A review of sediment predictive techniques as viewed from the perspective of nonpoint pollution management

User-oriented criteria for the evaluation of physically based management models are presented. These criteria emphasize the utility rather than the elegance of the model. The standards are then applied to efforts at predicting non-point pollutant loadings. In particular a critical review of sediment pollution is used as the basis for the evaluation of sediment yield models as management tools. A wide range of sediment yield models are rated and recommendations for their use are made.     

Energy conservation and thermal comfort in a New York city high rise office building

Detailed analysis of an energy conservation program implemented on a 46 story government building is presented. Conservation was achieved by reduced lighting, changes in building operating hours, thermostat settings of 20C (68F) in the winter and 27C (80F) in the summer, and the elimination of air conditioning reheat. As a result, energy consumption in the summer was reduced by 54 percent. A survey of the occupants' thermal comfort and the insulating value of thei r clothing was taken. In the summer 68 percent were comfortable compared with 80 percent in the winter. The insulating value of the clothing worn by the women was consistently less than that of the men; the difference was largest in the summer. Though the temperatures in the occupied spaces were not as cold or as warm as the thermostat settings, the survey indicates that comfort could be improved if occupants dressed more appropriately for the expected thermal environment of the work place.An energy analysis with a building simulation program (NBSLD) was also undertaken. The simulated energy consumption was within 5 percent of the measured values. Additional large savings may be achieved in this and similar buildings through a reduction in the energy cost of transporting air and chilled and hot water around the building for the environmental control systems.     

Numerical modeling of oxygen exclusion experiments of anaerobic bioventing

A numerical and experimental study of transport phenomena underlying anaerobic bioventing (ABV) is presented. Understanding oxygen exclusion patterns in vadose zone environments is important in designing an ABV process for bioremediation of soil contaminated with chlorinated solvents. In particular, the establishment of an anaerobic zone of influence by nitrogen injection in the vadose zone is investigated. Oxygen exclusion experiments are performed in a pilot scale flow cell (2 x 1.1 x 0.1 m) using different venting flows and two different outflow boundary conditions (open and partially covered). Injection gas velocities are varied from 0.25 x 10(-3) to 1.0 x 10(-3) cm/s and are correlated with the ABV radius of influence. Numerical simulations are used to predict the collected experimental data. In general, reasonable agreement is found between observed and predicted oxygen concentrations. Use of impervious covers can significantly reduce the volume of forcing gas used, where an increase in oxygen exclusion efficiency is consistent with a decrease in the outflow area above the injection well.     

Geochemical evaluation of different groundwater–host rock systems for radioactive waste disposal

The geochemical suitability of a deep bedrock repository for radioactive waste disposal is determined by the composition of geomatrix and groundwater. Both influence radionuclide solubility, chemical buffer capacity and radionuclide retention. They also determine the chemical compatibility of waste forms, containers and backfill materials. Evaluation of different groundwater–host rock systems is performed by modeling the geochemical environments and the resulting radionuclide concentrations. In order to demonstrate the evaluation method, model calculations are applied to data sets available for various geological formations such as granite, clay and rocksalt.The saturation state of the groundwater–geomatrix system is found to be fundamental for the evaluation process. Hence, calculations are performed to determine if groundwater is in equilibrium with mineral phases of the geological formation. In addition, corrosion of waste forms in different groundwater is examined by means of reaction path modeling. The corrosion reactions change the solution compositions and pH, resulting in significant changes of radionuclide solubilities. The results demonstrate that geochemical modeling of saturation state and compatibility of the host formation environment with the radioactive waste proves to be a feasible tool for evaluation of various sites considered as deep underground repositories.     

Production and characterization of bioaerosols for model validation in spacecraft environment

This study aimed to evaluate the suitability of two bioaerosol generation systems(dry and wet generation) for the aerosolization of microorganisms isolated from the International Space Station, and to calibrate the produced bioaerosols to fulfill the requirements of computational fluid dynamics model(CFD) validation. Concentration, stability, size distribution, agglomeration of generated bioaerosol and deposition of bioaerosols were analyzed. In addition, the dispersion of non-viable particles in the air was studied.Experiments proved that wet generation from microbial suspensions could be used for the production of well-calibrated and stabile bioaerosols for model validation. For the simulation of the natural release of fungal spores, a dry generation method should be used. This study showed that the used CFD model simulated the spread of non-viable particles fairly well. The mathematical deposition model by Lai and Nazaroff could be used to estimate the deposition velocities of bioaerosols on surfaces, although it somewhat underestimated the measured deposition velocities.     

