AnSBBR applied to the treatment of wastewater from a personal care industry: Effect of organic load and fill time

The objective of this work was to study the technological feasibility of treating wastewater from a personal care industry (PCI-WW) in a mechanically stirred anaerobic sequencing batch biofilm reactor (AnSBBR) containing immobilized biomass on polyurethane foam. An assessment was made on how system efficiency and stability would be affected by: increasing organic load; supplementation of nutrients and alkalinity; and different feed strategies. The AnSBBR operated with 8-h cycles, stirring speed of 400 rpm, temperature of 30 °C, and treated with 2.0 L wastewater per cycle. First the efficiency and stability of the AnSBBR were studied when submitted to an organic loading rate (OLR) of 3.1–9.4 gCOD/(L d), and when the PCI-WW was supplemented with nutrients (sucrose, urea, trace metals) and alkalinity. The AnSBBR was shown to be robust and presented stability and removal efficiency exceeding 90%. At an OLR of 12.0 gCOD/(L d) efficiency became difficult to maintain due to the presence of commercial cleansers and disinfectants in the wastewater lots. In a subsequent stage the AnSBBR treated the wastewater supplemented with alkalinity, but with no nutrients at varying feed strategies and maintaining an OLR of approximately 9.0 gCOD/(L d). The first strategy consists of feeding 2.0 L of the influent batchwise [OLR of 9.4 gCOD/(L d)]. In the second 1.0 L of influent was fed-batchwise and an additional 1.0 L was fed fed-batchwise [OLR of 9.2 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was maintained but supplied in different periods. In the third strategy 1.0 L of treated effluent was maintained in the reactor and 1.0 L of influent was fed fed-batchwise [OLR of 9.0 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was different but the feed period was the same and the OLR was maintained by increasing the influent concentration. Comparison of the first and second strategies revealed that organic matter removal efficiency was unaffected (exceeding 90%). The third strategy resulted in a reduction in average removal efficiency from 91 to 83% when compared to the first one. A kinetic study resulted in first order kinetic parameters ranges from 0.42 to 1.46 h⁻¹ at OLRs from 3.1 to 12.0 gCOD/(L d), respectively, and the second feed strategy [OLR of 9.2 gCOD/(L d)] was shown to be the most favorable.     

An operational method for the evaluation of resource use and environmental impacts of dairy farms by life cycle assessment

This paper describes and applies EDEN-E, an operational method for the environmental evaluation of dairy farms based on the life cycle assessment (LCA) conceptual framework. EDEN-E requires a modest amount of data readily available on-farm, and thus can be used to assess a large number of farms at a reasonable cost. EDEN-E estimates farm resource use and pollutant emissions mostly at the farm scale, based on-farm-gate balances, amongst others. Resource use and emissions are interpreted in terms of potential impacts: eutrophication, acidification, climate change, terrestrial toxicity, non-renewable energy use and land occupation. The method distinguishes for each total impact a direct component (impacts on the farm site) and an indirect component (impacts associated with production and supply of inputs used). A group of 47 dairy farms (41 conventional and six organic) was evaluated. Expressed per 1000 kg of fat-and-protein-corrected milk, total land occupation was significantly larger for organic than for conventional farms, while total impacts for eutrophication, acidification, climate change, terrestrial toxicity, and non-renewable energy use were not significantly different for the two production modes. When expressed per ha of land occupied all total impacts were significantly larger for conventional than organic farms. This study largely confirms previously published findings concerning the effect of production mode on impacts of dairy farms. However, it strikingly reveals that, for the set of farms examined, the contribution of production mode to overall inter-farm variability of impacts was minor relative to inter-farm variability within each of the two production modes examined. The mapping of impact variability through EDEN-E opens promising perspectives to move towards sustainable farming systems by identifying the structural and management characteristics of the farms presenting the lowest impacts.     

The life cycle of rice: LCA of alternative agri-food chain management systems in Vercelli (Italy)

The Vercelli rice district in northern Italy plays a key role in the agri-food industry in a country which accounts for more than 50% of the EU rice production and exports roughly 70%. However, although wealth and jobs are created, the sector is said to be responsible for environmental impacts that are increasingly being perceived as topical. As a complex and comprehensive environmental evaluation is necessary to understand and manage the environmental impact of the agri-food chain, the Life Cycle Assessment (LCA) methodology has been applied to the rice production system: from the paddy field to the supermarket. The LCA has pointed out the magnitude of impact per kg of delivered white milled rice: a CO_2eq emission of 2.9 kg, a primary energy consumption of 17.8 MJ and the use of 4.9 m³ of water for irrigation purposes. Improvement scenarios have been analysed considering alternative rice farming and food processing methods, such as organic and upland farming, as well as parboiling. The research has shown that organic and upland farming have the potential to decrease the impact per unit of cultivated area. However, due to the lower grain yields, the environmental benefits per kg of the final products are greatly reduced in the case of upland rice production and almost cancelled for organic rice. LCA has proved to be an effective tool for understanding the eco-profile of Italian rice and should be used for transparent and credible communication between suppliers and their customers.     

Atmospheric Volatile Organic Compound Monitoring. Ozone Induced Artefact Formation

Assessment of population exposure to VOC in ambient atmospheres is receiving heightened interest as the adverse health effects of chronic exposure to certain of these compounds are identified. Active (pumped) and passive samplers are the most commonly used devices for this type of monitoring. It has been shown, however, that these devices, along with all other preconcentration techniques, are susceptible to ozone interference. It is demonstrated that this interference occurs even at low ozone concentrations and that it may result in the under-estimation of population exposure. A convenient and effective ozone scrubbing method is identified and successfully applied and validated for both active and passive samplers for a range of VOC.     

