华北地区下古生界海相烃源岩芳烃生物标志物地球化学特征──兼论饱和烃、芳烃生源组合特征

本文详细总结了华北地区下古生界海相烃源岩中芳烃生物标志物特征，主要包括菲系列、联苯系列、苯并芴系列，三芴系列、荧蒽系列、芘系列、苯并荧蒽和苯并芘系列、　系列和三芳甾烷系列，而萘系列含量较低。我们发现三芳甾烷C(28)（20S）／C(28)（20R）比值似乎显示了较好的热演化特征。     

反气相色谱法测定麦饭石对苯类的吸附

以麦饭石为吸附质，采用反气相色谱法测定了载气流量、麦饭石装柱质量和载气湿度对吸附等温线测定的影响，测定了苯等４种挥发性芳香类有机物在麦饭石颗粒上的吸附焓。结果表明，在水蒸汽存在的条件下，苯等４种挥发性有机物在麦饭石颗粒上的吸附能遵循理想气相色谱方程，且测得的吸附焓和其蒸发焓较接近。     

Petroleum waste biodegradation with porous biomass support system (PBSS) on rotating biological contactor

A laboratory scale study was conducted to assess the feasibility of the new coupling of rotating biological contactor (RBC) plus porous biomass support system (PBSS) using polyurethane foam as porous support media to biodegrade petroleum refinery wastewater. Polyurethane foam was attached on disks of two four-stage laboratory scale cascade connected RBC units.The two RBC units were operated simultaneously at different but constant, flowrates giving hydraulic loading rates of 0.01, 0.02, 0.03, 0.04 m3/m2/d in two runs keeping the same rotational speed 10 r/min throughout. Organic loading was a less controllable factor in this study.For all of the hydraulic loadings, it was found that the removal efficiency of total chemical oxygen demand (TCOD) and oil were above 80 percent. Ammonia nitrogen and phenol removal were above 90 and 80 percent respectively. The maximum biomass concentration within polyurethane foam was about 30 g/m2 in the first stage for 0.03 m3/m2/d hydraulic loading.The results show that t     

电场耦合高效液相色谱柱改善极性芳烃分离的研究

从燃烧的煤和油中排放出来的极性污染物,包含有多种含氮、氧和硫的极性多环芳烃(PAH),这些极性组分比非极性组分常具有更强的致癌和致突变性。目前,正相高效液相色谱(NP-HPLC)常被用来分离分析这类极性组分。 但是,要提高这些极性组分分离的选择性,现大多采用梯度洗脱的方法。也就是改变流动相极性的方法。本文介绍了一种高压电场耦合色谱柱的新方法。这种技术除了具     

煤矿区表层土壤中芳香烃组成、分布特征及标志化合物研究

采用GC-MS技术分析了平顶山市石龙区土壤样品中多环芳烃(PAHs)污染物的化学组成及分布特征,共鉴定出78种代表性化合物,包括11种US EPA优控PAHs.结果表明,总体上土壤样品中单体烃菲、荧蒽、芴、芘含量比较高.在不同功能区域芳烃含量差别较大,采矿区及焦化厂区土壤中芳烃含量明显高于污灌区和农业区,而煤矸石山附近土壤中芳烃含量最高.采矿区、焦化厂区和污灌区土壤中低环数PAHs的比例远大于高环数PAHs,农业区反之.通过对(ρ)MP/(ρ)P、MPI1、(ρ)P/(ρ)A、(ρ)FL/(ρ)PY等参数值的分析认为,煤尘、烟灰沉降是石龙区土壤中PAHs积累的主要影响因素.由单体烃与PAHs的相关性分析得知,苊和蒽可作为煤矿区域表层土壤中PAHs的标志性污染物.     

