Interactions of Physical, Chemical, and Biological Weather Calling for an Integrated Approach to Assessment, Forecasting, and Communication of Air Quality

This article reviews interactions and health impacts of physical, chemical, and biological weather. Interactions and synergistic effects between the three types of weather call for integrated assessment, forecasting, and communication of air quality. Today’s air quality legislation falls short of addressing air quality degradation by biological weather, despite increasing evidence for the feasibility of both mitigation and adaptation policy options. In comparison with the existing capabilities for physical and chemical weather, the monitoring of biological weather is lacking stable operational agreements and resources. Furthermore, integrated effects of physical, chemical, and biological weather suggest a critical review of air quality management practices. Additional research is required to improve the coupled modeling of physical, chemical, and biological weather as well as the assessment and communication of integrated air quality. Findings from several recent COST Actions underline the importance of an increased dialog between scientists from the fields of meteorology, air quality, aerobiology, health, and policy makers.     

Modelling of iron cycling and its impact on the electron balance at a petroleum hydrocarbon contaminated site in Hnevice, Czech Republic

Over a period of several decades multiple leaks of large volumes from storage facilities located near Hnevice (Czech Republic) have caused the underlying Quaternary aquifer to be severely contaminated with nonaqueous phase liquid (NAPL) petroleum hydrocarbons. Beginning in the late 1980's the NAPL plume started to shrink as a consequence of NAPL dissolution exceeding replenishment and due to active remediation. The subsurface was classified geochemically into four different zones, (i) a contaminant-free zone never occupied by NAPL or dissolved contaminants, (ii) a re-oxidation zone formerly occupied by NAPL, (iii) a zone currently occupied by NAPL, and (iv) a lower fringe zone between the overlying NAPL and the deeper underlying contaminant-free zone. The study investigated the spatial and temporal variability of the redox zonation at the Hnevice site and quantified the influence of iron-cycling on the overall electron balance. As a first step inverse geochemical modelling was carried out to identify possible reaction models and mass transfer processes. In a subsequent step, two-dimensional (forward) multi-component reactive transport modelling was performed to evaluate and quantify the major processes that control the geochemical evolution at the site. The study explains the observed enrichment of the lower fringe zone with ferrihydrite as a result of the re-oxidation of ferrous iron. It suggests that once the NAPL zone started to shrink the dissolution of previously formed siderite and FeS by oxygen and nitrate consumed a significant part of the oxidation capacity for a considerable time period and therefore limited the penetration of electron acceptors into the NAPL contaminated zone.     

Evaluating equilibrium and non-equilibrium transport of bromide and isoproturon in disturbed and undisturbed soil columns

In this study, displacement experiments of isoproturon were conducted in disturbed and undisturbed columns of a silty clay loam soil under similar rainfall intensities. Solute transport occurred under saturated conditions in the undisturbed soil and under unsaturated conditions in the sieved soil because of a greater bulk density of the compacted undisturbed soil compared to the sieved soil. The objective of this work was to determine transport characteristics of isoproturon relative to bromide tracer. Triplicate column experiments were performed with sieved (structure partially destroyed to simulate conventional tillage) and undisturbed (structure preserved) soils. Bromide experimental breakthrough curves were analyzed using convective-dispersive and dual-permeability (DP) models (HYDRUS-1D). Isoproturon breakthrough curves (BTCs) were analyzed using the DP model that considered either chemical equilibrium or non-equilibrium transport. The DP model described the bromide elution curves of the sieved soil columns well, whereas it overestimated the tailing of the bromide BTCs of the undisturbed soil columns. A higher degree of physical non-equilibrium was found in the undisturbed soil, where 56% of total water was contained in the slow-flow matrix, compared to 26% in the sieved soil. Isoproturon BTCs were best described in both sieved and undisturbed soil columns using the DP model combined with the chemical non-equilibrium. Higher degradation rates were obtained in the transport experiments than in batch studies, for both soils. This was likely caused by hysteresis in sorption of isoproturon. However, it cannot be ruled out that higher degradation rates were due, at least in part, to the adopted first-order model. Results showed that for similar rainfall intensity, physical and chemical non-equilibrium were greater in the saturated undisturbed soil than in the unsaturated sieved soil. Results also suggested faster transport of isoproturon in the undisturbed soil due to higher preferential flow and lower fraction of equilibrium sorption sites.     

