施灰田土壤及所产蔬菜铀、钍和钾、钼、镁、锌含量变化及影响评价

U和Th是放射性元素,K、Fe、Mo、Mg和Zn是植物生长需要的必要营养元素。粉煤灰中U、Th、Fe和Mo的含量略高于空白土壤中Fe和Mo的含量,K、Mg和Zn的含量低于空白土壤中K、Mg和Zn的含量。掺施粉煤灰并没有引起施灰土壤及所产蔬菜中各元素含量的明显变化。与国家土壤环境质量标准及食品、卫生标准的限值相比,施灰土壤及所产蔬菜的U、Th、K、Fe、Mo、Mg和Zn的含量均在正常范围内波动。     

Trace elements, organochlorines, polycyclic aromatic hydrocarbons, dioxins, and furans in lesser scaup wintering on the Indiana Harbor Canal

During the winter of 1993-94, male lesser scaup (Aythya affinis) were collected on the heavily polluted Indiana Harbor Canal (IHC), East Chicago, IN, USA, and examined for tissue contaminant levels. Lesser scaup collected on the IHC had higher concentrations of cadmium (Cd), mercury (Hg), selenium (Se), polychlorinated biphenyls (PCBs), selected organchlorine pesticides, polychlorinated dibenzodioxins, polychlorinated dibenzofurans, polycyclic aromatic hydrocarbons, and aliphatic hydrocarbons than reference birds. Of the scaup collected on the IHC, 44% had Cd concentrations in the liver considered above background for freshwater waterfowl (>3 microg/g dry wt.), 50% had Se concentrations in the liver above a level possibly harmful to the health of young and adult birds (>33 microg/g dry wt.), and 88% of the scaup carcasses exceeded the PCB human consumption guidelines for edible poultry in the USA (>3.0 microg/g lipid wt.). The ratio of pristane:n-heptadecane concentrations in 47% of lesser scaup collected on IHC was elevated above 1.0, which is indicative of chronic exposure to petroleum hydrocarbons.     

Relation between extracellular polymers' composition and its ability to complex Cd,Cu and Pb

Activated sludges originated from wastewater treatment plants (WWTPs) play an important role in heavy metal removal from effluents. Extracellular polymers (ECP) form a major part of the activated sludge and are heavily involved in biosorption of heavy metals. The complexation of three heavy metals (Cd, Cu and Pb) with ECP extracted from six activated sludges, originated from different WWTPs, was investigated at pH 7.

ECP in the study were shown to be mainly composed of proteins, humic acids, uronic acids and polysaccharides along with smaller amounts of lipids and nucleic acids. IR spectra confirmed the presence of the functional groups usually found in the ECP and the content in each fraction was determined using colorimetric methods. The determination of surface charge was carried out on each ECP sample and allowed two pK_a values characteristic of two distinctive functional groups to be determined. At the pH used in the study, the value of these constants indicates that only one functional group is under protonated form.

A polarographic method was used to determine the complexation parameters (number of binding sites and complexation constant) of ECP solutions towards metals. The following orders were established for the number of binding sites: Cu > Pb  Cd and for the stability of the ECP–metal complex: Cd > Pb  Cu.

A matrix of correlation between the composition of the polymers and the complexation parameters showed that the number of binding sites and the complexation constant were strongly linked to proteins, polysaccharides and humic substances content.     

Effect of surface coatings, grain size, and ionic strength on the maximum attainable coverage of bacteria on sand surfaces

The injection of bacteria in the subsurface has been identified as a potential method for in situ cleanup of contaminated aquifers. For high bacterial loadings, the presence of previously deposited bacteria can result in decreased deposition rates--a phenomenon known as blocking. Miscible displacement experiments were performed on short sand columns (approximately 5 cm) to determine how bacterial deposition on positively charged metal-oxyhydroxide-coated sands is affected by the presence of previously deposited bacteria. Approximately 8 pore volumes of a radiolabeled bacterial suspension at a concentration of approximately 1 x 10(9) cells ml-1 were introduced into the columns followed by a 2-pore-volume flush of cell-free buffer. It was found that the presence of Al- and Fe-coated sand increased both deposition rates and maximum fractional surface coverage of bacteria on the sediment surfaces. The effect of grain size on maximum bacterial retention capacity, however, was not significant. Decreasing ionic strength from 10(-1) to 10(-2) M KCl resulted in noticeable decreases in sticking efficiency (alpha) and maximum surface coverage (thetamax) for clean silica sand--results consistent with DLVO theory. In columns containing positively charged Al- and Fe-coated sands, however, changes in alpha and thetamax due to decreasing ionic strength were minimal. These findings demonstrate the importance of geochemical controls on the maximum bacterial retention capacity of sands.     

