Numerical study on dust movement and dust distribution for hybrid ventilation system in a laneway of coal mine

Coal dust disaster is the most serious problem in a laneway of coal mine. Dust movement regularity for comprehensive mechanized heading face is the key scientific issues for the principle and technology of dust prevention. The special topic on systematic study of the variation regularity of dust movement and dust distribution is presented with hybrid ventilation for the comprehensive mechanized heading face: Euler–Euler method was firstly established on the numerical platform for gas–solid two phase flow in a laneway. And the forces and the dynamic model of dust particles were performed in three-dimensional flow field. Then based on the visible simulations, the movement characteristics of diffusion, sedimentation and accumulation of dust particles were investigated under the action of the complex air flow, and the spatiotemporal variation of dust distribution was studied with hybrid ventilation system. Meanwhile, the obtained dust distribution regularities were compared with the obtainable experimental results. Finally, selected method on different ventilation patterns for dust control was brought out for the heading face according to the gained regularity. The research results is helpful for further understanding of the essence of dust movement with air flow, which could provide more suitable guidance for the principle of dust control and technology of ventilation.     

Numerical simulation of evaporation of volatile liquids

The paper presents the results of the validation of the developed pool evaporation model using literature and our own experimental data. The proposed model was used to examine the effect of wind velocity and pool sizes on the evaporation rate of volatile liquid (hexane). Contrary to the semi-empirical evaporation model widely used in hazard assessment, stronger dependence of evaporation rate on pool size at low wind speeds is obtained.     

建筑火灾过渡区域数值模拟选取计算区域的判据研究

在建筑火灾的计算机模拟中,计算区域的选取密切关系到计算结果的合理性。已有研究针对单一开口小室在火灾燃料控制阶段和通风控制阶段时计算区域如何选取进行了分析并得到了定量的结论,该文在此基础上改进结果处理的方法,提出一种新的定量分析计算区域合理选取的方法,对单一开口小室在火灾两阶段间的过渡区域如何选取计算区域进行了定量分析。     

Modelling feeding flow related shrinkage defects in aluminum castings

The process modelling of shape casting is geometrically complex and computationally very challenging. Besides the three-dimensional complex shapes with multiple domains, the defects of interest to industry arise as a consequence of the interaction amongst a range of phenomena. Conventionally, the key phenomena and defect prediction are modelled through empirical relations applied to the simulation results. Such approaches are neither comprehensive nor reliable. This paper presents a 3-D model that is capable of predicting the formation of shrinkage defects explicitly as a function of the interacting continuum phenomena, i.e. free surface flow, heat transfer, and solidification, in complex three-dimensional geometries which allows to identify the distinction between surface depression, surface connected cavities and internal cavities.The model solves the coupled macroscopic conservation equations for mass, momentum, and energy with a phase change during solidification. In the model, the volume deficit due to solidification can either be compensated by depression of the outside surface or by creating a cavity that initiates either on the surface or in the interior of the casting. The solidification morphology is taken into account by using a parameter, which depends on the fraction solid, in the momentum equation. By using an adapted free surface algorithm, it is suitable to predict surface connected defects: depressed surfaces and caved surfaces. A critical pressure serves as a criterion to open internal shrinkage cavities. The model does not need to search for connected zones to feed shrinkage, but the shrinkage distribution will automatically emerge from the continuity equation.This advanced shrinkage model has experimentally been validated successfully using two Al-Si alloys, a skin freezing eutectic alloy and a mushy freezing hypo-eutectic alloy.     

火灾现象的数值模拟及其应用

本文讨论了模拟火灾现象的数值方法及其应用。着重研究了火焰发热、空气流动和烟尘传播的数学模型，讨论了紊流模型中浮力项的处理和边界条件的简化，并介绍了这一课题的研究现状和发展方向。     

用于风险评估的二维爆炸场的数值模拟

采用多流体Ｕｕｌｅｒ型方法，对爆轰产物采用可变指数的多方气体状态方程，给出了对二维爆炸场进行模拟的方法，该法可为用压力一冲量准则对可能发生的爆炸事故进行风险评估提供基础。数值计算结果表明，该法适合于各种不同的几何外型，与现有实验结果符合较好。     

含瓦斯煤岩突出过程数值模拟

含瓦斯煤岩突出是煤炭开采过程中一种复杂的工程诱发灾害。根据煤岩体变形与瓦斯渗流的基本理论 ,考虑煤岩介质材料力学性质的非均匀性特点以及煤岩介质变形破裂过程中透气性的非线性变化特性 ,建立了含瓦斯煤岩突出过程固气耦合作用的RFPA2D Flow模型。利用该模型对石门掘进诱发的含瓦斯煤岩突出进行了初步的数值模拟 ,模拟结果再现了煤岩介质在瓦斯压力、地应力和煤岩力学性质等因素综合作用下由裂纹萌生、扩展、相互作用、贯通直至失稳抛出的突出全过程 ,揭示了采动影响下煤岩介质渐进破坏诱致突变的非线性本质 ,包括含瓦斯煤岩破裂过程中应力场的演化 ,为含瓦斯煤岩突出机理研究提供一套全新的数值试验分析工具。     

关于地铁轴流风机叶片发生断裂和出现裂纹的分析

叶片断裂和裂纹是旋转机械中普遍存在的一种安全隐患。对其发生规律进行分析是十分重要的。笔者针对地铁通风系统的某型号 18#轴流式风机发生断裂和出现裂纹的情况 ,采用Star—CD流体计算软件和ANSYS有限元软件计算了有、无软连接两种情况下的风机内流场和风机叶片的内应力。结果表明 ,软连接结构虽然对风机的内流场和叶片内应力有影响 ,但不足以对风机安全运行构成威胁。同时 ,分析了导致叶片断裂和出现裂纹的多种因素 ,并提出了避免类似现象发生的若干建议。     

建筑火灾场模拟计算中的求解区域的确定——建筑防火性能化设计的若干问题探讨

建筑火灾的计算机模拟是建筑防火性能化设计的重要组成部分,场模拟是建筑火灾计算机模拟的主要方法之一。在建筑火灾计算机模拟过程中求解区域的取法将直接影响计算结果的合理性,求解区域的选择涉及边界条件的处理,本文通过对求解区域选取的举例说明和探讨,以求科学地认识和理解其在火灾计算机模拟过程中的重要性。     

无消防水池的变电站火灾工况数值模拟研究

当前,建于市区的变电站为了节约用地,其消防系统通常不建设消防水池,消防用水直接从市政管网取水,该消防模式下的取水安全及管网响应情况值得关注.论文以某城市中心城区为例,采用EPANET 2.0构建了供水管网模型,针对供水高峰、流量转输和事故爆管3种不利供水条件,开展了无消防水池变电站的消防系统5种不同火灾工况的水力计算与...