Recovery of a marker strain of Salmonella typhimurium in litter and aerosols from isolation rooms containing infected chickens

Abstract

Screening of poultry flocks for foodborne pathogen Salmonella contamination is critical for Salmonella control in preharvest stages of poultry production. In this study, two sampling methods (litter and air filter) were compared for detection of S. typhimurium from experimentally infected chicks some of which had received either a probiotic competitive exclusion culture or transfer of cecal contents from salmonellae‐free adult birds. At 4, 9, and 11 days after inoculation, S. typhimurium samples were enumerated by selective plating. For both types of sampling, the control birds yielded the greatest levels of environmental contamination followed by the samples from the probiotic inoculated birds with the birds receiving the cecal transfer culture having the lowest levels of contamination. Although the two sampling methods responded in a similar fashion, detection sensitivity needs to be increased for air filter sampling.     

Spatial distribution of organochlorine contaminants in soil, sediment, and fish in Bikini and Enewetak Atolls of the Marshall Islands, Pacific Ocean

Several nuclear tests were performed at Enewetak and Bikini Atolls in the Marshall Islands between 1946 and 1958. The events at Bikini Atoll involved several ships that were tested for durability during nuclear explosions, and 24 vessels now rest on the bottom of the Bikini lagoon. Nine soil samples were collected from different areas on the two islands of the atoll, and eighteen sediment, nine fish, and one lobster were collected in the vicinity of the sunken ships. Organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polychlorinated terphenyls (PCTs) in these samples were analyzed using gas chromatography/ion trap mass spectrometry (GC/ITMS). The average recoveries ranged from 78% to 104% for the different PCB congeners. The limits of detection (LOD) for PCBs, PCTs, DDE, DDT, and dieldrin ranged 10-50 pg g⁻¹. Some fish from Enewetak contained PCBs at a concentration range of 37-137 ng g⁻¹, dry weight (dw), and most of the soils from Enewetak showed evidence of PCBs (22-392 ng g⁻¹ dw). Most of the Bikini lagoon sediment samples contained PCBs, and the highest was the one collected from around the Saratoga, an aircraft carrier (1555 ng g⁻¹ dw). Some of the fish samples, most of the soil samples, and only one of the sediment samples contained 2,2-bis(4-chlorophenyl)-1,1-dichloroethylene (DDE) and PCBs. In addition to PCBs, the soils from Enewetak Atoll contained PCTs. PCTs were not detected in the sediment samples from Bikini Atoll. The results suggest local pollution sources of PCBs, PCTs, and OCPs.     

Accumulation and maternal transfer of polychlorinated biphenyls in Steller Sea Lions (Eumetopias jubatus) from Prince William Sound and the Bering Sea, Alaska

The western stock of the Steller sea lion (Eumetopias jubatus) in the northern Pacific Ocean has declined by approximately 80% over the past 30 years. This led to the listing of this sea lion population as an endangered species in 1997. Chemical pollution is a one of several contributing causes. In the present study, 145 individual PCBs were determined in tissues of male sea lions from Tatitlek (Prince William Sound) and St. Paul Island (Bering Sea), and placentae from the Aleutian Islands. PCBs 90/101, 118, and 153 were abundant in all the samples. The mean toxic equivalents (TEQ) were 2.6, 4.7 and 7.4 pg/g lw in the kidney, liver, and blubber samples, respectively. The mean TEQ in placentae was 8 pg/g lw. Total PCBs concentrations (2.6-7.9 μg/g lw) in livers of some males were within a range known to cause physiological effects. Further suggesting the possibility of adverse effects on this stock.     

Polybrominated diphenyl ethers (PBDEs) and indicator polychlorinated biphenyls (PCBs) in marine fish from four areas of China

