Magnetic particle technology in environmental remediation and wildlife rehabilitation

The use of magnetic particles in environmental remediation and wildlife rehabilitation is currently under investigation at Victoria University, in collaboration with the Phillip Island Research Centre, Victoria, Australia. Iron powder has been shown to be very effective for the magnetic cleansing of feathers and plumage and is almost ideal for this purpose, being non-toxic, a non-irritant and recyclable. Detailed investigations have demonstrated that by varying particle size, particle structure and surface texture, the efficacy of oil removal from feathers and plumage can be successfully manipulated. In this regard, it is possible to identify a grade of iron powder whereby, within experimental error, effectively 100% removal of a variety of fresh contaminants from different matrices, including feathers, can be achieved. Our investigations have been extended to the application of such particles to the successful removal of tarry and weathered/tarry contamination. The results of these investigations have indicated that, for such contaminants, removals ranging from 97–99% may be achieved. Magnetic particle technology may also be adapted for the screening of pre-conditioning agents that can further assist in the removal of tarry and weathered/tarry contamination from feathers. These investigations suggest that magnetic particles could have an important role to play in environmental remediation and wildlife rehabilitation as a clean and effective technology.     

Magnetic composite prepared from palm shell-based carbon and application for recovery of residual oil from POME

Magnetic separation combined with adsorption by activated carbon has been found to be a useful method for removing pollutants. In this paper, the use of palm shell as a source of activated carbon for the removal and recovery of oil from palm oil mill effluent (POME) is studied. In the first part of the study, the properties of samples of activated carbon prepared from palm shell under a variety of different conditions were characterized for their hydrophobicity, surface areas and pore size distribution. The most effective of the activated carbon samples was prepared by impregnation with ZnCl(2) followed by combined physical/chemical activation under carbon dioxide flow at 800 °C. Four grams of these samples adsorbed 90% of the oil from 50 mL POME. In the second part, the palm shell-based carbon samples were given magnetic properties by the technique of iron oxide deposition. Ninety-four percent of the activated carbon/iron oxide composite containing the adsorbed oil could be extracted from the POME by a magnetic bar of 0.15 T. Four grams of the composite can remove 85% of oil from 50 mL POME and a total of 67% of the initial oil can then be recovered by hexane extraction. Powder X-ray diffractometry showed the presence of magnetite and maghemite in the activated carbon/iron oxide composite.     

Clearance and recovery of Cd(II) from aqueous solution by magnetic separation technology

An effective method to actualize the recycling use of Cd(II) in industrial wastewater was developed by using the magnetic beads, which was modified with ethylenediamine. When the industrial wastewater was treated with these magnetic beads, the Cd(II) concentration in the solution was sharply reduced to the governmental standard (0.1 μg mL⁻¹) of China. Based on the monolayer adsorption of Cd(II) on the surface of these magnetic beads, the saturation capacity for Cd(II) reached to 68 mg g⁻¹ dried magnetic beads. On the other hand, the binding Cd(II) could be easily recovered in acid conditions and the recovery efficiency exceeded 99%. Thus, in the process of the wastewater purification, the recycling utilization of Cd(II) was realized. Additionally, the excellent capability of regeneration and recycling utilization of these magnetic beads made this technology much suitable for the large-scale application. Compared with the conventional purification methods, the rapid process, simple equipments, easy operation and high efficiency, brought this technology with great potentialities in the treatment of industrial wastewater.     

Trigger points and systemic effect for EMF therapy

The use of magnetic fields (MFs), in general, and electromagnetic fields (EMFs), in specific, as therapeutic modalities is becoming very common. In the USA, EMFs are mostly used in orthopedics, followed by pain relief and the wound-healing arena. Even though a substantial literature exists worldwide, we are still lacking the accepted comprehensive mechanism(s) of action. In general, it is thought that the best therapeutic effects are achieved when the stimulation is applied directly to the target area. Since the beginning of this century, however, more and more evidence has been collected indicating that effects of the MF stimulation may also be observed at site(s) different from the site of application of the signal. A primary purpose of this paper is to propose a link between the systemic and direct effects. The functional units known as trigger points are discussed as possible “doors” allowing the stimulation to be delivered to the target tissue/organ. A second purpose is to suggest some possible modes of action.     

