粒子电极堆放方式对三维电极体系性能的影响研究

通过对自制的粒子电极串进行实验,探讨了一种消除三维电极反应床中短路电流的新方法,并研究了不同粒子堆放方式对电催化效果的影响.结果表明,粒子本身长度的适当增长,使其与溶液电位差增大,废水脱色率也随之增大.采用B-β型粒子电极串在20V电压下反应60min,14mm长的粒子电极对直接湖蓝5B废水的脱色率可达到71.4%,比...     

可渗透反应复合电极法对土壤重金属的电动去除

将零价铁(Fe0)、沸石等活性材料附着在电极上形成可渗透反应层并构成可渗透反应复合电极,采用不同的复合电极对Cd2+、Ni 2+、Pb2+和Cu2+等4种阳离子型重金属污染土壤进行了电动力学修复。研究了不同可渗透反应复合电极对土壤pH的控制效果以及对重金属的去除作用,分析了迁移到复合电极中的重金属形态变化。结果表明,复合电极中添加酸、碱性沸石并适时更换,可有效中和、截留阴阳极电解产生的OH-和H+,避免或减缓土壤酸碱迁移带的形成,防止重金属离子的过早沉淀及土壤过度酸化,极大提高了重金属的去除率。复合电极中Fe0可将迁移进来的重金属离子进行还原稳定,实现重金属污染物的捕获与固定,与迁移到沸石复合电极中的4种重金属不稳定态相比,"Fe0+沸石"复合电极中重金属不稳定态分别下降了61.4、60.5、61.4、57.1百分点。结果还显示,阴极采用"Fe0+沸石"复合电极并适时进行更换,施加1.5V/cm的直流电压修复10d后,土壤中Cd、Ni、Pb、Cu的总去除率分别为44.5%、41.5%、33.5%和36.7%,且进一步延长修复时间和持续更换电极可获得更为理想的修复效果。     

HDTMA改性蒙脱土对苯酚的吸附及机理研究

利用十六烷基三甲基溴化铵(HDTMA)改性蒙脱土处理含酚废水．了解不同改性量有机蒙脱土吸附苯酚的能力。结果表明．改性蒙脱土按照分配机理吸附苯酚．改性蒙脱土改性量高和水溶液中苯酚浓度高．其吸跗的苯酚数量大。1．0CEC(阳离子交换容量)改性蒙脱土对水溶液中苯酚去除率达到76％。改性蒙脱土中有机物对苯酚的吸附存在协同作用．因此．改性蒙脱土吸附苯酚的增加速率要超过其中HDTMA增加的速率。在试验的苯酚浓度下．改性蒙脱土对苯酚吸附符合Freundlich吸附模式．不符合Langmuir吸附模式。     

Synthesis of highly effective absorbents with waste quenching blast furnace slag to remove Methyl Orange from aqueous solution

Water quenching blast furnace slag(WQBFS) is widely produced in the blast furnace iron making process. It is mainly composed of CaO, MgO, Al_2O_3, and SiO_2 with low contents of other metal elements such as Fe, Mn, Ti, K and Na. In this study, WQBFS was treated with grinding, hydrochloric acid acidification, filtration, filtrate extraction by alkali liquor and a hydration reaction. Then BFS micropowder(BFSMP), BFS acidified solid(BFSAS) and BFS acid-alkali precipitate(BFSAP) were obtained, which were characterized by X-ray diffraction, scanning electron microscopy, X-ray fluorescence and Brunauer-Emmet-Teller(BET)specific surface area. The decoloration efficiency for Methyl Orange(MO) was used to evaluate the adsorptive ability of the three absorbents. The effects of adsorptive reaction conditions(p H and temperature of solution, reaction time, sorbent dosage and initial concentration) on MO removal were also investigated in detail. The results indicated that BFSAP performed better in MO removal than the other two absorbents. When the p H value of MO solutions was in the range 3.0–13.0, the degradation efficiency of a solution with initial MO concentration of 25 mg/L reached 99.97% for a reaction time of 25 min at 25°C.The maximum adsorption capacity of BFSAP for MO was 167 mg/g. Based on optimized experiments, the results conformed with the Langmuir adsorption isotherm and pseudo-second-order kinetics. Among inorganic anions, SO_4~(2-)and PO_4~(3-)had significant inhibitory effects on MO removal in BFSAP treatment due to ion-exchange adsorption.     

A screen-printed, amperometric biosensor for the determination of organophosphorus pesticides in water samples

An amperometric biosensor based on screen-printed electrodes (SPEs) was developed for the determination of organophosphorus pesticides in water samples. The extent of acetylcholinesterase (AChE) deactivation was determined and quantified for pesticide concentrations in water samples. An enzyme immobilization adsorption procedure and polyacrylamide gel matrix polymerization were used for fabrication of the biosensor, with minimal losses in enzyme activity. The optimal conditions for enzyme catalytic reaction on the SPEs surfaces were acetylthiocholine chloride (ATChCl) concentration of 5 mmol/L, pH 7 and reaction time of 4 min. The detection limits for three organophosphorus pesticides (dichlorvos, monocrotophs and parathion) were in the range of 4 to 7 g/L when an AChE amount of 0.1 U was used for immobilization.     

改性TiO2对X-3B的光催化性能及其降解动力学研究

以活性艳红X-3B为模型化合物,比较了改性前后TiO2光催化活性的变化.试验结果表明,通过改性大大提高了TiO2的光催化活性,Fe3+和Ag+的掺杂量均有一个最佳值,在试验的掺杂范围内Fe3+和Ag+的最佳掺杂量分别是0.1%和0.05%.对其宏观降解反应动力学的研究表明,X-3B在TiO2、Fe3++TiO2和Ag++TiO2 3种催化剂上的光催化降解动力学均能很好地符合Langmiur-Hinshelwood动力学模型.其表观反应速率常数的大小顺序依次是Ag++TiO2＞Fe3++TiO2＞TiO2;吸附平衡常数则是Fe3++TiO2和Ag++TiO2两者基本相等,两者均比纯TiO2大2～3倍.     