Evaluation of the biodegradability of copolyesters containing aromatic compounds by investigations of model oligomers

Model oligo esters of terephthalic acid with 1,2-ethanediol, 1,3-propanediol, and 1,4-butanediol have been investigated with regard to their biodegradability in different biological environments. Well-characterized oligomers with weight-average molar masses of from 600 to 2600 g/mol exhibit biodegradation in aqueous systems, soil, and compost at 60°C. SEC investigations showed a fast biological degradation of the oligomer fraction consisting of 1 or 2 repeating units, independent of the diol component used for polycondensation, while polyester oligomers with degrees of polymerization higher than 2 were stable against microbial attack at room temperature in a time frame of 2 months. At 60°C in a compost environment chemical hydrolysis also degrades chains longer than two repeating units, resulting in enhanced degradability of the oligomers. Metabolization of the monomers and the dimers as well by the microorganisms could be confirmed by comparing SEC measurements and carbon balances in a Sturm test experiment. Based on these results degradation characteristics of potential oligomer intermediates resulting from a primary chain scission from copolyesters consisting of aromatic and aliphatic dicarbonic acids can be predicted depending on their composition. These results will have an evident influence on the evaluation of the biodegradability of commercially interesting copolyesters and lead to new ways of tailor-made designing of new biodegradable materials as well.     

Oil/Suspended Particulate Material Interactions and Sedimentation

The interactions of physically dispersed oil droplets with suspended particulate material (SPM) can be important for the transport of bulk quantities of spilled crude oil and polycyclic aromatic hydrocarbons (PAH) to subtidal sediments. The literature regarding oil/SPM interactions is reviewed, and results from whole-oil droplet/SPM interaction kinetics and pure-component (Prudhoe Bay crude oil distillate cut) equilibrium partitioning experiments are presented. The effects of oil type, SPM characteristics, and salinity on the interaction rates are examined, and the importance of whole-oil droplet/SPM interactions on particle agglomeration and settling behavior are discussed. Whole-oil droplet/SPM interactions are retarded as oil droplet dispersion into the water column is inhibited by oil viscosity increases due to evaporation weathering and water-in-oil emulsification. Compared to whole oil droplet/SPM interactions, dissolved-component/SPM adsorption is not as significant for transport of individual components to sediments. The information presented in this paper can be used to augment computer-based models designed to predict oil-spill trajectories, oil-weathering behavior, and spilled oil impacts to the marine environment.     

Evidence for biodegradation and volatilisation of dissolved petroleum hydrocarbons during in situ air sparging in large laboratory columns

Laboratory column experiments run for up to 13 days compared air sparging of groundwater contaminated by dissolved petroleum hydrocarbons in sterile and non-sterile aquifer sediments as well as uncontaminated sediments and groundwater. Loss of dissolved BTEX compounds in the contaminated columns was very rapid, occurring through volatilisation. The majority of the dissolved total organic carbon (TOC) persisted for much longer periods however. A direct comparison between losses from sterile and non-sterile columns suggested a negligible contribution of biodegradation to the removal of TOC. This was difficult to confirm through examination of O₂ utilisation because oxidation of a small amount of reduced sulphur in the aquifer materials was the dominant sink for O₂. Despite this, it was possible to conclude that less than 22% of the removal of TOC was through biodegradation during the first three days of air sparging.     

The influence of degree of substitution on blend miscibility and biodegradation of cellulose acetate blends

In this account, we report our findings on blends of cellulose acetate having a degree of substitution (DS) of 2.49 (CA2.5) with a cellulose acetate having a DS of 2.06 (CA2.0). This blend system was examined over the composition range of 0–100% CA2.0 employing both solvent casting of films (no plasticizer) and thermal processing (melt-compressed films and injection molding) using poly(ethylene glycol) as a common plasticizer. All thermally processed blends were optically clear and showed no loss in optical quality after storage for several months. Thermal analysis and measurement of physical properties indicate that blends in the middle composition range are partially miscible, while those at the ends of the composition range are miscible. We suggest that the miscibility of these cellulose acetate blends is influenced primarily by the monomer composition of the copolymers. Bench-scale simulated municipal composting confirmed the biodestructability of these blends and indicated that incorporation of a plasticizer accelerated the composting rates of the blends.In vitro aerobic biodegradation testing involving radiochemical labeling conclusively demonstrated that both the lower DS CA2.0 and the plasticizer significantly enhanced the biodegradation of the more highly substituted CA2.5.While this work was in progress, Robert Gardner was struck with cancer and died on June 6, 1995. This paper is dedicated to his memory and to his contributions as a friend and colleague.     

钻井液化学剂可生物降解性研究

实验测定了16种钻井液化学剂的BOD_5和COD_cr，并计算其BOD_5／COD_cr比值。提出了以BOD_5／COD_cr的比值划分钻井液化学剂可生物降解性的分级标准，并对16种钻井液化学剂的可生物降解性进行分级，为其应用提供依据。