Screening for plants and rhizospheral fungi with bioremediation potency of petroleum-polluted soils in a Tehran oil refinery area

The contamination of soils by toxic and/or hazardous organic pollutants, especially with crude oil, is a widespread problem. This study was conducted in a petroleum-contaminated area in a Tehran oil refinery to find petroleum-resistant plants and their rhizospheral fungal strains with bioremediation potency. The plants growing in the oil-polluted area were collected and determined taxonomically. Root samples of the plant species were collected from a polluted area and fungal strains determined by laboratory methods and taxonomical keys. The growth ability of the isolated fungal strains was studied in media containing 1%–15% crude oil. Results showed that seven plant species were of the highest density in the contaminated area: Alhagi persarum, Hordeum marinum, Peganum harmala, Phragmites australis, Prosopis farcta, Salsola kali, and Senecio glaucus. The root-associated fungi were isolated and showed that the fungal variation in the oil-polluted area is higher than that in a non-polluted area. The growth assay of isolated fungal strains showed that all studied fungal strains were able to form colonies at the applied concentrations but Alternaria sp. and Rhizopus sp. were the most resistant ones. Some plants were resistant to oil pollution, which also had positive effects on the fungal strains.     

Trihalomethanes formation in water treatment plants and distribution lines: a monitoring and modeling scheme

Monitoring and modeling of the concentrations of trihalomethanes (THMs) within four water treatment plants (WTPs) and distribution lines in Fayoum City, Egypt, were studied. Sampling sites for raw and treated waters were determined by global positioning system and the Arc geographic information system software was used for mapping. THMs were monitored using 25 sampling points located at the plant exit and through the distribution lines up to the plant extremity. Results indicated that the THMs concentration varied significantly but it was very rarely higher than the allowed maximum contaminant level of 100 μg L^?1. However, at the dead zones in the distribution lines, the THMs increased by about 160% compared to in-plant level. Furthermore, the level of THMs in hot months was about 1.3 times higher than in cold ones. The influence of some independent variables such as temperature, pH, ammonia concentration, total organic carbon and color were investigated by Pearson model to find their correlation with the rate of THMs formation in WTPs. The resulted R values ranged from 0.81 to 0.98. Successful application of the model to a selected region on the distribution lines has resulted in a correlation coefficient of 0.98.     

Mercury pollution in the Sonbhadra district of Uttar Pradesh,India, and its health impacts

The Sonbhadra district in the Singrauli area of Uttar Pradesh, India, has many coal mines and thermal power plants and is a critically polluted area. Many residents of this area reported adverse health conditions which may be linked to metal pollution, especially of mercury investigated here.

In May 2012, samples of water (23), soil (7), blood, hair, and nails from persons showing adverse health conditions selected at random were collected and analyzed for total mercury by atomic absorption spectrometry.

Twenty percent drinking water samples contained mercury from 3 to 26 μg L^?1 (3–26 times the permissible limit). Soil samples had 0.5–10.1 mg kg^?1 Hg.

The average concentrations of mercury in human blood, hair, and nails were found to be 34 μg L^?1, 7.4 mg kg^?1, and 0.8 mg kg^?1, respectively. Mercury concentrations in the blood of these persons were 45 and 28 μg L^?1 on average in the case of men and women. This is much higher than the safe level of 5.8 μg L^?1 set by the United States Environmental Protection Agency (USEPA).

It was concluded that all residents of Sonbhadra sampled could be suffering from mercury toxicity as the area is polluted by Hg released from the coal-fired thermal power plants.     

Testing and evaluation methods for environmental chemicals

Although several polydimethylsiloxane oligomers are taken up by fish after dietary and aqueous exposure, they do not significantly accumulate, despite their high hydrophobicity compared to polychlorinated biphenyls. For both cyclic and linear oligomers with less than fourteen silicon units, this is probably due to short half life times. For all oligomers these were less than 4.5 days. Linear oligomers with more than fourteen silicon units were not detectable in fish, probably due to a lack of uptake.

After dietary exposure the body burden of PDMS oligomers usually never exceeded the daily exposure dose. The biomagnification factors were less than 0.06, whereas for 2, 2’, 5, 5'‐tetrachlorobiphenyl 1.4 was found.

After aqueous exposure, bioconcentration factors were all less than 1200 for PDMS oligomers, and 27,000 for the biphenyl. In addition it was found that the uptake rate constants of the silicon compounds from water by fish were comparable to those of other hydrophobic chemicals such as PCB's. Hence it was concluded that the relatively low bioconcentration and biomagnification factors of PDMS oligomers with less than fourteen silicon units must be explained by rapid elimination, rather than by slow uptake.     

Model reactions of chromium compounds with mammalian and bacterial cells†

Chromate uptake, reduction, cytotoxicity and mutagenicity were studied with human red blood cells, Chinese hamster ovary (CHO) cells and/or Salmonella typhimurium mutant cells. All cell types rapidly took up chromates whereas chromium(III) salts were excluded under the experimental conditions. Red blood cells reduced and accumulated chromium from chromate. At concentrations above 0.1 mM, chromate inactivated the red cell chromate carrier. Chromate above 0.01 mM inhibited CHO cell proliferation irrespective of the cations present. Chromate and two chromium(III) complexes were mutagenic with Salmonella mutants in the Ames’ assay. A model for chromate metabolism and genotoxicity is proposed.     

