You Are What You Eat: Genetically Modified Foods, Integrity, and Society

Thus far, the moral debateconcerning genetically modified foods (GMF) hasfocused on extrinsic consequentialist questionsabout the health effects, environmental impacts,and economic benefits of such foods. Thisextrinsic approach to the morality of GMF isdependent on unsubstantiated empirical claimsand fails to account for the intrinsic moralvalue of food and food choice and theirconnection to the agent's concept of the goodlife. I develop a set of objections to GMFgrounded in the concept of integrity andmaintain that food and food choice can beintimately connected to the agent's personalintegrity. I argue that due to the constitutionof GMF and the manner in which they areproduced, such foods are incompatible with thefundamental values and integrity of certainindividual moral agents or groups. I identifythree types of integrity that are threatened byGMF: religious, consumer, and integrity basedon certain other moral or metaphysical grounds.I maintain that these types of integrity aresufficiently important to provide justificationfor political and societal actions to protectthe interests of those affected. I conclude byproposing specific steps for handling GMFconsistent with the moral principles ofinformed consent, non-maleficence, and respectfor the integrity of all members of society.They include mandatory labeling of GMF, theimplementation of a system for control andregulations concerning such foods, andguaranteed provision of conventional foods.     

Shifts in microbial community structure and diversity in a MBR combined with worm reactors treating synthetic wastewater

The chemical oxygen demand (COD) and NH₃-N removal, membrane fouling, sludge characteristics and microbial community structure in a membrane bioreactor (MBR) coupled with worm reactors (SSBWR) were evaluated for 210 days. The obtained results were compared to those from a conventional MBR (C-MBR) operated in parallel. The results indicated that the combined MBR (S-MBR) achieved higher COD and NH₃-N removal efficiency, slower increase in membrane fouling, better sludge settleability and higher activities of the related enzymes in the activated sludge. Denaturing gradient gel electrophoresis was used to analyze the microbial community structures in the C-MBR and the S-MBR. The microbial community structure in the S-MBR was more diverse than that in the C-MBR. Additionally, the slow-growing microbes such as Saprospiraceae, Actinomyces, Frankia, Clostridium, Comamonas, Pseudomonas, Dechloromonas and Flavobacterium were enriched in the S-MBR, further accounting for the sludge reduction, membrane fouling alleviation and wastewater treatment.     

Effect of oxide nanoparticles on the morphology and fluidity of phospholipid membranes and the role of hydrogen bonds

Engineered oxide nanoparticles (NPs) are widely applied in insulators, catalyzers, paints, cosmetic products, textiles and semiconductors. Their attachment on cell membrane may lead to cytotoxicity. The effects of Al₂O₃, Fe₂O₃, SiO₂, TiO₂ and ZnO NPs on membrane integrity and fluidity were studied using giant or small unilamellar vesicles in this study. Al₂O₃ and SiO₂ NPs disrupted the oppositely charged membrane, indicating the important role of electrostatic attraction. However, Fe₂O₃, TiO₂ and ZnO NPs did not cause serious membrane disruption as Al₂O₃ and SiO₂ NPs. Membrane fluidity was evaluated by the generalized polarity (GP) values of Laurdan fluorescent emission. SiO₂ NPs induce the membrane gelation of both positively and negatively charged membrane. Al₂O₃ and ZnO NPs induced the gelation of the oppositely charged membrane, but did not cause obvious membrane gelation to the like charged membrane. The phospholipid molecular structural changes after NP exposure were analyzed by Fourier transform infrared (FT-IR) spectroscopy. FT-IR spectra revealed the hydrogen bond formation between NPs and the carbonyl/phosphate groups of phospholipids. Al₂O₃ and SiO₂ NPs showed strongest evidence of hydrogen bonding on their FT-IR spectra. It was consistent with the microscopic observation and fluorescent data that Al₂O₃ and SiO₂ NPs caused more serious membrane disruption and gelation. This study on membrane damage provides further knowledge on the cytotoxicity of nanomaterials and the safety of NP application.     

五孔支撑纤维膜在MBR运行中的特性研究

实验室自行研发的PVDF/PMMA/TPU共混体系的五孔支撑膜具有高强度耐冲击的特点,在一定程度上改善了传统中空纤维膜的断丝情况。将选择典型的、具有代表性的MBR工艺流程,采用自主研发的五孔膜制成帘式组件,用于处理经水解酸化后的印染废水。实验讨论了水力停留时间,曝气强度和污泥浓度对于出水水质的影响,最后确定最优的操作条件为:MBR的水力停留时间为20 h,曝气强度为2.45 m/m.h,污泥浓度为4 500 mg/L。     

Modification of the biochemical pathways of plants induced by ozone: what are the varied routes to change?

When plants are observed under a low dose of ozone, some physiological and metabolic shifts occur. Barring extreme injury such as tissue damage or stomata closure, most of these disruptive changes are likely to have been initiated at the level of gene expression. The belief is oxidative products formed in ozone exposed leaves, e.g. hydrogen peroxide, are responsible for much of the biochemical adjustments. The first line of defense is a range of antioxidants, such as ascorbate and glutathione, but if this defense is overwhelmed, subsequent actions occur, similar to systemic acquired resistance or general wounding. Yet there are seemingly unrelated metabolic responses which are also triggered, such as early senescence. We discuss here the current understanding of gene control and signal transduction/control in order to increase our comprehension of how ozone alters the basic metabolism of plants and how plants counteract or cope with ozone.     

