Review on the study of mercury/silver ions-pyrimidine base pairs in DNA duplexes and their application in detection technology北大核心CSCD

Nucleic acids and their analogues are getting more and more attention. Metal-mediated base pairs as a kind of simple and functionalized nucleic acids in special positions have widened the scope of application of functional nucleic acids and their analogues. In this type of base pairs, the representative is the interaction between metal ions and pyrimidine bases, especially the research on thymine-Hg2+-thymine (T-Hg2+-T) and cytosine-Ag+-cytosine (C-Ag+-C) base pairs. This review summarizes the structure and mechanism of metal-mediate pyrimidine base pairs as well as the application in the biochemical analysis. It explores the mode and ratio of coordination between metal ions and base pairs, the effects on the stability of DNA helical structure, the related crystal structure and the three-dimensional configuration information in the DNA helix. The analytical application mainly includes various probes of metal ions, small molecules, protein and the detection of single nucleotide polymorphism. Among them the most widely used metal ions detection, and its combination with spectrum technology, visualization and amplification technology greatly promoted the rapid development of sensitive detection technology. In further studies, it is necessary to reveal the mechanism of interaction between T-Hg2+-T and C-Ag+-C, and more attention should be paid to combining of T-Hg2+-T and C-Ag+-C base pairs with other new technologies. The scope of practical application should also be further extended.     

Reclamation with phytoremediation of area affected by sewage sludge at the Thessaloniki Wastewater Treatment Plant in Sindos (Greece)

The present research focused on the experimental investigation of phytoreclamation of areas affected by sewage sludge disposal and improving the quality of the sludge. It was conducted in two stages: laboratory and pilot applications. This paper reports on the first stage, which tested, under greenhouse conditions, the possibility of using various species of plants cultivated in the sludge from the Thessaloniki Wastewater Treatment Plant (ThWWTP, Greece) with different amendments. The results of the 30-day experiment showed that the quality of the output sludge material varied significantly in comparison to the input sludge material. These variations were considered as positive, as the output sludge obtained texture and structure, aeration conditions were improved, and the content of some trace metals, excess nutrients (e.g., P), and salts (of Na) were reduced. These were all influenced by both the type of treatment and the plant species used. In conclusion, the best treatments, T1, T3, and T4 (soil/sludge mixture 70%/30%, soil/sludge/gravel mixture 50%/25%/25%, and soil/sludge/gravel mixture 45%/45%/10%, respectively), and the best suited plant species, Helianthus annuus L. and Zea mays L., were proposed to be used in the pilot application (in situ) at the site within the ThWWTP.     

Genomic analyses of metal resistance genes in three plant growth promoting bacteria of legume plants in Northwest mine tailings, China

To better understand the diversity of metal resistance genetic determinant from microbes that survived atmetal tailings in northwest of China, a highly elevated level of heavymetal containing region, genomic analyses was conducted using genome sequence of three native metal-resistant plant growth promoting bacteria (PGPB). It shows that: Mesorhizobium amorphae CCNWGS0123 contains metal transporters from P-type ATPase, CDF (Cation Diffusion Facilitator), HupE/UreJ and CHR (chromate ion transporter) family involved in copper, zinc, nickel as well as chromate resistance and homeostasis. Meanwhile, the putative CopA/CueO system is expected to mediate copper resistance in Sinorhizobium meliloti CCNWSX0020 while ZntA transporter, assisted with putative CzcD, determines zinc tolerance in Agrobacterium tumefaciens CCNWGS0286. The greenhouse experiment provides the consistent evidence of the plant growth promoting effects of these microbes on their hosts by nitrogen fixation and/or indoleacetic acid (IAA) secretion, indicating a potential in-site phytoremediation usage in themining tailing regions of China.     

Rice: Reducing arsenic content by controlling water irrigation

<正>Arsenic has long been recognized as a poison.Arsenic in water supplies that are used for both drinking and crop irrigation can expose many people chronically to elevated levels of arsenic.The main health concern for chronic exposure to arsenic is the development of cancer.Although the World Health Organization(WHO)recommends that total arsenic in drinking water should be under 10μg/L(or 10 ppb),(WHO,2011),some regions     

The potential leaching and mobilization of trace elements from FGD-gypsum of a coal-fired power plant under water re-circulation conditions

Experimental and geochemical modelling studies were carried out to identify mineral and solid phases containing major, minor, and trace elements and the mechanism of the retention of these elements in Flue Gas Desulphurisation (FGD)-gypsum samples from a coal-fired power plant under filtered water recirculation to the scrubber and forced oxidation conditions. The role of the pH and related environmental factors on the mobility of Li, Ni, Zn, As, Se, Mo, and U from FGD-gypsums for a comprehensive assessment of element leaching behaviour were also carried out. Results show that the extraction rate of the studied elements generally increases with decreasing the pH value of the FGD-gypsum leachates. The increase of the mobility of elements such as U, Se, and As in the FGD-gypsum entails the modification of their aqueous speciation in the leachates; UO₂SO₄, H₂Se, and HAsO₂ are the aqueous complexes with the highest activities under acidic conditions. The speciation of Zn, Li, and Ni is not affected in spite of pH changes; these elements occur as free cations and associated to SO₄² in the FGD-gypsum leachates. The mobility of Cu and Mo decreases by decreasing the pH of the FGD-gypsum leachates, which might be associated to the precipitation of CuSe₂ and MoSe₂, respectively. Time-of-Flight mass spectrometry of the solid phase combined with geochemical modelling of the aqueous phase has proved useful in understanding the mobility and geochemical behaviour of elements and their partitioning into FGD-gypsum samples.     

