG emissions which are generated by the energy sector in Poland. For a better understanding of the quantitative relationship between total consumption of primary energy and greenhouse gas emission, multiple stepwise regression model was applied. The modeling results of CO₂ emissions demonstrate a high relationship (0.97) with the hard coal consumption variable. Adjustment coefficient of the model to actual data is high and equal to 95%. The backward step regression model, in the case of CH₄ emission, indicated the presence of hard coal (0.66), peat and fuel wood (0.34), solid waste fuels, as well as other sources (− 0.64) as the most important variables. The adjusted coefficient is suitable and equals R² = 0.90. For N₂O emission modeling the obtained coefficient of determination is low and equal to 43%. A significant variable influencing the amount of N₂O emission is the peat and wood fuel consumption.     

Stepwise multiple regression method of greenhouse gas emission modeling in the energy sector in Poland

The energy sector in Poland is the source of 81% of greenhouse gas (GHG) emissions. Poland, among other European Union countries, occupies a leading position with regard to coal consumption. Polish energy sector actively participates in efforts to reduce GHG emissions to the atmosphere, through a gradual decrease of the share of coal in the fuel mix and development of renewable energy sources. All evidence which completes the knowledge about issues related to GHG emissions is a valuable source of information. The article presents the results of modeling of GHG emissions which are generated by the energy sector in Poland. For a better understanding of the quantitative relationship between total consumption of primary energy and greenhouse gas emission, multiple stepwise regression model was applied. The modeling results of CO₂ emissions demonstrate a high relationship (0.97) with the hard coal consumption variable. Adjustment coefficient of the model to actual data is high and equal to 95%. The backward step regression model, in the case of CH₄ emission, indicated the presence of hard coal (0.66), peat and fuel wood (0.34), solid waste fuels, as well as other sources (-0.64) as the most important variables. The adjusted coefficient is suitable and equals R² = 0.90. For N₂O emission modeling the obtained coefficient of determination is low and equal to 43%. A significant variable influencing the amount of N₂O emission is the peat and wood fuel consumption.     

Structure and Content of the Discourse on Climate Change in the Blogosphere: The Big Picture

Based on the texts of 1.3 million blog posts and the structure of the links between the blogs in which these posts appeared, this study presents an analysis of the discourse on climate change in the English-language blogosphere. Our approach combines community detection with probabilistic topic modeling to show how topics related to climate change are discussed across various parts of the blogosphere. We find that there is one community of predominantly climate skeptical blogs but several accepter communities. The topic analysis reveals a series of issues that are characteristic of the climate change discourse in the blogosphere. Two topics, one related to climate change science and one related to climate change politics, are particularly important for characterizing the discourse. We also find that the distribution of topics over the communities cuts across the divide between skeptics and non-skeptics (accepters) and that there are differences in the patterns of interactions between the skeptics and different groups of accepters.     

Geographic range size and extinction risk assessment in nomadic species

Geographic range size is often conceptualized as a fixed attribute of a species and treated as such for the purposes of quantification of extinction risk; species occupying smaller geographic ranges are assumed to have a higher risk of extinction, all else being equal. However many species are mobile, and their movements range from relatively predictable to‐and‐fro migrations to complex irregular movements shown by nomadic species. These movements can lead to substantial temporary expansion and contraction of geographic ranges, potentially to levels which may pose an extinction risk. By linking occurrence data with environmental conditions at the time of observations of nomadic species, we modeled the dynamic distributions of 43 arid‐zone nomadic bird species across the Australian continent for each month over 11 years and calculated minimum range size and extent of fluctuation in geographic range size from these models. There was enormous variability in predicted spatial distribution over time; 10 species varied in estimated geographic range size by more than an order of magnitude, and 2 species varied by >2 orders of magnitude. During times of poor environmental conditions, several species not currently classified as globally threatened contracted their ranges to very small areas, despite their normally large geographic range size. This finding raises questions about the adequacy of conventional assessments of extinction risk based on static geographic range size (e.g., IUCN Red Listing). Climate change is predicted to affect the pattern of resource fluctuations across much of the southern hemisphere, where nomadism is the dominant form of animal movement, so it is critical we begin to understand the consequences of this for accurate threat assessment of nomadic species. Our approach provides a tool for discovering spatial dynamics in highly mobile species and can be used to unlock valuable information for improved extinction risk assessment and conservation planning.     

Physiologically based pharmacokinetic modeling of perfluoroalkyl substances in the human body

Currently, there are limited data on the levels of perfluoroalkyl substances other than perfluorooctane sulfonic acid and perfluorooctanoic acid in the human body. Most of this information has been extracted from biological monitoring of plasma while the occurrence of perfluoroalkyl substances in other human tissues is rarely studied. The objective of the present study was to develop a physiologically based pharmacokinetic model to assess the concentration of perfluoroalkyl substances in human tissues, based on an existing model previously validated for perfluorooctane sulfonic acid and perfluorooctanoic acid. Experimental data on concentrations of perfluoroalkyl substances in human tissues from individuals in Tarragona County (Catalonia, Spain) were used to estimate the values of some distribution and elimination parameters needed for the simulation. No significant correlations were found between these parameters and the chain lengths. The model was finally validated for five perfluoroalkyl substances.     

Machine learning based quantitative consequence prediction models for toxic dispersion casualty

Incidental release of toxic chemicals can pose extreme danger to life in the vicinity. Therefore, it is crucial for emergency responders, plant operators, and safety professionals to have a fast and accurate prediction to evaluate possible toxic dispersion life-threatening consequences. In this work, a toxic chemical dispersion casualty database that contains 450 leak scenarios of 18 toxic chemicals is constructed to develop a machine learning based quantitative property-consequence relationship (QPCR) model to estimate the affected area caused by toxic chemical release within a certain death rate. The results show that the developed QPCR model can predict the toxic dispersion casualty range with root mean square error of maximum distance, minimum distance, and maximum width less than 0.2, 0.4, and 0.3, which indicates that the constructed model has satisfying accuracy in predicting toxic dispersion ranges under different lethal consequences. The model can be further expanded to accommodate more toxic chemicals and leaking scenarios.