Detection and quantitation of trace levels of low molecular weight halocarbons (LMHs) associated with commercial sodium humate

Examination of vapor above commercial sodium humate and above 10wt% aqueous humate solution by gas chromatography (GC) revealed the presence of chloroform and trichloroethylene. Further examination of the aqueous humate by the purge and trap procedure confirmed the association of chloroform and trichloroethylene with the humate. GC/mass spectrometry analyses of methylene chloride extract of the humate established the association of LMHs with the humate. Improved headspace capillary GC technique showed that the humate contained not only chloroform, trichloroethylene but several other LMHs in the range 190 to 4000ng·kg^‐1.     

Uptake of cadmium into cells in culture∗

Cadmium has been recognized as pollutant of the environment for many years and numerous studies on its toxic effects have been carried out. Little, however, is known about its metabolic behaviour e.g. why the metal is accumulated so extremely rapidly into the organs of men and animals. Since the study of the individual metabolic steps is very difficult in vivo cell cultures may be used to obtain first indications of what happens in the whole animal.

We used CHO cells in monolayer culture to study the conditions under which the uptake of cadmium occurs. From serumfree medium the metal is accumulated rapidly in the cells. The uptake is inhibited very strongly by the presence of serum or albumin. Accumulation occurs against a concentration gradient and is dependent on the incubation temperature. Below 10°C no cadmium uptake is seen. Several substances which are known to affect cell metabolism have been used to influence cadmium accumulation. Neither inhibitors of energy production nor microtubule or microfilament disruptors showed any substantial effect. In contrast SH‐group blocking agents markedly reduced cadmium uptake.

The results show that cadmium uptake does not occur by passive diffusion but by some active mechanism.     

Uptake and genotoxicity of micromolar concentrations of cobalt chloride in mammalian cells

Literature data concerning the genotoxicity of cobalt salts have been conflicting. To establish appropriate incubation conditions, we conducted a series of uptake studies, before genotoxicity was determined by DNA strand break induction in HeLa cells and mutagenicity in V79 Chinese hamster cells. Co(II) is taken up by HeLa cells in a concentration‐dependent manner and is accumulated inside the cell. The uptake is preceded by a fast association step to the outer membrane, with no saturation up to 24 h. DNA strand breaks as determined by nucleoid sedimentation are induced at concentrations as low as 50μMCoCl₂. The induction is time‐dependent, showing the highest number of breaks after 4h incubation with no further increase up to 24h. CoCl₂ is mutagenic at the HPRT‐locus, enhancing the spontaneous mutation frequency 4.2‐fold at 100μ?. Besides direct interactions with DNA, the mutagenicity of CoCl₂ could also be due to a decrease in the Fidelity of DNA polymerisation.     

Using plants for health: Indigenous knowledge in health care in a tribal region of Bihar,India

While the potential of indigenous knowledge for health care is fully recognised in the literature and by many health professionals, the practices of so many indigenous peoples go unrecorded and untested. Indigenous knowledge remains essentially untapped, an unwritten resource involving information, language and skills in many groups, languages, cultures and environments. An attempt is made in this paper to identify selected indigenous health technologies in a tribal area of Bihar State, India; to describe the treatments, their application and preparation; and to link the traditional practice with the relevant scientific information to test or determine the validity of the practices. These practices were found to be effective in the treatment of a variety of health problems, and most were also scientifically confirmed. The paper argues, however, that other plant uses practised by tribal people still need to be explored: in order to popularise more widely the authenticated practices; to preserve indigenous knowledge; to integrate or blend it with scientific knowledge so that health professionals and healthcare users may benefit from a wider range of healthcare strategies which are environmentally unthreatening.     

Denitrification and phosphorus uptake by DPAOs using nitrite as an electron acceptor by step-feed strategies

Denitrifying phosphorus accumulating organisms (DPAOs) using nitrite as an electron acceptor can reduce more energy. However, nitrite has been reported to have an inhibition on denitrifying phosphorus removal. In this study, the step-feed strategy was proposed to achieve low nitrite concentration, which can avoid or relieve nitrite inhibition. The results showed that denitrification rate, phosphorus uptake rate and the ratio of the phosphorus uptaken to nitrite denitrified (anoxic P/N ratio) increased when the nitrite concentration was 15 mg·L^-1 after step-feeding nitrite. The maximum denitrification rate and phosphorus uptake rate was 12.73 mg NO2-–N·g MLSS-1?h-1 and 18.75 mg PO43-–P·g MLSS-1?h-1, respectively. These rates were higher than that using nitrate (15 mg·L^-1) as an electron acceptor. The maximum anoxic P/N ratio was 1.55 mg PO43--P?mg NO2--N-1. When the nitrite concentration increased from 15 to 20 mg NO2--N?L-1 after addition of nitrite, the anoxic phosphorus uptake was inhibited by 64.85%, and the denitrification by DPAOs was inhibited by 61.25%. Denitrification rate by DPAOs decreased gradually when nitrite (about 20 mg·L^-1) was added in the step-feed SBR. These results indicated that the step-feed strategy can be used to achieve denitrifying phosphorus removal using nitrite as an electron acceptor, and nitrite concentration should be maintained at low level (<15 mg·L^-1 in this study).