Kinetics of the sensitized photodegradation of nonylphenol

Nonylphenol (nonyl‐P) belongs to the classification of persistent organic pollutants. In this work we demonstrate that the contaminant suffers photooxygenation when exposed to visible light Eosin‐photosensitized irradiation. The mechanism was identified as a singlet molecular oxygen‐mediated photooxidation. Rate constants for the process, determined by time‐resolved phosphorescence detection of singlet molecular oxygen, are in the range 10⁵‐10⁷ M^‐1 s^‐1, depending on the characteristics of the reaction medium. The photooxidative process is more efficient when performed in highly polar alkaline medium.

The aggregation of nonyl‐P molecules in pure water decreases the rates of sensitized photooxidation of nonyl‐P and also those of polychlorophenolic contaminants, employed as photooxidizable model compounds, when photolyzed in the presence of nonylphenol. These results are discussed in terms of a micellar effect.     

Results of the monitoring program of pesticide residues in organic food of plant origin in Lombardy (Italy)

Organic agriculture, with its restrictions on the use of synthetic chemical inputs, seems to offer a low-residue alternative to conventional methods. In Europe, the Council Regulation n. 2092/91/EEC regulates the production and trade of organic products and foodstuffs; national and regional legislation in Italy gives specific guidance on the surveillance of organic agriculture. However, monitoring of specific chemical residues in organic foodstuffs is part of the regular controls on food, aiming to safeguard consumer's health. Monitoring programs are coordinated at the national level by the Ministry of Health and at local level by Regional authorities. In Lombardy, in accordance with the provisions of the General Directorate of Health of the Region and under the supervision of the 15 Local Health Units, a monitoring program of pesticide residues in food of plant origin is undertaken every year. The International Centre for Pesticides and Health Risk Prevention (ICPS), on behalf of the General Directorate of Health of the Region of Lombardy, has been collecting and elaborating the data resulting from the analysis of food samples, carried out by the local laboratories. During the period 2002–2005, a total of 3508 samples food of plant origin were analyzed for pesticide residues, among which were 266 samples of organic farming products. Commodities were classified into groups (citrus fruits, legumes, vegetables, potatoes, processed products, cereals, and fruit other than citrus) and the outcomes of the analyses were reported by year, origin of the sample and presence/absence of pesticide residues. Results showed that the vast majority of organic farming products were in conformity with the relevant legislation and did not contain detectable pesticide residues. A limited amount of samples had residues at concentration below the Maximum Residue Limit (MRL). Only in one sample the residue level was above the MRL, however it did not pose a concern for public health, as demonstrated by the outcomes of dietary risk assessment. Organic fruits and vegetables can be expected to contain fewer agrochemical residues than conventionally grown alternatives. There is a widespread belief that organic agriculture products are safer and healthier than conventional foods. It is difficult to come to conclusions, but what should be made clear to the consumer is that “organic” does not automatically equal “safe”. In the absence of adequate comparative data, additional studies in this area of research are required.     

Characterization of municipal solid waste temporary storage sites: Risks posed to surrounding areas as a consequence of fire incidents

In this study temporary storage sites of municipal solid waste were characterized based on their potential social, health and environmental impacts as a consequence of spontaneous fires, by employing Boolean as well as weighted-linear-combination approaches in connection with various fuzzy set functions of population density around the storage sites. Sweden was used as the case study and data from 105 storage sites were analysed; of these, 38 were identified to be posing high risk for downwind residing population. Furthermore, during the past 10 years, the fire frequency and the average population residing within a radius of 1, 2, and 3 km were found to be comparatively higher for storage sites owned by private companies than for those owned by municipalities. The study provided first-cut information of poorly sited temporary storage sites and can help in formalizing the comprehensive risk analysis in the future.     

Performance evaluation of a completely stirred anaerobic reactor treating pig manure at a low range of mesophilic conditions

Many Chinese biogas plants run in the lower range of mesophilic conditions. This study evaluated the performance of a completely stirred anaerobic reactor treating pig manure at different temperatures (20, 28 and 38 °C). The start-up phase of the reactor at 20 °C was very long and extremely poor performance was observed with increasing organic loading rate (OLR). At an OLR of 4.3 g ODM L^?1 d^?1, methane production at 28 °C was comparable (3% less) with that at 38 °C, but the risk of acidification was high at 28 °C. At low OLR (1.3 g ODM L^?1 d^?1), the biogas process appeared stable at 28 °C and gave same methane yields as compared to the reactor operating at 38 °C. The estimated sludge yield at 28 °C was 0.065 g VSS g^?1 COD_removed, which was higher than that at 38 °C (0.016 g VSS g^?1 COD_removed).     

Removal of organic pollutants and nutrients from olive mill wastewater by a sand filter

The aim of this work was to examine the performance of a sand filter in treating modern olive mill (OMW) effluents after dilution with domestic wastewater on a one-to-one basis. The experimental pilot consisted of a column of opaque PVC, and the sand filter was filled with 50 cm of sand and 10 cm of gravel in the top and the bottom of the filter. The alimentation (4 cm/day) was done sequentially following a 1 day wet/3 days dry cycle. The OMW effluent was very acidic with a pH of 4.12, and had high concentrations of phenolic compounds (7.2 g/L) and total chemical oxygen demand (65 g/L). The percolation of the diluted OMW through the sand filters caused an increase in pH from 4.84 to 8.25 and a 90% removal of total suspended solids. The sand filter treatment also led to important reductions in organic matter (90% of total COD, 83% of dissolved COD and 92% of phenolic compounds) and nutrients (91% of Kjeldahl-nitrogen, 97% of ammonia-nitrogen, 99% of nitrate-nitrogen and 99% of phosphates). The flow rate became very low indicating clogging of the sand pores after 10 weeks. HPLC analysis of the diluted OMW before and after passage through the sand filter showed an important reduction in the toxic monomeric compounds after the treatment.     