The levels of polybrominated diphenyl ethers (PBDEs) and indicator polychlorinated biphenyls (PCBs) were determined in marine fish from four areas of China (South China Sea, Bohai Sea, East China Sea, and Yellow Sea) using GC/NCI-MS and GC/ITMS, respectively. Total concentrations of eight PBDEs (BDE-28, 47, 99, 100, 153, 154, 183 and 209) in all samples ranged from 0.3 ng g⁻¹ ww (wet weight) to 700 ng g⁻¹ ww, with median and mean values of 85 ng g⁻¹ ww and 200 ng g⁻¹ ww, respectively. BDE-209 and BDE-47 were the major congeners in all samples, contributing 54% and 19% to the total concentration, respectively. The sum of seven indicator PCB levels (CB-28, 52, 101, 118, 138, 153, and 180) ranged from 0.3 ng g⁻¹ ww to 3.1 μg g⁻¹ ww, with median and mean values of 6.4 ng g⁻¹ ww and 398 ng g⁻¹ ww, respectively. High contributions of CB-138 (32%) and CB-153 (25%) were found in all samples. In general, pollutants measured in this study were at high levels when compared with previous studies from other regions in the world. The relative abundance of BDE-209 may suggest that deca-BDE sources existed in studied area. And principal component analysis (PCA) showed that there were other PBDE sources in Yellow Sea. The pattern and PCA showed that PCB pollutions came from similar sources in the studied areas. In addition, concentrations of ∑₇PBDEs (u/209) were strongly correlated with those of ∑₇PCBs in all fish (r = 0.907, n = 44).     

Marine and farmed fish on the Polish market: comparison of the nutritive value and human exposure to PCDD/Fs and other contaminants

Chemical analyses were performed in nine fish species that are popular on the Polish market. These included Baltic fish (cod, herring, salmon), fish farmed in Poland (carp, trout), marine fish imported from China (Alaska pollock, sole), and farmed fish imported from Vietnam and China (sutchi catfish, tilapia). The nutritional composition (amino acid, micro- and macronutrients, fat-soluble vitamins - A₁, D₃, E) and certain contaminants (organochlorine pesticides, OCPs; indicator polychlorinated biphenyl, PCB₆; polychlorinated dibenzo-paradioxins and polychlorinated dibenzofurans, PCDD/Fs; dioxin-like polychlorinated biphenyls, dl-PCBs; organotin compounds, OCTs; dyes, malachite green and crystal violet; veterinary drug residues, nitrofurans and chloramphenicol; toxic metals, Cd, Pb, Hg) in the muscle tissues of fish were determined. It was confirmed that the fish species analyzed were excellent sources of amino acids, and were rich in phosphorous and selenium. Baltic Sea fish (salmon, herring), fish farmed in Poland (carp and trout), and tilapia were also rich in vitamin D₃.Traces of OCP, PCB₆, OCT, dyes, veterinary drug residues, and heavy metals were detected in concentrations which do not pose a threat to consumers at the current rate of fish consumption in Poland. However, the problem might arise from the content of PCDD/Fs and dl-PCBs in fatty Baltic fish. The fish species analyzed, differed in their nutritional values and degrees of contamination. We suggest that for optimum health and safety, it is advisable that consumers include a variety of different fish species in their diets.     

Estimating marine biogeochemical rates of the carbonate pH system—A Kalman filter tested

Oxygen (O₂), nitrate (NO₃), dissolved inorganic carbon (DIC) or pCO₂, and pH or total alkalinity (TA), are useful indices of marine chemical, physical and biological processes operating on varying time-scales. Although these properties are increasingly being monitored at high frequency, they have not been extensively used for studying ecosystem dynamics. We test whether we can estimate time-evolving biogeochemical rates (e.g. primary production, respiration, calcification and carbonate dissolution, and nitrification) from synthetic high frequency time-series of O₂, NO₃, DIC, pCO₂, TA or pH. More specifically, a Kalman filter has been implemented in a very simplified biogeochemical model describing the dynamics of O₂, NO₃, DIC and TA and linking the concentration data to biogeochemical fluxes. Different sets of concentration data are assimilated and biogeochemical rates are estimated. The frequency of assimilation required to get acceptable results is investigated and is compared with the frequency of sampling in the field or in controlled experimental settings.Smoothing of the data to remove data noise before assimilation improves the estimation of the biogeochemical rates. The best estimated rates are obtained when assimilating O₂, NO₃ and TA although the assimilation of DIC instead of TA also gives satisfactory results. In case pH or pCO₂ is assimilated rather than DIC or TA, the linearization of the (now nonlinear) observation equation introduces perturbations and the Kalman filter behaves suboptimal. We conclude that, given the resolution of data required, the tool has potential to estimate biogeochemical rates of the carbonate system under controlled settings.     