The potential leaching and mobilization of trace elements from FGD-gypsum of a coal-fired power plant under water re-circulation conditions

Experimental and geochemical modelling studies were carried out to identify mineral and solid phases containing major, minor, and trace elements and the mechanism of the retention of these elements in Flue Gas Desulphurisation (FGD)-gypsum samples from a coal-fired power plant under filtered water recirculation to the scrubber and forced oxidation conditions. The role of the pH and related environmental factors on the mobility of Li, Ni, Zn, As, Se, Mo, and U from FGD-gypsums for a comprehensive assessment of element leaching behaviour were also carried out. Results show that the extraction rate of the studied elements generally increases with decreasing the pH value of the FGD-gypsum leachates. The increase of the mobility of elements such as U, Se, and As in the FGD-gypsum entails the modification of their aqueous speciation in the leachates; UO₂SO₄, H₂Se, and HAsO₂ are the aqueous complexes with the highest activities under acidic conditions. The speciation of Zn, Li, and Ni is not affected in spite of pH changes; these elements occur as free cations and associated to SO₄ ² in the FGD-gypsum leachates. The mobility of Cu and Mo decreases by decreasing the pH of the FGD-gypsum leachates, which might be associated to the precipitation of CuSe₂ and MoSe₂, respectively. Time-of-Flight mass spectrometry of the solid phase combined with geochemical modelling of the aqueous phase has proved useful in understanding the mobility and geochemical behaviour of elements and their partitioning into FGD-gypsum samples.     

基于MATLAB的城市表层土壤重金属污染空间分布的研究

为全面了解某城市表层土壤重金属污染的空间分布特征,对城市表层土壤中重金属元素As、Cd、Cr、Cu、Hg、Ni、Pb、Zn进行采样分析,采用域法识别特异值进行数据处理。通过Matlab软件,利用克里格法进行空间插值,绘出各重金属浓度与各坐标投影的一维空间分布图,并绘出全城等高地形图,再以数字大小标注样本点的污染浓度,拟合各元素浓度与海拔、平面坐标之间的关系模型,将重金属空间分布特征定量化、模型化。     

Effect of cooling rate and laser process parameters on additive manufactured Fe–Ti–C metal matrix composites microstructure and carbide morphology

In this paper, laser additive manufacturing (LAM) of Fe–TiC composite coating on AISI 1030 carbon steel is investigated using a numerical and experimental method. In order to have a desired result using LAM, it is crucial to understand the effects of the process parameters’ values on the TiC morphology and microstructure. For this purpose, the LAM process is numerically simulated in order to calculate cooling rate and peak temperature. Experimental data and numerical results are in good agreement in terms of the phase development. Results show that cooling rate plays a crucial role in phase transformation in the clad, however, final microstructure strongly depends on the cooling rate and powder's chemical composition. Two main carbide morphologies (i.e. dendritic and particulate) are studied and relevant cooling rates are detected. Based on this paper and developed map, it is possible to control the cooling rate in order to achieve specific carbide morphologies in the clad. In this study, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) are used to characterize clads’ microstructure.     

自动消解仪-ICP法测定土壤中7种重金属离子实验研究

利用自动消解仪对土壤进行前处理,建立了电感耦合等离子体发射光谱法(ICP-OES)同时测定Cu、Zn、Ni、Cr、Sr、V、Co七种重金属元素含量的方法。该方法的相关系数均在3个9以上。测定了国家标准物质GBW07429土壤中的元素,测定值与标准值一致,相对标准偏差1.6%~4.5%,检出限0.000 2~0.005 mg/L。利用建立的方法测定了天津市土壤中的七种重金属元素含量,为土壤中重金属元素含量的测定提供了简单可靠的分析方法。     

原子荧光光谱法测定环境水体中痕量锡研究

在对环境水进行检测时,一个非常重要的项目就是对锡含量进行检测,所以,运用准确、灵敏的测定方法对环境水体中痕量锡进行检测具有非常重要的意义。文章将结合实验,在对环境水体中的痕量锡进行测定时,运用原子荧光光谱法,对测定环境水体中痕量锡的方法进行了一定的研究。采用原子荧光光谱法测定环境水体中的痕量锡,方法检出限是0.10μg/L,相对标准偏差0.20%~0.90%,实际样品加标回收率为98%~102%,满足环境监测实验室分析测定要求,值得推广。