中国农业植被净初级生产力模拟(I)——模型的建立与灵敏度分析

以业已建成的稻麦作物净初级生产力模型为基本框架,建立了一个具有普适性的中国农业植被净初级生产力模型(CropC-)。CropC-的模拟对象为占我国农作物总播种面积2/3的水稻、小麦、玉米、棉花、油菜和大豆。该模型包括2个主要功能模块:光合作用和呼吸作用;土壤-作物系统氮素运移。前者综合考虑了环境因子和氮素的影响,后者包括了作物氮素吸收、土壤氮矿化和化肥氮释放。灵敏度分析表明,在输入参数变化±10%时,CropC-对6个主要输入参数响应的敏感性依次为温度>光合有效辐射>大气CO2浓度>土壤全氮含量>施氮量>降水。模型分析表明,气候变暖将降低作物净初级生产力。     

Experimental study on the synergistic inhibition effect of nitrogen and ultrafine water mist on gas explosion in a vented duct

In this study, in order to research the synergistic inhibition effect of nitrogen and ultrafine water mist on gas explosion in a vented duct, a semi-confined transparent chamber was designed with the size of 120 × 120 × 840 mm, and the experiments were carried out with stoichiometric methane/air premixed mixture (fraction of methane: 9.5%), adding different fractions of nitrogen and ultrafine water mist. The experimental results showed the following: The combination of nitrogen and ultrafine water mist had a synergistic inhibiting effect on methane/air explosion, which was preferable to the single use of any kind. With the increase of spraying time of water mist and fraction of nitrogen, the initial shape of the explosion flame became snakelike, and at the same time the peak flame propagation speed and peak overpressure decreased significantly. When the nitrogen fraction was increased to 10% and the mist spraying time was increased to 2min, synergistic inhibiting effect on overpressure was high efficient. However, with the increase of spraying time of water mist and fraction of nitrogen going on, the amount of increase of explosion inhibition efficiency was gradually reduced.     

Nitrogen evolution during the co-combustion of hydrothermally treated municipal solid waste and coal in a bubbling fluidized bed

Nitrogen evolution was studied during the co-combustion of hydrothermally treated municipal solid wastes (HT MSW) and coal in a bubbling fluidized bed (BFB). HT MSW blending ratios as 10%, 20% and 30% (wt.%) were selected and tested at 700, 800, 900 °C. Emissions of NO and N₂O from blends were measured and compared with the results of mono-combustion trials. Moreover, concentrations of precursors like NH₃ and HCN were also quantified. The results are summarized as follows: NO emissions were predominant in all the cases, which rose with increasing temperature. The blending of HT MSW contributed to the NO reduction. N₂O emissions decreased with temperature rising and the blending of HT MSW also presented positive effects. At 30% HT MSW addition, both NO and N₂O emissions showed the lowest values (391.85 ppm and 55.33 ppm, respectively at 900 °C). For the precursors, more HCN was detected than NH₃ and both played important roles on the gas side nitrogen evolution.     

Full-scale blending treatment of fresh MSWI leachate with municipal wastewater in a wastewater treatment plant

Fresh leachate, generated in municipal solid waste incineration (MSWI) plants, contains various pollutants with extremely high strength organics, which usually requires expensive and complex treatment processes. This study investigated the feasibility of blending treatment of MSWI leachate with municipal wastewater. Fresh MSWI leachate was pretreated by coagulation–flocculation with FeCl₃ 2 g/L and CaO 25 g/L, plate-and-frame filter press, followed by ammonia stripping at pH above 12. After that, blending treatment was carried out in a full-scale municipal wastewater treatment plant (WWTP) for approximately 3 months. Different operational modes consisting of different pretreated leachate and methanol addition levels were tested, and their performances were evaluated. Results showed that throughout the experimental period, monitored parameters in the WWTP effluent, including COD (<60 mg/L), BOD₅ (<20 mg/L), ammonium (<8 mg/L), phosphorus (<1.5 mg/L) and heavy metals, generally complied with the Chinese sewage discharged standard. Under the experimental conditions, a certain amount of methanol was needed to fulfill TN removal. An estimation of the operation cost revealed that the expenditure of blending treatment was much lower than the total costs of respective treatment of MSWI leachate and municipal wastewater. The outcomes indicated that blending treatment could not only improve the treatability of the MSWI leachate, but also reduce the treatment cost of the two different wastewaters.     