Particulate matter pollution in Kunshan High-Tech zone: Source apportionment with trace elements, plume evolution and its monitoring

Particulate matter(PM) in the Kunshan High-Tech zone is studied during a three-month campaign. PM and trace elements are measured by the online pollution monitoring, forecastwarning and source term retrieval system AS3. Hourly measured concentrations of PM_(10), PM_(2.5) and 16 trace elements in the PM_(2.5) section(Ca, Pb, Cu, Cl, V, Cr, Fe, Ti, Mn, Ni, Zn, Ga, As, Se, Sr, Ba)are focused. Source apportionment of trace elements by Positive Matrix Factorization modeling indicates that there are five major sources, including dust, industrial processing, traffic,combustion, and sea salt with contribution rate of 23.68%, 21.66%, 14.30%, 22.03%, and 6.89%,respectively. Prediction of plume dispersion from concrete plant and traffic emissions shows that PM_(10) pollution of concrete plant is three orders of magnitude more than that of the traffic. The influence range can extend to more than 3 km in 1 hr. Because the footprint of the industrial plumes is constantly moving according to the local meteorological conditions, the fixed monitoring sites scattered in a few hundred meters haven't captured the heaviest pollution plume at the local scale of a few km~2. As a more intensive monitoring network is not operationally possible, the use of online modeling gives accurate and quantitative information of plume location, which increases the spatial pollution monitoring capacity and improves the understanding of measurement data. These results indicate that the development of the AS3 system, which combines monitoring equipment and air pollution modeling systems, is beneficial to the real-time pollution monitoring in the industrial zone.     

垃圾衍生燃料灰渣中主要元素变化的研究

以垃圾衍生燃料(RDF)为研究对象,在600~1100℃条件下灼烧RDF灰渣,对灰渣中的主要元素变化情况进行分析.研究结果表明,RDF灰渣中主要元素包括硅、氧、铝、钙、镁、钾、钠、碳、硫、氯、磷、钛、锌等;灰渣中的可溶盐倾向富集在≤0.3 mm的灰渣颗粒上;在600~1000℃范围内,其总量处于动态平衡,在1100℃则大幅度减少.随着温度的上升,碳转化为二氧化碳气体;硫元素转化为硫酸盐,随后部分再转化为二氧化硫气体;氯元素转化为以氯化钠和氯化钾为主的氯化盐,在达到一定温度时发生相变转化为气体.硅、氧、铝、钙、镁、磷等元素留存于废渣中,随着温度提高,发生复合化学反应,相互键接形成复合硅酸盐物质.     

改性天然植物胶对Cu~(2+)的吸附性能研究

以自制的重金属捕集剂MPC对Cu2+离子进行吸附实验,取得了良好的效果,并对吸附过程的动力学和热力学进行初步探讨。实验还表明,MPC可以实现洗脱再生和重复利用。MPC是由废弃植物渣皮中提取天然植物胶通过系列化学反应改性而成,实现了资源的综合利用,具有经济和环境的双重效益。     

环境痕量污染物及其防控对策

随着工业化、城市化发展,越来越多的各种人造化学品被释放到环境中来,引发以POPs,PTS,PBT,EDCs等痕量污染物为主要特征的第三代环境问题。本文从环境科学的角度提出一个新的环境管理概念——环境痕量污染物（ETPs）,并分析ETPs的污染特征来形成新的环境管理领域,并提出中国ETPs防控的若干对策,为解决中国经济社会发展中出现新的突出的环境问题提供指导。     

吸附法处理重金属废水研究进展

对吸附法处理重金属废水的研究进展进行了综述,包括吸附机理、影响吸附的相关因素和常用吸附剂及其应用,同时展望了吸附法处理重金属废水的发展方向。     

广州市生活饮用水地表水源地微量元素调查

对广州市秀全、巴江、江村、石门、西村、刘屋洲、南洲和沙湾等主要生活饮用水地表水源地中钼、钴、铍、硼、锑、镍、钒、钛、锡、银和钡等微量元素含量水平进行了调查,并采用单因子污染指数法和内梅罗综合污染指数法对微量元素水质进行了评价。结果表明,硼和锡在所有地表水源地均未检出,铍在部分地表水源地有检出,其他检测项目在所有地表水源地均有检出。整体而言,微量元素含量水平不高,地表水源地由北往南微量元素内梅罗指数呈逐渐降低态势,南部水源地水质优于北部水源地。巴江和西部水源地镍含量相对较高,电镀企业排污监管力度有待进一步加强。