Role of Chinese wind-blown dust in enhancing environmental pollution in Metropolitan Seoul

A suite of rock magnetic experiments and intensive microscopic observations were carried out on Asian dust deposits in Seoul, Korea, collected on 19 and 23 March 2002, 9 April 2002 and 12 April 2003. Desert-sand and loess from the dust source regions in China were also analyzed as a comparison. Asian dust showed a higher magnetic concentration than the source region samples, indicating a significant influx of magnetic particles into Asian dust had occurred during its transportation. Electron microscopy identified carbon-bearing iron-oxides as the added material. These iron-oxides were likely to have been produced by anthropogenic pollution (fossil fuel combustion) while the wind-blown dusts passing across the industrial areas of eastern China and western Korea. Such wind-paths were confirmed by a simulation of the air-mass trajectories. The magnetic technique appears to be useful for determining the anthropogenic pollution of Asian dust.     

Magnetic anomalies of forest soils in the Upper Silesia-Northern Moravia region

Previous investigations revealed a strong magnetic anomaly due to soil magnetic enhancement in the industrialized cross-border area of Upper Silesia (Poland) and Northern Moravia (Czech Republic). Since industrial and urban dusts contain magnetic particles, this soil magnetic enhancement is assumed to be of anthropogenic origin, caused by a high concentration of atmospherically deposited magnetic particles, accumulated in topsoil layers. This assumption is proved by investigations of vertical profiles of magnetic susceptibility along a transect crossing the border area of the two countries. The results show that the population of magnetic minerals in the organic horizon is different from that in the mineral horizons. The vertical distribution of magnetic susceptibility and thermomagnetic analysis suggests negligible lithogenic contribution. The observed relationship between magnetic susceptibility and some heavy metals, confirmed by micromorphological observations and microchemical analysis of magnetic particles separated from the organic horizons of forest topsoil, has proved the usefulness of soil magnetometry for pollution study.     

Synthesized magnetic nanoparticles coated zeolite for the adsorption of pharmaceutical compounds from aqueous solution using batch and column studies

The contamination of fresh water with pharmaceutical and personal care products (PPCPs) has risen during the last few years. The adsorption of some PPCPs namely, Diclofenac-Na, Naproxen, Gemfibrozil and Ibuprofen from aqueous solution has been studied, magnetic nanoparticles coated zeolite (MNCZ) has been used as the adsorbent. Batch adsorption experiment was conducted to study the influences of different adsorption parameters such as contact time, solution pH and PPCPs concentrations in order to optimize the reaction conditions. The removal was favored at low pH values. Thus, as pH turns from acidic to basic conditions these compounds were less efficiently removed. The initial concentration does not appear to exert a noticeable effect on the removal efficiency of the studied PPCPs at low concentrations, but it showed less removal efficiency during high concentration of PPCPs especially for Ibuprofen. The removal of Diclofenac-Na was independent on time, while the contact time was of significant effect on the adsorption of Naproxen, Gemfibrozil and Ibuprofen even though these compounds were removed up to 95% during 10 min using MNCZ. From the isotherm adsorption study, the adsorption of PPCPs studied on MNCZ was best fitted with Freundlich isotherm equation. Pseudo-second order model providing the best fit model with the experimental data. Column adsorption study was conducted to compare the removal efficiency of MNCZ with other processes used at drinking water treatment plants (DWTPs), MNCZ showed high removal efficiency (>99%) than other used processes at DWTPs.     

Comparison of different combined treatment processes to address the source water with high concentration of natural organic matter during snowmelt period

