The simultaneous removal of ammonium and manganese from surface water by MeOx: Side effect of ammonium presence on manganese removal

Manganese and ammonium pollution in surface water sources has become a serious issue.In this study, a pilot-scale filtration system was used to investigate the effect of ammonium on manganese removal during the simultaneous removal of ammonium and manganese from surface water using a manganese co-oxide filter film(MeO_x ). The results showed that the manganese removal efficiency of MeO_x in the absence of ammonium was high and stable, and the removal efficiency could reach 70% even at 5.5 °C. When the influent ammonium concentration was lower than 0.7 mg/L, ammonium and manganese could be removed simultaneously. However, at an ammonium concentration of 1.5 mg/L, the manganese removal efficiency of the filter gradually decreased with time(from 96% to 46.20%). Nevertheless, there was no impact of manganese on ammonium removal. The mechanism by which ammonium negatively affected manganese removal was investigated, demonstrating that ammonium affected manganese removal mainly through two possible mechanisms. On one hand, the decreased p H caused by ammonium oxidation was unfavorable for the oxidation of manganese by MeO_x ; on the other hand, the presence of ammonium slowed the growth of new MeO_x and retarded the increase in the specific surface area of the Me Ox-coated sand, and induced changes in the morphology and crystal structure of Me Ox. Consequently, the manganese removal efficiency of the filter decreased when ammonium was present in the inlet water.     

负载Cr和Mo锰矿粉基催化剂的脱硝脱氨性能

氨选择性催化还原 (NH₃-SCR) 技术在焚烧烟气NO_x减排控制中广泛应用。然而,目前广泛商业化使用的SCR催化剂价格昂贵且低温活性差。以价格低廉的天然锰矿粉 (MOP) 为载体,采用浸渍法制备了Cr和Mo负载改性MOP,在温度范围150~400 ℃,对比研究了MOP和负载改性MOP的脱硝和脱氨催化效率,并基于NH₃-TPD-MS、FE-SEM-EDS、XRD和XPS对所制备的催化剂进行表征。结果表明：MOP具有较高的催化脱硝脱氨活性;Cr负载可大幅提升MOP的氨转化率,且对脱硝效率没有明显影响;Cr主要以无定形Cr₂O₃形式物理附着于MOP表面,Cr与Mn之间没有明显的相互作用。同时,Mo负载对MOP的氨催化转化也有明显促进作用,2%Mo负载仅轻微减少了MOP在150~250 ℃时的脱硝效率。在5%Mo改性MOP表面,酸性位点数量和NH₃吸附能力显著提高,但Mo与K反应生成钾钼盐结晶,导致Mn⁴⁺和O_α的相对含量降低。该研究结果可为低温低尘尾部布设SCR的同时脱硝脱氨提供参考。     

大义山东南部土壤重金属分布特征及其风险评价

为探明矿产开采对土壤生态环境的影响,采集大义山岩体东南部土壤样品分析其重金属元素Cu、Pb、Zn、Cr、Ni、Cd、As和Hg浓度;综合利用单因子指数、污染负荷指数和潜在生态危害指数法评估研究区土壤的污染状况与生态风险。结果表明：As、Cd、Pb、Zn和Cu平均浓度分别超出GB 15618—2018《土壤环境质量 农用地土壤污染风险管控标准（试行）》（pH>7.5）标准限值119.70、47.33、6.18、4.67和4.43倍;单因子指数从大到小依次为As>Cd>Pb>Zn>Cu>Cr>Ni>Hg,其中,As、Cd、Pb、Zn和Cu属于重度污染;单项潜在风险指数从大到小依次为Cd>As>Pb>Cu>Zn>Hg>Ni>Cr,土壤综合潜在生态风险指数平均值为2 680.40,属于极强生态风险水平。统计显示,Cu、Zn、Cd、As富集中心位于矿区,Cr、Pb、Ni富集于乡村、矿业生产区等人口活动区域,Hg元素无明显分布规律。相关性与主成分分析表明,土壤中Cu、Zn、Cd、As和Pb、Cr、Ni异常富集分别与矿业开采和人类活动有关,而Hg异常富集则主要源自母质风化与成土作用。

     

扬子型铜矿床矿物稀土元素地球化学

本文较系统研究了扬子型铜矿床中有代表性的菱铁矿、胶黄铁矿、黄铁矿、磁黄铁矿、磁铁矿、黄铜矿及部分脉石矿物的稀土元素组成及特征，总结了展状矿石中和矽卡岩矿石中矿物稀土元素组成的特点及二者之间存在的明显差别，从一个方面探索扬子型铜矿床的成因。     

Oxidant or catalyst for oxidation? The role of manganese oxides in the activation of peroxymonosulfate (PMS)

Manganese oxides (MnO_x) have been demonstrated to be effective materials to activate Oxone (i.e., PMS) to degrade various contaminants. However, the contribution of direct oxidation by MnO_x to the total contaminant degradation under acidic conditions was often neglected in the published work, which has resulted in different and even conflicting interpretations of the reaction mechanisms. Here, the role of MnO_x (as both oxidants and catalysts) in the activation of Oxone was briefly discussed. The findings offered new insights into the reaction mechanisms in PMS-MnO_x and provided a more accurate approach to examine contaminant degradation for water/wastewater treatment.     

炼铁上料系统除尘设计体会点滴

就炼铁高炉矿槽除尘系统的方式，提出了一些革新的措施，涉及到阀门、吸气罩、风幕及控制方法等     

新疆赛都糜棱岩型金矿的矿石矿物学特征

本文首次详细论述了赛都糜棱岩型金矿的矿石类型、矿石组构和金属矿物的特征，对金矿物特征和金的赋存状态作了详细描述，并在矿石矿物学分析基础上提出了该金矿的矿化阶段。     

开发沸石矿用于农业的经济评价

我国沸石矿资源丰富。开发利用沸石矿于农业,可增产粮食400亿公斤,加上节约化肥和用作饲料添加剂等方面,年经济效益为496.25亿元。因此,开发利用沸石矿于农业具有重大的经济意义,从促进我国粮食生产上新台阶的角度考虑,则具有重大的战略意义。     

几种天然矿物去除苯酚效果及日光光解效应评价

本文以四种天然矿物为受试矿物,评价了它们去除苯酚的效果,以及日光光解放应及温度,ＰＨ值,矿物浓度,苯酚初始浓度对去除效果的影响。     

响应面法优化预氧化强化混凝处理铁锰地下水

以KMnO_4为氧化剂,Al_2(SO_4)_3·18H_2O为混凝剂,含铁锰离子地下水为模拟用水,考察预氧化强化混凝法的效果。利用响应面设计试验,分析氧化剂投加量、混凝剂投加量和pH值对铁锰去除的交互作用。模型优化结果显示,在氧化剂投加量4.16 mg/L,混凝剂投加量263.68 mg/L,pH值为7.54的最佳工艺参数下,铁锰去除率分别可达98.22%和97.49%。