应用GEM法对硫酸工业中重金属污染的研究

为查明硫酸工业中主要重金属的危害以及不同制酸工艺产生的危害差异，对辽宁省主要生产硫酸企业进行了调研，并应用ＭＥＧ法，对矿石原料中重金属的含量进行了数学模型分析．     

Effects of atmospheric mercury pollution on terrestrial ecosystem in Chongqing, China

1　ＩｎｔｒｏｄｕｃｔｉｏｎＭｅｒｃｕｒｙ(Ｈｇ)ａｓａｇｌｏｂａｌｐｏｌｌｕｔａｎｔｈａｓｃａｕｓｅｄｃｏｎｃｅｒｎｗｏｒｌｄｗｉｄｅｓｉｎｃｅｔｈｅｅｎｄｏｆ 1980ｓ.Ｉｔｉｓｅｍｉｔｔｅｄｔｏｔｈｅａｔｍｏｓｐｈｅｒｅｆｒｏｍｂｏｔｈａｎｔｈｒｏｐｏｇｅｎｉｃａｎｄｎａｔｕｒａｌｓｏｕｒｃｅｓ.Ｉｍｐｏｒｔａｎｔｓｏｕｒｃｅｏｆｔｈｅｆｏｒｍｅｒｉｓｔｈｅｄｉｓｃｈａｒｇｅｆｒｏｍ ｐｒｏｄｕｃｔｉｏｎａｎｄｕｓｅｏｆＨｇａｓｗｅｌｌａｓｔｈｅｃｏｍｂｕｓｔｉｏｎｏｆｆｏｓｓｉｌｆｕｅｌｓ(Ｎｒｉ…     

温度对氨法脱硫率影响的实验研究

对使用氨（NH3）脱除烟气中气态污染物的技术进行了分析和总结，认为氨洗涤法洗涤净化烟气是一种很有前景的方法，并就温度对SO2脱除率的影响进行了实验研究。实验研究结果显示，当温度超过54℃时，NH3对SO2仍有很高的脱除率。并根据实验结果建议，在实际氨法脱硫工程中，脱硫过程温度宜控制在60℃以下或在80℃以上。     

Relationship between abundance of rodents and damage to agricultural crops

Developing a relationship between pest abundance and damage to crops is essential for the calculation of economic injury levels (EIL) leading to informed management decisions. The crop modelling framework, APSIM, was used to simulate the impact of mouse damage on yield loss on wheat where a long-term dataset on the density of mice was available (1983–2003). The model was calibrated using results from field trials where wheat plants were hand clipped to imitate mouse damage. The grazing effect of mice was estimated using the population density, daily intake per mouse and the proportion of wheat grain and plant tissue in the diet to determine yield loss. The mean yield loss caused by mice was 12.4% (±5.4S.E.; range −0.5 to 96%). There were 7/21 years when yield loss was >5%. A damage/abundance relationship was constructed and a sigmoidal curve explained 97% of variation when accounting for different trajectories of mouse densities from sowing to harvest. The majority of damage occurred around emergence of the crop when mouse densities were >100 mice ha⁻¹. This is the first time that field data on mouse density and a crop simulation model have been combined to estimate yield loss. The model examines the efficacy of baiting and how to estimate EILs. Because the broadscale application of zinc phosphide is cheap and effective, the EIL is very low (<1% yield loss). The APSIM model is highly flexible and could be used for other vertebrate pests in a range of crops or pastures to develop density/damage relationships and to assist with management.     

Laws of annual nutrient uptake in a Paulownia plantation

ＬａｗｓｏｆａｎｎｕａｌｎｕｔｒｉｅｎｔｕｐｔａｋｅｉｎａＰａｕｌｏｗｎｉａｐｌａｎｔａｔｉｏｎ￥ＷｕＧａｎｇ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－ＥｎｖｉｒｏｎｍｅｎｔａｌＳｃｉｅｎｃｅｓ，ＣｈｉｎｅｓｅＡｃａｄｅｍｙｏｆＳｃｉｅｎｃｅｓ，Ｂ...     

鞍山市双岭水泥厂污染状况调查及环境影响防治对策

通过对鞍山市双岭水泥厂污染源及周边环境的调查监测，搞清污染物的主要来源、厂区周边空气环境的质量，并评价了该厂对周边环境的影响。     

袋式除尘器在立窑烟气除尘中的应用

对立窑烟尘排放特点与立窑除尘工艺中的问题及对策进行了讨论。分析了立窑烟尘排放特征,对几种常见的立窑除尘的设备和工艺进行了比较,指出袋式除尘器可成功地用于立窑烟气除尘。并且从滤料选择、清灰方式、烟温控制、灰斗的气密性等方面详细地完善了袋式除尘器在立窑烟气除尘中的应用。     

清洁生产及其在瑞丽糖厂的实践

瑞丽糖厂从吸滤，发酵，酒精废醪液利用等方面实施清洁生产方案，从源头控制和减少污染物的产生，日排废水减少21792m^2,CODCr消减率达到85．9％，污染得到了有效控制。     

半球形件粘性介质压力成形的数值模拟研究

粘性压力成形技术是金属板材成形领域里新近出现的一种先进的加工工艺。对双面施放粘性介质的板材胀形进行了模拟研究 ,在双面施放介质的板材粘性介质胀形时 ,排放孔位置分布对毛坯成形过程有明显的影响。排放孔位置分布的不同造成模腔内介质的速度场不同 ,进而导致板材不同部位的流动速度的方向大小发生变化 ,最终使成形件的厚度分布不同     

曲霉对水中重金属的吸附去除

利用2种曲霉A.sojae M146和A.oryzae M149的菌体，作为吸附剂对水中Pb^2＋和Cd^2 进行去除实验。结果表明，曲霉菌体的最佳培养时间为72h，吸附的最佳pH为5．5、温度为30℃、时间为1h。在最佳实验条件下，A.sojae M146对Pb^2 和Cd^2 的吸附率，分别为69．76％和72．28％；A.oryzae M149对Pb^2 和Cd^2 的吸附率，分别为60．64％和81．34％。使用稀碱溶液对曲霉菌体进行浸泡预处理后，可提高对重金属的吸附去除效果；而使用稀释、乙醇水溶液以及蒸馏水对菌体浸泡后，明显降低了重金属的去除效果。Na2CO3和EDTA溶液，可以有效地将重金属从曲霉体上解吸下来，从而达到重复利用菌体作为吸附剂的目的。