The source water in one forest region of the Northeast China had very high natural organic matter (NOM) concentration and heavy color during snowmelt period. The efficiency of five combined treatment processes was compared to address the high concentration of NOM and the mechanisms were also analyzed. Conventional treatment can hardly remove dissolved organic carbon (DOC) in the source water. KMnO₄ pre-oxidization could improve the DOC removal to 22.0%. Post activated carbon adsorption improved the DOC removal of conventional treatment to 28.8%. The non-sufficient NOM removal could be attributed to the dominance of large molecular weight organic matters in raw water, which cannot be adsorbed by the micropore upon activated carbon. O₃ + activated carbon treatment are another available technology for eliminating the color and UV₂₅₄ in water. However, its performance of DOC removal was only 36.4%, which could not satisfy the requirement for organicmatter. The limited ozone dosage is not sufficient to mineralize the high concentration of NOM. Magnetic ion-exchange resin combined with conventional treatment could remove 96.2% of color, 96.0% of UV₂₅₄ and 87.1% of DOC, enabling effluents to meet the drinking water quality standard. The high removal efficiency could be explained by the negative charge on the surface of NOM which benefits the static adsorption of NOM on the anion exchange resin. The results indicated that magnetic ion-exchange resin combined with conventional treatment is the best available technology to remove high concentration of NOM.     

Separation/degradation behavior and mechanism for cationic/anionic dyes by Ag-functionalized Fe3O4-PDA core-shell adsorbents

● PDA-Fe₃O₄-Ag was made by hydrothermal and oxidation self-polymerization method. ● PDA-Fe₃O₄-Ag had great magnetic separation performance. ● PDA-Fe₃O₄-Ag had good adsorption and degradation performance for ionic dyes. ● PDA-Fe₃O₄-Ag showed NR and MO degradation potential of 91.2% and 87.5%, respectively. High-performance adsorbents have been well-studied for the removal of organic dye pollutants to promote environment remediation. In this study, an Ag nanoparticle-functionalized Fe₃O₄-PDA nanocomposite adsorbent (PDA-Fe₃O₄-Ag) was synthesized, and the adsorption/separation performance of commonly used cationic and anionic organic dyes by the PDA-Fe₃O₄-Ag adsorbent were assessed. Overall, PDA-Fe₃O₄-Ag exhibited a significantly higher adsorption capacity for cationic dyes compared to anionic dyes, the highest of which was more than 110.0 mg/g (methylene blue (MB)), which was much higher than not only the adsorption capacities of the anionic dyes in this study but also other dye adsorption capacities reported in the literature. The dye adsorption kinetics data fitted well to both the pseudo second-order kinetics model and the Langmuir isotherm model, suggesting a monolayer-chemisorption-dominated adsorption mode. Thermodynamics analysis indicated that the adsorption process was both endothermic and spontaneous. Furthermore, the PDA-Fe₃O₄-Ag adsorbent achieved high photodegradation removal rates of the dyes, especially neutral red (NR) and methyl orange (MO), which were 91.2% and 87.5%, respectively. With the addition of PDA-Fe₃O₄-Ag, the degradation rate constants of NR and MO increased from 0.08 × 10⁻² and 0 min⁻¹ to 2.11 × 10⁻² and 1.73 × 10⁻² min⁻¹, respectively. The high adsorption and photocatalytic degradation performance of the PDA-Fe₃O₄-Ag adsorbent make it an excellent candidate for removing cationic and anionic dyes from the industrial effluents.     

Weak magnetic field accelerates chromate removal by zero-valent iron

Weak magnetic field(WMF) was employed to improve the removal of Cr(VI) by zero-valent iron(ZVI) for the first time. The removal rate of Cr(VI) was elevated by a factor of 1.12–5.89 due to the application of a WMF, and the WMF-induced improvement was more remarkable at higher Cr(VI) concentration and higher p H. Fe2+was not detected until Cr(VI) was exhausted, and there was a positive correlation between the WMF-induced promotion factor of Cr(VI) removal rate and that of Fe2+release rate in the absence of Cr(VI) at pH 4.0–5.5. These phenomena imply that ZVI corrosion with Fe2+release was the limiting step in the process of Cr(VI) removal. The superimposed WMF had negligible influence on the apparent activation energy of Cr(VI) removal by ZVI, indicating that WMF accelerated Cr(VI)removal by ZVI but did not change the mechanism. The passive layer formed with WMF was much more porous than without WMF, thereby facilitating mass transport. Therefore,WMF could accelerate ZVI corrosion and alleviate the detrimental effects of the passive layer, resulting in more rapid removal of Cr(VI) by ZVI. Exploiting the magnetic memory of ZVI, a two-stage process consisting of a small reactor with WMF for ZVI magnetization and a large reactor for removing contaminants by magnetized ZVI can be employed as a new method of ZVI-mediated remediation.