Biological Responses to Contrasting Hydrology in Backwaters of Upper Mississippi River Navigation Pool 25

Water level management in Mississippi River Pool 25 differentially influences off-channel habitats in the mid-pool and lower pool. Hydrologic models indicate lower pool off-channel habitats dry with greater frequency and duration compared to similar habitats at mid-pool. We examined the influence of this contrasting hydrology on substrate characteristics, organic matter, macroinvertebrate, and fish communities in off-channel habitats during 2001–2003. Benthic organic matter standing stocks were stable in mid-pool habitats but lower pool values were variable because of annual differences in moist-soil vegetation production. Generally, small-bodied and multivoltine invertebrate taxa had high community biomass and dominated lower pool habitats, whereas longer-lived and large-bodied taxa were more abundant and had higher community biomass in mid-pool habitats having longer hydroperiods. Fish communities were dominated by cyprinids in both habitats, and mid-pool habitats tended to be higher in overall species richness. Unique fish taxa were collected in each pool, with primarily rheophilic forms in mid-pool habitats and limnophilic forms in lower pool habitats. Results indicate that contrasting hydrology associated with a mid-pool control point directly and indirectly influences biological communities in off-channel habitats. Further, management regimes that promote hydrologic diversity in off-channel habitats may enhance biological diversity at larger spatial and temporal scales.     

城市生活垃圾可生物降解有机质成分的测定

卫生填埋是我国现阶段最主要的城市生活垃圾处理方式,定量分析城市生活垃圾可生物降解有机质成分对于研究填埋垃圾的厌氧降解过程具有重要意义.通过一系列常规化学试验,利用抽提差重法、比色法及灼烧差重法,依次测定了垃圾中含水率,挥发分与灰分,脂肪类,易水解物与半纤维素,腐植酸,难水解物、不水解物与纤维素,木质素与固体残渣等成分,为入场垃圾可生化性评价及降解过程中固相成分变化的动态监测提供了一种简便快速的测定方法.     

Effect of clay minerals on extractability of heavy metals and sewage sludge mineralization in soil

An incubation experiment lasting 111 d was carried out to study the effect of the addition of three clay minerals (Na-bentonite, Ca-bentonite, and zeolite) to soil derived from sewage sludge on water-extractable and exchangeable forms of four heavy metals (Zn, Cd, Cu, and Ni), as well as on soil organic matter mineralization, microbial biomass C and the release of inorganic N. The addition of clay minerals led to a significant decrease in water-extractable and exchangeable forms of heavy metals. The extent of decrease ranged from 14 to 75% for the water-extractable heavy metals and from 12 to 42% for the exchangeable form over the incubation time, as compared with untreated soil. The reduction in extractability of heavy metals was greater due to the addition of Na-bentonite and Ca-bentonite than that due to the addition of zeolite. Addition of clay minerals did not affect any of the following microbiological parameters in the soil: microbial biomass C, organic C (C_org) mineralization, and metabolic quotient (qCO₂), and release of inorganic N during the first 3 weeks of incubation. However, as the incubation period increased, these parameters were significantly increased by the addition of clay minerals, especially by the addition of Na-bentonite and Ca-bentonite. This result is explained by a strong reduction in extractability of heavy metals after the addition of Na-bentonite and Ca-bentonite.     

PARTICULATE ORGANIC MATTER IN THE NORTHERN AND CENTRAL ADRIATIC

The particulate organic matter distribution and its elemental composition in the northern and central Adriatic Sea during different seasonal periods are shown, highlighting the principal processes and factors influencing their distribution and characteristics.

In the low salinity waters the concentrations of particulate carbon, nitrogen and phosphorus were higher and more variable than in the dense waters, mainly due to dilution effects which induce an abundant phytoplankton growth.

Generally in summer the particulate organic matter distribution followed the trophic gradient while in winter resuspension events often became more important. Differences between summer and winter were more evident in the diluted waters and were mainly due to the seasonal heat exchanges and to the fresh water inputs.

Marked differences in C/P ratios were observed in the POM: high ratios in the northern diluted waters and low in the more saline waters and in the central Adriatic.     

PAB在有机废水处理中的应用

综述了光合细菌独特的生理特性和其处理高浓度有机废水的原理,介绍了近年来国内外利用光合细菌处理有机废水的研究成果,并对光合细菌用于废水生物处理的前景及存在的问题进行了评述。     

Carbon materials-catalyzed hydroliquefaction of flame-retardant plastics in organic solvents

Flame-retardant plastics, such as desktop and laptop personal computer bodies, could be completely liquefied by carbon materials-catalyzed hydroliquefaction in tetralin without using H₂ as a hydrogen source. Active carbons with larger surface areas (1450–3450 m²/g) acted as superior catalysts in transferring tetralin hydrogens to plastics. On the other hand, carbon blacks and fullerene-rich soot were less active catalysts. Graphite and mesocarbon microbeads did not show any catalytic effects. Benzene, toluene, and ethylbenzene were obtained as recyclable hydrocarbons; their total amounts varied from 4 wt% to 12 wt% depending on the types of plastics and the carbon materials used. Organic bromides such as polybromodioxins were not contained in the gases and oils of the product. Received: July 19, 2000 / Accepted: September 17, 2000