Model of technological alternatives of production of sodium chromate (VI) with the use of chromic wastes

This article presents a mathematical model which describes the sodium chromate (VI) production process with the use of chromic waste as a substitution of natural raw materials. This model is a function of selected process parameters common for all of the examined alternatives and based on equations of material balance. Optimization of the elaborated technological alternatives of the production process with use of recycling of chromic waste has been evaluated by determining the extreme value of the quality indicator WJ. This indicator defines the quantity of waste created in the process. Optimization results enabled the selection of the optimal technological solution from all of the alternatives possible for use in industrial practice. Negative values of the indicator prove that there is the possibility of introducing to the process a larger quantity of waste than the one obtained in the process and transported to the storage heaps.     

TM法与分块耦合技术生成复杂结构计算网格的研究

讨论运用网格生成微分法中的TM方法以及分块耦合技术,构造复杂结构在笛卡尔直角坐标系下的三维伪极坐标计算网格系统和三维直角坐标计算网格系统,为复杂结构形状的流体动力学计算和燃烧过程数值模拟打下坚实的基础。     

Analytical model for site-specific isotope fractionation in 13C during sorption: determination by isotopic 13C NMR spectrometry with vanillin as model compound

The aim of this study was to conceive a reactive transport model capable of providing quantitative site-specific enrichment factors for fractionation in ¹³C isotopic content during sorption. As test compound the model treats vanillin, for which the ¹³C isotopic content at natural abundance at each of the 8 carbon positions can be measured by quantitative ¹³C nuclear magnetic resonance spectrometry. This technique determines the isotope ratios with a resolution better than ±1‰ (0.1%) at each carbon position. Site-specific isotope fractionations were recorded in chromatography column experiments with silica RP-18 as stationary phase. The one dimensional reactive transport model accounted for the sorption/desorption behavior of 8 individual ¹³C-isotopomers and one ¹²C-isotopomer of vanillin and reproduced satisfactorily the bulk (average over the whole compound) fractionation observed during elution. After model calibration, the enrichment factors were fitted for each carbon site where a significant fractionation was recorded. To show the interest of such a transport model for environmental studies, the model, extended to three dimensions, was exploited to simulate reactive transport in an aquifer. These results show that significant ¹³C isotope fractionation is expected for 4 out of 8 ¹³C-isotopomers in vanillin, and illustrate that bulk isotope ratios measured by conventional compound specific isotope analysis and mass spectrometry would hardly document significant isotope fractionations in vanillin. It is concluded that modeling of site-specific isotope ratios in molecules is a priori feasible and may help to quantify unknown processes in the environment.     

Predicted changes in summertime organic aerosol concentrations due to increased temperatures

Changes in summertime organic aerosol (OA) concentrations in the Eastern U.S. are investigated for different temperature change scenarios using the chemical transport model PMCAMx-2008. OA is simulated using the volatility basis set approach, assuming that the primary emissions are semi-volatile and that the intermediate volatile and semi-volatile organic compounds are oxidized in the gas phase, resulting in products with lower volatility. For the basic temperature change scenario where biogenic emissions are kept constant, ground-level OA decreases by −0.3% K⁻¹ on average. Increases in the north (+0.1% K⁻¹) and decreases in the south (−0.5% K⁻¹) are predicted. The effect of the uncertain temperature dependence of the aging rate constant is modest, changing the OA by only 0.1% K⁻¹ over the temperature-independent case. For the more realistic scenario in which biogenic OA precursor emissions are allowed to increase with temperature (up to 10% K⁻¹), however, average OA increases by 4.1% K⁻¹, with even higher increases in southern regions. These results suggest that as temperature increases, complicated changes in production, partitioning and chemical aging will take place. Nevertheless, the change in biogenic emissions and subsequent production of biogenic OA is more than an order of magnitude more important than the changes in the rates of chemical and physical atmospheric processes.     

Eutrophication Status of Marine Environment of Mumbai and Jawaharlal Nehru Ports

The marine environment of Mumbai and Jawaharlal Nehru ports was monitored for some environmental and biological parameters during three different periods between 2001 and 2002. The results are compared with the records available since 1960s. With the passage of time the environmental status underwent changes, probably due to the increase in anthropogenic activities in the metropolis. The nutrient level especially the nitrate concentration has increased gradually over the years with a simultaneous decrease in dissolved oxygen, indicating increase in the biological activity. Characterization of this environment based on Assessment of Estuarine Trophic Status (ASSETS) model indicates that the current status is poor and may get worsen in future if no appropriate management policies are put into place.