Modelling geochemical and microbial consumption of dissolved oxygen after backfilling a high level radiactive waste repository

Dissolved oxygen (DO) left in the voids of buffer and backfill materials of a deep geological high level radioactive waste (HLW) repository could cause canister corrosion. Available data from laboratory and in situ experiments indicate that microbes play a substantial role in controlling redox conditions near a HLW repository. This paper presents the application of a coupled hydro-bio-geochemical model to evaluate geochemical and microbial consumption of DO in bentonite porewater after backfilling of a HLW repository designed according to the Swedish reference concept. In addition to geochemical reactions, the model accounts for dissolved organic carbon (DOC) respiration and methane oxidation. Parameters for microbial processes were derived from calibration of the REX in situ experiment carried out at the Asp? underground laboratory. The role of geochemical and microbial processes in consuming DO is evaluated for several scenarios. Numerical results show that both geochemical and microbial processes are relevant for DO consumption. However, the time needed to consume the DO trapped in the bentonite buffer decreases dramatically from several hundreds of years when only geochemical processes are considered to a few weeks when both geochemical reactions and microbially-mediated DOC respiration and methane oxidation are taken into account simultaneously.     

Chemical Constituents of Fugitive Dust

Wind erosion selectively winnows the fine, most chemically concentrated portions of surface soils and results in the inter-regional transport of fugitive dust containing plant nutrients, trace elements and other soil-borne contaminants. We sampled and analyzed surface soils, sediments in transport over eroding fields, and attic dust from a small area of the Southern High Plains of Texas to characterize the physical nature and chemical constituents of these materials and to investigate techniques that would allow relatively rapid, low cost techniques for estimating the chemical constituents of fugitive dust from an eroding field. From chemical analyses of actively eroding sediments, it would appear that Ca is the only chemical species that is enriched more than others during the process of fugitive dust production. We found surface soil sieved to produce a sub-sample with particle diameters in the range of 53–74 μm to be a reasonably good surrogate for fugitive dust very near the source field, that sieved sub-samples with particle diameters <10 μm have a crustal enrichment factor of approximately 6, and that this factor, multiplied by the chemical contents of source soils, may be a reasonable estimator of fugitive PM₁₀ chemistry from the soils of interest. We also found that dust from tractor air cleaners provided a good surrogate for dust entrained by tillage and harvesting operations if the chemical species resulting from engine wear and exhaust were removed from the data set or scaled back to the average of enrichment factors noted for chemical species with no known anthropogenic sources. Chemical analyses of dust samples collected from attics approximately 4 km from the nearest source fields indicated that anthropogenic sources of several environmentally important nutrient and trace element species are much larger contributors, by up to nearly two orders of magnitude, to atmospheric loading and subsequent deposition than fugitive dust from eroding soils.     

Background ozone levels of air entering the west coast of the US and assessment of longer-term changes

An analysis of surface ozone measurements at a west coast site in northern California (Trinidad Head) demonstrates that this location is well situated to sample air entering the west coast of the US from the Pacific Ocean. During the seasonal maximum in the spring, this location regularly observes hourly average ozone mixing ratios 50 ppbv in air that is uninfluenced by the North American continent. Mean daytime values in the spring exceed 40 ppbv. A location in southern California (Channel Islands National Park) demonstrates many of the characteristics during the spring as Trinidad Head in terms of air flow patterns and ozone amounts suggesting that background levels of ozone entering southern California from the Pacific Ocean are similar to those in northern California. Two inland locations (Yreka and Lassen Volcanic National Park) in northern California with surface ozone data records of 20 years or more are more difficult to interpret because of possible influences of local or regional changes. They show differing results for the long-term trend during the spring. The 10-year ozone vertical profile measurements obtained with weekly ozonesondes at Trinidad Head show no significant longer-term change in tropospheric ozone.     

Numerical study on the spontaneous ignition of pressurized hydrogen release through a tube into air

Spontaneous ignition of pressurized hydrogen release through a tube into air is investigated using a modified version of the KIVA-3V CFD code. A mixture-averaged multi-component approach is used for accurate calculation of molecular transport. Autoignition and combustion chemistry is accounted for using a 21 step kinetic scheme. Ultra fine meshes are employed along with the Arbitrary Lagrangia–Eulerian (ALE) method to reduce false numerical diffusion. The study has demonstrated a possible mechanism for spontaneous ignition through molecular diffusion.