松花江流域大型底栖动物生物完整性指数构建及其适用性

利用生物完整性指数评价河流健康状态,对于水环境管理决策具有重要的实践意义。基于大型底栖动物构建生物完整性指数(B-IBI),并评价松花江流域的水生态系统健康状况。在松花江主要干支流设定37个采样点,分别于2016年6、9月进行环境因子和大型底栖动物调查研究。最终从28个候选参数中确定了种类总数、摇蚊种类数、敏感种百分比、Hilsenhoff指数、Marglef指数作为核心参数构建B-IBI。通过0～10赋分法,计算得到了松花江流域全部采样点的生物完整性评价得分。结果显示,松花江流域内60%区域生物状态存在不同程度的损害。另外,B-IBI能够综合反映松花江大型底栖动物群落多样性、生境质量、理化水质等,具有一定的适用性。     

水力停留时间对膜生物反应器复合工艺污水处理特性的影响

开发了厌氧-多级好氧/缺氧-膜生物反应器复合工艺,在不同水力停留时间(HRT)下,考察了系统对污染物去除效果及其膜污染的特性.结果表明,在试验选定的HRT范围内,系统对TN和TP的去除率随着HRT的降低而升高,当HRT为8.70、6.96、4.97 h时,系统对TN和TP的平均去除率分别为73.15%、79.76%、81.98%和67.79%、80.99%、92.16%.但是,较低HRT条件下膜通量较高,会加剧膜污染进程.解决这一问题的措施是增加膜组件个数,从而在不提高膜通量的情况下使系统保持较低的HRT,保证系统高效稳定的污染物去除效果.     

Metabolic uncoupler, 3,3′,4′,5-tetrachlorosalicylanilide addition for sludge reduction and fouling control in a gravity-driven membrane bioreactor

• Effects of metabolic uncoupler TCS on the performances of GDMBR were evaluated. • Sludge EPS reduced and transformed into dissolved SMP when TCS was added. • Appropriate TCS increased the permeability and reduced cake layer fouling. • High dosage aggravated fouling due to compact cake layer with low bio-activity. The gravity-driven membrane bioreactor (MBR)system is promising for decentralized sewage treatment because of its low energy consumption and maintenance requirements. However, the growing sludge not only increases membrane fouling, but also augments operational complexities (sludge discharge). We added the metabolic uncoupler 3,3′,4′,5-tetrachlorosalicylanilide (TCS) to the system to deal with the mentioned issues. Based on the results, TCS addition effectively decreased sludge ATP and sludge yield (reduced by 50%). Extracellular polymeric substances (EPS; proteins and polysaccharides) decreased with the addition of TCS and were transformed into dissolved soluble microbial products (SMPs) in the bulk solution, leading to the break of sludge flocs into small fragments. Permeability was increased by more than two times, reaching 60–70 L/m²/h bar when 10–30 mg/L TCS were added, because of the reduced suspended sludge and the formation of a thin cake layer with low EPS levels. Resistance analyses confirmed that appropriate dosages of TCS primarily decreased the cake layer and hydraulically reversible resistances. Permeability decreased at high dosage (50 mg/L) due to the release of excess sludge fragments and SMP into the supernatant, with a thin but more compact fouling layer with low bioactivity developing on the membrane surface, causing higher cake layer and pore blocking resistances. Our study provides a fundamental understanding of how a metabolic uncoupler affects the sludge and bio-fouling layers at different dosages, with practical relevance for in situ sludge reduction and membrane fouling alleviation in MBR systems.     

The use of nanoparticles in polymeric and ceramic membrane structures: Review of manufacturing procedures and performance improvement for water treatment

Membrane separations are powerful tools for various applications, including wastewater treatment and the removal of contaminants from drinking water. The performance of membranes is mainly limited by material properties. Recently, successful attempts have been made to add nanoparticles or nanotubes to polymers in membrane synthesis, with particle sizes ranging from 4 nm up to 100 nm. Ceramic membranes have been fabricated with catalytic nanoparticles for synergistic effects on the membrane performance. Breakthrough effects that have been reported in the field of water and wastewater treatment include fouling mitigation, improvement of permeate quality and flux enhancement. Nanomaterials that have been used include titania, alumina, silica, silver and many others. This paper reviews the role of engineered nanomaterials in (pressure driven) membrane technology for water treatment, to be applied in drinking water production and wastewater recycling. Benefits and drawbacks are described, which should be taken into account in further studies on potential risks related to release of nanoparticles into the environment.     

Risks of using membrane filtration for trace metal analysis and assessing the dissolved metal fraction of aqueous media--a study on zinc, copper and nickel

Membrane filtration is commonly performed for solid-liquid separation of aqueous solutions prior to trace metal analysis and when assessing “dissolved” metal fractions. Potential artifacts induced by filtration such as contamination and/or adsorption of metals within the membrane have been investigated for different membrane materials, metals, applied pressures and pre-cleaning steps. Measurements have been conducted on aqueous solutions including well-defined metal standards, ultrapure water, and on runoff water from corroded samples.Filtration using both non-cleaned and pre-cleaned filters revealed contamination and adsorption effects, in particular pronounced for zinc, evident for copper but non-significant for nickel. The results clearly show these artifacts to be non-systematic both for non-cleaned and pre-cleaned membranes. The applied pressure was of minor importance.Measurements of the labile fraction by means of stripping voltammetry clearly elucidate that membrane filtration followed by total metal analysis cannot accurately assess the labile or the dissolved metal fraction.