Effects of feeding time and organic loading in an anaerobic sequencing batch biofilm reactor (ASBBR) treating diluted whey

An investigation was carried out on the performance of an anaerobic sequencing batch biofilm reactor (ASBBR) treating diluted cheese whey when submitted to different feed strategies and volumetric organic loads (VOL). Polyurethane foam cubes were used as support for biomass immobilization and stirring was provided by helix impellers. The reactor with a working volume of 3 L treated 2 L of wastewater in 8-h cycles at 500 rpm and 30 degrees C. The organic loads applied were 2, 4, 8 and 12 g COD L(-1) d(-1), obtained by increasing the feed concentration. Alkalinity was supplemented at a ratio of 50% NaHCO(3)/COD. For each organic load applied three feed strategies were tested: (a) batch operation with 8-h cycle; (b) 2-h fed-batch operation followed by 6-h batch; and (c) 4-h fed-batch followed by 4-h batch. The 2-h fed-batch operation followed by 6-h batch presented the best results for the organic loads of 2 and 4 g COD L(-1) d(-1), whereas the 4-h fed-batch operation followed by 4-h batch presented results slightly inferior for the same organic loads and the best results at organic loads of 8 and 12 g COD L(-1) d(-1). The concentration of total volatile acids varied with fill time. For the higher fill times maximum concentrations were obtained at the end of the cycle. Moreover, no significant difference was detected in the maximum concentration of total volatile acids for any of the investigated conditions. However, the maximum values of propionic acid tended to decrease with increasing fill time considering the same organic load. Microbiological analyses revealed the presence of Methanosaeta-like structures and methanogenic hydrogenotrophic-like fluorescent bacilli. No Methanosarcina-like structures were observed in the samples.     

Assessing Potential Removal of Low-Head Dams in Urban Settings: An Example from the Ottawa River,NW Ohio

This is a study of the scientific component of an effort to restore an urban river by removing a low-head dam. The Secor Dam is owned by a local government entity near Toledo, Ohio. The proposed removal of the last structure impeding flow on the Ottawa River has broad appeal, but the owner is concerned about liability issues, particularly potential changes to the flood regime, the presence of contaminated sediments behind the dam, and possible downstream transport of reservoir sediments. Assessing sediment contamination involved sediment sampling and analysis of trace metals and organic contaminants. Forecasting sediment transport involved field methods to determine the volume and textural properties of reservoir and upstream sediment and calculations to determine the fate of reservoir sediments. Forecasting changes in the flood regime involved HEC-RAS hydrological models to determine before and after dam removal flood scenarios using LiDAR data imported into an ArcGIS database. The resulting assessment found potential sediment contamination to be minor, and modeling showed that the removal of the dam would have minimal impacts on sediment transport and flood hazards. Based on the assessment, the removal of the dam has been approved by its owners.     

Distinct roles of pH and organic ligands in the dissolution of goethite by cysteine

Electron shuttles such cysteine play an important role in Fe cycle and its availability in soils,while the roles of pH and organic ligands in this process are poorly understood.Herein,the reductive dissolution process of goethite by cysteine were explored in the presence of organic ligands.Our results showed that cysteine exhibited a strong reactivity towards goethite-a typical iron minerals in paddy soils with a rate constant ranging from 0.01 to0.1 hr-1.However,a large portion of Fe(Ⅱ) appeare...     

Surface protection method for the magnetic core using covalent organic framework shells and its application in As(III) depth removal from acid wastewater

Fe₃O₄-based materials are widely used for magnetic separation from wastewater. However, they often suffer from Fe-leaching behavior under acidic conditions, decreasing their activity and limiting sustainable practical applications. In this study, covalent organic frameworks (COFs) were used as the shell to protect the Fe₃O₄ core, and the Fe₃O₄@COF core-shell composites were synthesized for As(III) removal from acid wastewater. The imine-linked COFs can in situ grow on the surface of the Fe₃O₄ core layer by layer with [COFs/Fe₃O₄]_mol ratio of up to 2:1. The Fe-leaching behavior was weakened over a wide pH range of 1-13. Moreover, such composites keep their magnetic characteristic, making them favorable for nanomaterial separation. As(III) batch adsorption experiments results indicated that, when COFs are used as the shell for the Fe₃O₄ core, a balance between As(III) removal efficiencies and the thickness of the COF shell exists. Higher As(III) removal efficiencies are obtained when the [COFs/Fe₃O₄]_mol ratios were < 1.5:1, but thicker COF shells were not beneficial for As(III) removal. Such composites also exhibited better As(III) removal performances in the pH range of 1–7. Over a wide pH range, the zeta potential of Fe₃O₄@COF core-shell composites becomes more positive, which benefits the capture of negative arsenic ions. In addition, thinner surface COFs were favorable for mass transfer and facilitating the reaction of Fe and As elements. Our study highlights the promise of using COFs in nanomaterial surface protection and achieving As(III) depth removal under acidic conditions.     

多元多相光催化氧化反应器及其对水中2,4-二硝基苯酚有机污染物降解的研究

利用多元多相光催化氧化反应器 ,可更换不同氧化剂、光源、金属氧化物半导体催化膜、电子捕获器 ,进行化学氧化、光氧化、光化学氧化、光催化氧化和光化学催化氧化等 5种类型多种组合试验 ,处理水中难降解有机物效果明显。设备具有持久性、灵活性、捕电性、简易性 ,适用于科研、工程试验中 ,亦可作教学设备