区域环评中大气环境容量估算的研究进展

目前,在大气环境影响评价中,区域大气环境容量的研究是实施大气污染物总量控制的前提.文章综述了大气污染物区域环境容量的主要影响因素、用于其计算的空气质量模型以及大气环境容量研究的一般步骤.现阶段应用较广泛的大气环境容量的预测模型有A-P值法模型、箱模型、线性优化模型、ADMS模型及多种模型相结合的复合模式等,通过研究分析,提出了现阶段大气环境容量研究存在的主要问题及其有效的解决途径.     

Recent developments of surface complexation models applied to environmental aquatic chemistry

1　ＢａｃｋｇｒｏｕｎｄＩｎｇｅｏｃｈｅｍｉｃａｌｃｉｒｃｕｌａｔｉｏｎ ,ｖａｒｉｏｕｓｐｏｌｌｕｔａｎｔｓｗｉｔｈａｄｖｅｒｓｅｉｍｐａｃｔｓ (ｅ .ｇ .,ｔｏｘｉｃｉｔｙ ,ｍｕｔａｇｅｎｉｃｉｔｙａｎｄｌｅｔｈａｌｉｔｙ)ａｒｅｕｓｕａｌｌｙａｓｓｏｃｉａｔｅｄｗｉｔｈｈｅｔｅｒｏｇｅｎｅｏｕｓｐａｒｔｉｃｌｅｓ,ｐｒｅｄｏｍｉｎａｎｔｌｙｃｌａｙｍｉｎｅｒａｌｓ .Ｇｅｎｅｒａｌｌｙ ,ｔｈｅｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅｓｅｃｏｍｐｌｅｘｐａｒｔｉｃｌｅｓｓｈｏｕｌｄｂｅｄｅｓｃｒｉｂｅｄｕｓｉｎ…     

含PVA印染废水的生化动力学研究及其应用

通过对含有聚乙烯醇(PVA)印染废水的生化降解动力学的研究,确定表征微生物生长繁殖、自身氧化等的动力学参数,以此作为生化处理工艺设计的重要依据,使之更符合废水的水质特点,从而提高处理效率;同时,通过掌握其处理过程的规律,为工艺管理、运行效果预测,提供比较明确的控制量。     

活性污泥数学模型中进水易降解有机物的测定

ASM系列模型 (ASMs)自推出以来在欧美得到广泛应用。要想利用ASMs对特定污水处理过程进行准确的模拟 ,首先必须得到该过程污水的水质特性参数。介绍了连续式OUR计量法、序批式OUR计量法和絮凝过滤物理化学法等 3种测定ASMs中进水易降解有机物的方法 ,通过分析比较指出了各自的优缺点及适用情况。     

应用线性和非线性法求解有机物生物降解动力学参数

根据苯甲酸类化合物在水体中不同时间的生化需氧量，用线性和非线性合法对化合物生物降解随时间变化的动力学过程进行曲线拟合，得到各化合物2个数值不同的安全生化需氧量、生物降解速率常数和生物降解滞后期。根据各化合物2种不同的生物降解动力学模型所得到的生化需氧量拟合值与实测值的误差相比较，发现用非线性法拟合得到的有机物生物降解动力学模型，更符合化合物真实生物降解规律，因此用非线性法拟合化合物的生物降解动态变化，比用线性方法更精确。     

农药杀虫单的稻田流失规律研究

通过测坑、人工降雨等手段，对水溶性农药杀虫单的稻田消解动态、渗漏流失和径流流失等进行了研究。结果表明，(1)无水稻时，杀虫单在稻田水中消解的半衰期为0．76d；分蘖初期，杀虫单在稻田水中降解的半衰期为1．02d；平均为0．89d。(2)杀虫单的渗漏流失量在用药后8d内可达总用药量的7％—10％，平均为8．48％。(3)极端情况下，用药当天如果遇暴雨(50mm雨量)，杀虫单的径流流失量将达到用药量的30％左右。杀虫单的渗漏损失不可避免，故其流失控制应从径流损失着手，尽量避免在可能有暴雨的当天或雨前1—2d用药。     

SIMULATION OF TEMPORAL CHANGES IN RAINFALL-RUNOFF CHARACTERISTICS,COON CREEK BASIN,WISCONSIN1

ABSTRACT: Streamflow for 67 years was simulated for Coon Creek at Coon Valley, Wisconsin, for three conditions in the drainage basin: (1) conditions in the 1930s; (2) conditions in the 1970s, excluding flood-detention reservoirs; and (3) conditions in the 1970s, including flood-detention reservoirs. These simulations showed that the changes in agricultural practices over 40 years (1940–80) reduced the 100-year flood by 53 percent (from 38,900 to 18,300 cubic feet per second). The flood-detention reservoirs reduced the 100-year flood by an additional 17 percent (to 15,100 cubic feet per second). The simulation was accomplished by calibrating a precipitation-runoff model to observed rainfall and runoff during two separate periods (1934–40 and 1978–81). Comparisons of model simulations showed that differences between the model calibrations for the two periods were statistically significant at the 95 percent confidence level.     

A COMPARATIVE STUDY OF A SWEDISH AND A CHINESE HYDROLOGICAL MODEL1

ABSTRACT: There are a large number of conceptual hydrological models available today. It is not easy to immediately identify the similarities and differences between the different models. The Swedish HBV model and the Chinese Xinanjiang model are two examples of conceptual, semi-distributed, rainfall-runoff models. The Xinanjiang model was designed for use in humid and semi-humid regions, with no routine for the snowmelt runoff, whereas the snow routine is an important part of the HBV model in many applications. The model structures of the two models may be described in four routines, compared in this paper. The integral structures of them are similar, but there are some differences, especially in the runoff production routine. The physical significance and physical definitions of some model parameters were analyzed. Both models were tested in two basins. Both models gave similar results, and both models performed well in the application. The similarity of the results obtained by different model structures leads to the following two conclusions. First, more effort should probably be spent on the improvement of input data quality and coverage than on the development of more detailed model structures only. Second, inference about basin behavior and characteristics from the values of calibrated model parameters must be made with great caution.     

抽出式通风煤巷掘进过程中粉尘浓度分布规律的数值模拟

根据气固两相流理论，针对矿井掘进工作面的特点，采用计算流体力学的离散相模型（DPM）对掘进工作面通风过程中粉尘浓度进行数值模拟，总结抽出式通风掘进巷道中粉尘浓度的沿程分布及变化规律。