In the simulated scenario, the tube provided additional time to achieve a combustible mixture at the hydrogen–air contact surface. When the tube was sufficiently long under certain release pressure, autoignition would initiate inside the tube at the contact surface due to mass and energy exchange between low temperature hydrogen and shock-heated air through molecular diffusion. Following further development of the hydrogen jet downstream, the contact surface became distorted. Turbulence plays an important role for hydrogen/air mixing in the immediate vicinity of this distorted contact surface and led the initial laminar flame to transit into a stable turbulent flame.     

Accelerated transport of (90)Sr following a release of high ionic strength solution in vadose zone sediments

Numerical simulation of cation exchange and mineral precipitation/dissolution reactions using the multiphase reactive geochemical transport code TOUGHREACT has provided important insight into the distribution of (90)Sr among layers of geologic strata in a complex vadose zone at the U. S. Department of Energy's Idaho National Laboratory. During a transfer operation in November 1972, 70.4 m(3) of acidic, high ionic strength liquid containing 15,900 Ci of (90)Sr was released over five days into alluvial gravels 137 m above the Snake River Plain Aquifer. Sampling data from perched water zones 33 m below the release contain very high levels of (90)Sr as do soil samples obtained nearer the point of release. Use of traditional simulation approaches using laboratory-measured constant partitioning coefficients (K(d)) cannot simultaneously explain perched water and soil concentrations. To address the discrepancy, a reactive transport approach was adopted to include competitive cation exchange, dissolution/precipitation of calcite, carbon dioxide gas production and transport, and gibbsite precipitation. Simulation results using this model suggest that some of the (90)Sr could have been transported very rapidly immediately after the release with the acceleration facilitated by competition for cation exchange sites with high sodium concentrations in the released liquid and calcium dissolved from calcite, and to a lesser extent by formation of aqueous complexes with nitrate. Once the leading edge of the liquid assemblage was flushed from the alluvium, the mobility of the remaining (90)Sr decreased significantly in the absence of the competing cations. Calculations indicate that there should be a net increase in calcite, suggesting that (90)Sr could be entrained in the mineral lattice, but insufficient field data exist for confirmation. Sensitivity studies show that the cation exchange selectivity coefficients were the most sensitive individual parameters determining the (90)Sr distribution. However, the most sensitive overall quantity was the total ion exchange capacity which is a function of the moles of exchange sites per volume of pore water, the cation exchange capacity, and the total volume wetted by the infiltrating solution. In contrast, the future mobility of (90)Sr was found to be relatively insensitive to the normal range in the composition of influxing precipitation and anthropogenic waters.     

Modelling assessment of regional groundwater contamination due to historic smelter emissions of heavy metals

Historic emissions from ore smelters typically cause regional soil contamination. We developed a modelling approach to assess the impact of such contamination on groundwater and surface water load, coupling unsaturated zone leaching modelling with 3D groundwater transport modelling. Both historic and predictive modelling were performed, using a mass balance approach for three different catchments in the vicinity of three smelters. The catchments differ in their hydrology and geochemistry. The historic modelling results indicate that leaching to groundwater is spatially very heterogeneous due to variation in soil characteristics, in particular soil pH. In the saturated zone, cadmium is becoming strongly retarded due to strong sorption at neutral pH, even though the reactivity of the sandy sediments is low. A comparison between two datasets (from 1990 to 2002) on shallow groundwater and modelled concentrations provided a useful verification on the level of statistics of "homogeneous areas" (areas with comparable land use, soil type and geohydrological situation) instead of comparison at individual locations. While at individual locations observations and the model varies up to two orders of magnitude, for homogeneous areas, medians and ranges of measured concentrations and the model results are similar. A sensitivity analysis on metal input loads, groundwater composition and sediment geochemistry reveals that the best available information scenario based on the median value of input parameters for the model predicts the range in observed concentrations very well. However, the model results are sensitive to the sediment contents of the reactive components (organic matter, clay minerals and iron oxides). Uncertainty in metal input loads and groundwater chemistry are of lesser importance. Predictive modelling reveals a remarkable difference in geochemical and hydrological controls on subsurface metal transport at catchment-scale. Whether the surface water load will peak within a few decades or continue to increase until after 2050 depends on the dominant land use functions in the areas, their hydrology and geochemical build-up.