Distribution and persistence of carbaryl in some terrestrial and aquatic components of a forest environment

Abstract

An oil‐based formulation of carbaryl (1‐naphthyl N‐methyl‐carbamate) (Sevin‐2‐Oil) was applied twice by a fixed‐wing aircraft at a dosage rate of 280 g of A.I./ha/application to a coniferous forest near Allardville, New Brunswick. The highest concentrations of the chemical in fir foliage, litter and forest soil 1 h after application were respectively 4.20, 1.21 and 0.59 ppm (fresh weight). The residues dissipated rapidly and the DT50 values obtained from the depletion curves were 2.3 d for foliage and 1.5 d for litter and soil samples. Very low levels (<0.1 ppm) of carbaryl persisted in foliage and litter beyond the 10 d sampling period. The maximum residue level found in stream water was 0.314 ppm and more than 50% of it had dissipated within 1 h. Low but detectable levels (0.001 ppm) of the chemical persisted in water until the end of the 10 d sampling period. Sediment samples contained a maximum level of 0.04 ppm, which dissipated below the detection limit within 5 h. Brook trout and slimy sculpins captured in the stream 1 d after the spray contained on average about 0.04 ppm of carbaryl and none of it was found in 3 d postspray samples.     

Leaching,mobility and persistence of tebufenozide in columns packed with forest litter and soil

Abstract

Leaching, downward mobility and persistence of tebufenozide was investigated under laboratory conditions in columns packed with forest litter and soil, after fortification with the analytical grade material (purity > 99.6%) and with two commercial formulations, RH‐5992 2F (aqueous flowable) and RH‐5992 ES (emulsion suspension). Two types of litter and soil were used: one type with relatively high amounts of sand and the other with high amounts of clay.

The concentrations eluted in the leachates were lower when the analytical material (dissolved in acetone) was used for fortification, than when the two formulations (diluted with water) were used. The amount leached was higher for RH‐5992 2F than for RH‐5992 ES. The type of substrate, i.e., sandy or clay type, had only marginal influence on the amounts eluted in the leachates. Downward movement of tebufenozide from the top 2‐cm layer to the untreated middle and bottom layers (3‐cm segments) was consistently lower when the analytical material was used for fortification, than when the two formulations were used. Downward movement was higher for RH‐5992 2F than for RH‐5992 ES. Persistence of tebufenozide in substrates, maintained under submerged conditions for 70 days after leaching, indicated an initial 2‐week lag period prior to the onset of degradation. Formulation‐related differences were observed in the half‐life (DT₅₀) values. When the analytical material was used for fortification, the DT₅₀ ranged from ca 54 to 59 d. However, when the formulations were used for fortification, the DT₅₀ showed a higher range, i.e., from ca 62 to 67 d for RH‐5992 2F and ca 70 to 80 d for RH‐5992 ES. Formulation ingredients appear to have caused enhanced adsorption of tebufenozide onto the substrates, thus delaying degradation.     

Comments on current environmental events in Kuwait

This article describes and assesses the impact of oil spillage and oil well fires on Kuwait and its surroundings. The marine ecology of the Arabian Gulf is shown to be relatively resistant to damage from oil spillage. The risks of the contamination of thermal desalination plants by oil and oil products are assessed, and remedies are suggested. Air pollution from burning oil wells is described and its consequences are predicted. Editor’s note: Professor Hosny Khordagui worked as a research scientist at the Environmental and Earth Science Department of the Kuwait Institute for Scientific Research. The Iraqi invasion of Kuwait on August 2, 1990, led to the permanent loss of most of his data, research reports, and laboratory equipment, and Prof. Khordagui was constrained to live under the Iraqi occupation for a few weeks. His article “A Conceptual Approach to the Selection of a Control Measure for Residual Chlorine Discharge in Kuwait Bay” will appear in a forthcoming issue ofEnvironmental Management.     

Application of the randomized response technique to marine park management: an assessment of permit compliance

Marine product collecting permits are useful management tools for providing information on usage patterns. Unfortunately, usage parameters based on permit issuance are invariably inaccurate because of permit noncompliance. Since noncompliance is a prosecutable offense, any attempt to estimate the rate of noncompliance by direct survey techniques is met with misleading and evasive responses. It has been shown elsewhere that randomized response designs reduce survey response bias to incriminating questions by ensuring respondent anonymity. With the use of the randomized response survey technique, estimates of permit noncompliance were determined for the Capricornia Section of the Great Barrier Reef Marine Park. Noncompliance with the requirement to obtain the prescribed permit was found to be low whereas, once a permit was obtained, noncompliance with specific permit conditions was considered high. Reasons for the high rate of noncompliance with specific conditions are presented, and it is recommended that marine park managers should not unreservedly base management decisions on usage data derived simply from permit issuance.