Nitrogen fixation estimates for the Baltic Sea indicate high rates for the previously overlooked Bothnian Sea

Dense blooms of diazotrophic filamentous cyanobacteria are formed every summer in the Baltic Sea. We estimated their contribution to nitrogen fixation by combining two decades of cyanobacterial biovolume monitoring data with recently measured genera-specific nitrogen fixation rates. In the Bothnian Sea, estimated nitrogen fixation rates were 80 kt N year⁻¹, which has doubled during recent decades and now exceeds external loading from rivers and atmospheric deposition of 69 kt year⁻¹. The estimated contribution to the Baltic Proper was 399 kt N year⁻¹, which agrees well with previous estimates using other approaches and is greater than the external input of 374 kt N year⁻¹. Our approach can potentially be applied to continuously estimate nitrogen loads via nitrogen fixation. Those estimates are crucial for ecosystem adaptive management since internal nitrogen loading may counteract the positive effects of decreased external nutrient loading.     

人造沸石负载纳米氧化镁同步脱氮除磷的研究

氮、磷是引发水体富营养化的限制性因素,控制水体中的氮、磷总量可以有效抑制水体富营养化的产生。以人造沸石为研究对象,探究不同改性方法对人造沸石同步去除水中氮、磷的影响。主要工艺为高温碱(NaOH)浸改善沸石结构,高温盐浸(MgCl)负载纳米态氧化镁。结果表明改性的最佳条件为:两阶段的烘干温度45℃;NaOH溶2+3-液浓度0.5 mol/L;MgCl溶液的浓度1 mol/L。对NH-N和PO的去除效率分别可达到83.76%和74.24%。对人造沸石2 4 4的热稳定性进行了实验,其烧失量达40.6%。最后,对吸附饱和的人造沸石进行脱附实验,脱附剂的选择为NaCl、KCl以及+3-两者的混合液。NaCl对NH4+-N和PO43-都有较为明显的脱附效果,脱附率分别可达84.54%和59.35%。     

厌氧氨氧化工艺脱氮及其污泥形态的研究

为研究厌氧氨氧化工艺对高浓度含氮废水的脱氮性能,在以聚乙烯海绵作为填料的上流式厌氧固定床反应器中利用人工配置高浓度含氮废水进行了实验研究.实验中通过添加充足无机碳源,实现了厌氧氨氧化反应器在总氮浓度900～1 210 mg/L长期稳定的运行,脱氮效率在80％以上,最高氮负荷为5.9 kg/m3·d.结果表明:充足的无机碳源在一定程度上可有效地降低高浓度亚硝氮对厌氧氨氧化菌的抑制作用.通过对污泥性状的研究,明确寻找出污泥上浮的原因所在.通过Stover-Kincannon模型确定系统动力学参数KB和Umax分别为30.2 g/L·d和2L2g/L·d,这将有助于对该厌氧氨氧化系统各控制条件的有效调节和准确设定,也为日后应用于实际工程中提供重要的理论依据.     

几种牺牲阳极在干湿交替条件下的自放电行为比较

模拟海水与空气的干湿交替条件,对四种海船常用牺牲阳极的自放电行为进行了研究。通过测定工作电位、发生电流、溶解性能、溶解产物成分,分析了四种牺牲阳极在经历不同间浸工作周期后的电化学性能,特别是再活化性能。结果表明:在干湿交替条件下,Zn-Al-Cd阳极的电化学性能降低幅度最大,Al-Zn-In-Cd阳极次之,它们均不适合在此环境中使用;Al-Zn-In-Mg-Ti的电化学性能比前两者好,Al-Zn-In-Mg-Ga-Mn则最适合作为干湿交替环境中的牺牲阳极。     

低碳高氮污水处理应用技术研究

针对碳氮比小于7的污水,其碳源不能满足硝化与反硝化的要求这一问题,通过改变SBR工艺的运行方式、调解工艺参数等技术手段,使其能够达标处理此类工业废水,并通过某淀粉厂的工程实例进行了验证:采用改良的SBR工艺可以对低碳高氮污水进行有效的处理。     

锌离子对厌氧氨氧化脱氮效能的影响

通过序批实验的方法,直接接种厌氧氨氧污泥,研究了Zn2＋对厌氧氨氧化（Anammox）脱氮效能的影响。研究结果表明,当进水Zn2＋质量浓度小于2 mg/L时,对厌氧氨氧化生物活性有促进作用,可增强微生物的脱氮效能;当进水Zn2＋质量浓度在2 mg/L和4 mg/L之间时,脱氮效能无明显变化,说明对厌氧氨氧化微生物活性无明显影响;当进水Zn2＋质量浓度大于4 mg/L,对厌氧氨氧化反应有抑制作用,Zn2＋浓度越高,抑制作用越明显。 Zn2＋对厌氧氨氧化的半抑制质量浓度（CI,50）为32.3 mg/L,NO2--N与NH4＋-N转化比的平均值为1.28。