Involving local farmers in rehabilitation of degraded tropical forests: some lessons from Ghana

The role of community-based plantation development in forest rehabilitation and poverty alleviation is a pressing issue for the government of Ghana. In this paper, we present an analysis of the prospects of a community-based plantation using taungya systems and indigenous trees as means to forest rehabilitation and livelihood improvement in Ghana. The project management strategies, communication process and incentive mechanism and their impact on local participation are discussed with the aim to recommending a mechanism through which local farmers can best be involved in rehabilitation of degraded sites in the future in Ghana. Data were collected through a survey using personal interviews of 431 farming households and ten key informants from ten communities living in scattered hamlets in and around forests reserves. The results show a high rate of local participation in project tree planting activities. Four years after the project’s initiation, about 250 ha of plantations had been established using twelve priority indigenous and one exotic species and farmers had indicated improvement in their farming practices and availability of food and forest products. Restoring forest quality as a timber resource and associated values, getting money, food stuff and timber and non-timber for domestic use, and having access to fertile land for farming were the top three issues prioritised by respondents as motivational factors for engaging in the project activities. Overall, this project demonstrates that reversing tropical forest degradation is possible. For this we need local involvement in tree domestication combined with activities that addresses livelihood needs and environmental concerns. This case also demonstrates the prospects of utilising indigenous tree species, not only exotic species that dominated tree planting in the past, for plantations and landscape rehabilitation in Ghana. Readers should send their comments on this paper to BhaskarNath@aol.com within 3 months of publication of this issue.     

改性聚合硫酸铁的絮凝特性及其应用

本文较详细地介绍了改性聚合硫酸铁的絮凝机理、净水性能、质量指标、应用范畴及其注意事项,并使用珠江水对几种主要的无机高分子絮凝剂进行了性能测试,结果表明,改性聚合硫酸铁的生产成本最低,净水效果却最显著.     

Fate of trace tetracycline with resistant bacteria and resistance genes in an improved AAO wastewater treatment plant

The fate of trace tetracycline, tetracycline resistant bacteria (TRB) and tetracycline resistant genes (TRGs) in an improved anaerobic-anoxic-oxic (AAO) wastewater treatment plant (WWTP) was investigated in this study. Quantitative real-time polymerase chain reaction (qPCR) and conventional heterotrophic plate count method were used to measure eight tet genes (tetA, tetB, tetC, tetE, tetM, tetO, tetS and tetX) and TRB, respectively. The TRB percent of total heterotrophic bacteria (THB) is about 1.31–24.1% in WWTP influent. Tet gene abundance in the WWTP varied greatly among the gene types. The concentrations of TRGs in effluent samples ranged from 7.11 × 10⁻⁹ to 1.53 × 10⁻⁴ copies/copy 16S rRNA gene. TRB and THB, tetM and tetO, tetE and tetX, but not the others, showed a significant correlation with each other (p < 0.01). The relationships between ribosomal protection protein genes, enzymatic modification gene and corresponding concentrations of antibiotics were found to be considerably significant (R² = 0.898, p < 0.01 for ribosomal protection protein genes and R² = 0.872, p < 0.05 for enzymatic modification gene).     

Microbial fuel cell with three-dimensional electrodes for domestic wastewater treatment and electricity generation北大核心CSCD

A single chamber microbial fuel cell (MFC) with three-dimensional electrodes packed bed carbon felts was developed to treat domestic wastewater while simultaneously generating electricity. The influence of batch and continuous operation mode on treatment effectiveness and electricity production of the MFC was investigated to provide a reference for the application of the MFC. The MFC with a total working volume of 1 440 mL was operated in the fed-batch mode for 5 d repeatedly three times, and then shifted to the continuous mode. During the testing of the continuous mode, wastewater was continuously pumped into the anode compartment at a flow rate of approximately 0.2 mL/min, resulting in a hydraulic retention time of 5 d. During the batch test, the MFC obtained 91.1% chemical oxygen demand (COD) and 98.2% NH4 +-N removal, which accorded with the first criteria specified in the discharge standard of pollutants for municipal wastewater treatment plants in China (GB18918-2002). A maximum power density of 27.88 mW/m3 was achieved at a 51 Ω external resistor. During the continuous test, the COD removal efficiencies ranged from 83.2% to 97.4%. The concentration of NH4 +-N gradually decreased within 5 d and was then maintained below 9.45 mg/L, thus an enhanced removal performance of NH4 +-N was acquired. However, a low removal efficiency of total nitrogen was observed owing to the accumulation of NO3 --N in the effluent since day 11. Additionally, the MFC continually generated electricity with a maximum power density of 582.5 mW/m3 and average output voltage of 0.087 7 V during the stable period in the continuous operation mode. Moreover, 16S rRNA gene high-throughput sequencing showed that Thauera sp., Saprospiraceae-UN sp., and OPB56-UN sp. were identified as dominant populations. The results suggested that the organic matter associated with power generation was constantly utilized by the microorganisms in the reactor, which caused an excellent electricity generation performance during the continuous test. Therefore, the continuous operation mode could improve the low output voltage phenomenon in the MFC. Thauera sp., as a type of nitrate-reducing bacteria, was enriched in the autotrophic denitrifying microbial communities; therefore, bio-enrichment with denitrifying bacteria such as Thauera sp. could decrease the concentration of NO3 --N in the effluent during the continuous operation mode, which is expected to be an innovation for improvement of wastewater treatment. © 2018 Science Press. All rights reserved.