医疗废物焚烧过程脱硫机理和试验

医疗废物中包括含有硫分的橡胶,焚烧时会产生SO2从而污染环境,因此医疗废物在焚烧处理时需要进行脱硫。应用HSC热力学软件计算可知,医疗废物焚烧炉内喷入脱硫剂在燃烧过程脱硫,脱硫效果最好的脱硫剂是CaO,然后是Ca(OH)2,CaCO3。综合各种因素,选用CaCO3做脱硫剂进行焚烧过程脱硫试验。试验结果表明:温度对脱硫有着重要的影响,最佳脱硫温度为830～870℃左右;随着Ca/S摩尔比的增大脱硫率增大,但增加的速度却趋于平缓,所得最佳Ca/S摩尔比为2.5。     

回转窑焚烧炉在医疗废物处理中的应用

在医疗废物焚烧处理中,对于炉型的选择一直是工程设计人员最为关心的问题,也是关系医疗废物的处置是否能够真正达到无害化、减量化、资源化,特别是达到无害化处置目的的核心因素,在此通过西北某市医疗废物焚烧处理工艺设计,共同探讨回转窑焚烧炉在医疗废物焚烧处理中的应用。     

Carrousel氧化沟单个表曝机流态的模型试验和分析比较

对仅安装1个倒伞形表面曝气机(简称表曝机)的Carrousel氧化沟模型进行了水力学测定,通过颗粒动态分析仪(PDA)系统分析流出和流入表曝机一侧的液体流动速度、沉降速度,以及固体含量分布.结果表明,流出表曝机一侧,距表曝机较近的x轴位置流速较大;沉降速度沿y轴有个转折点,位于沟壁与挡板的中间;远离单个表曝机,固体含量逐渐增大.并将单个表曝机的测量结果与氧化沟内安装2个表曝机的流动试验进行比较,发现2个表曝机所产生的流场与单个表曝机产生的流场差别较大,且2个表曝机所产生的流场更稳定.      

系统动力学方法在城市生活垃圾产生系统的应用

准确预测城市生活垃圾产生量是构建与运行生活垃圾管理系统的首要条件. 我国大部分城市生活垃圾的历史统计数据稀缺,传统预测方法往往难以得到要求精度的预测结果. 在系统地分析生活垃圾产生量影响因素及因素间互动关系的基础上,建立了基于VENSIM软件的系统动力学模型,并将该模型应用于深圳市城市生活垃圾产生系统. 结果表明:运用系统动力学方法可以较好地进行城市生活垃圾产生量预测,解决了数据稀缺条件下城市生活垃圾产生量的精确预测问题,为处理处置工艺的选择和规模的确定提供了数据支撑,同时可以在垃圾产生量预测的基础上进行不同政策下系统的行为模拟.      

城市生活垃圾可生物降解有机质成分的测定

卫生填埋是我国现阶段最主要的城市生活垃圾处理方式,定量分析城市生活垃圾可生物降解有机质成分对于研究填埋垃圾的厌氧降解过程具有重要意义.通过一系列常规化学试验,利用抽提差重法、比色法及灼烧差重法,依次测定了垃圾中含水率,挥发分与灰分,脂肪类,易水解物与半纤维素,腐植酸,难水解物、不水解物与纤维素,木质素与固体残渣等成分,为入场垃圾可生化性评价及降解过程中固相成分变化的动态监测提供了一种简便快速的测定方法.     

固相微萃取-气相色谱法测定水中痕量有机氯农药

建立了固相微萃取-气相色谱联用快速测定水中14种痕量有机氯农药的方法,对比研究了浸入式直接固相微萃取与顶空固相微萃取两种方式对不同有机氯农药的富集效率,优化了试验条件.方法线性关系良好,检出限为0.1 ng/L～10 ng/L,定量下限为0.2 ng/L～40 ng/L,RSD＜8%,实际水样的加标回收率为67.0%～133%.     

A Study on The Management of Municipal Residential Solid Waste in China

As the main organic pollutant in municipal living waste , kitchen waste causes secondary pollution in the course of its being gathered and transported to the landfill by mixing with other refuse and by decomposition. This makes pollution prevention more difficult and raises the cost of landfill engineering. However, the amount of solid waste to be treated can be decreased and such pollution burden lessened by disposing of the solid waste in local municipal areas. The program in Beijing also shows that this works well with our situation in China and can accelerate marketization and public participation.     

Effect of clay minerals on extractability of heavy metals and sewage sludge mineralization in soil

An incubation experiment lasting 111 d was carried out to study the effect of the addition of three clay minerals (Na-bentonite, Ca-bentonite, and zeolite) to soil derived from sewage sludge on water-extractable and exchangeable forms of four heavy metals (Zn, Cd, Cu, and Ni), as well as on soil organic matter mineralization, microbial biomass C and the release of inorganic N. The addition of clay minerals led to a significant decrease in water-extractable and exchangeable forms of heavy metals. The extent of decrease ranged from 14 to 75% for the water-extractable heavy metals and from 12 to 42% for the exchangeable form over the incubation time, as compared with untreated soil. The reduction in extractability of heavy metals was greater due to the addition of Na-bentonite and Ca-bentonite than that due to the addition of zeolite. Addition of clay minerals did not affect any of the following microbiological parameters in the soil: microbial biomass C, organic C (C_org) mineralization, and metabolic quotient (qCO₂), and release of inorganic N during the first 3 weeks of incubation. However, as the incubation period increased, these parameters were significantly increased by the addition of clay minerals, especially by the addition of Na-bentonite and Ca-bentonite. This result is explained by a strong reduction in extractability of heavy metals after the addition of Na-bentonite and Ca-bentonite.     

我国垃圾焚烧技术现状及发展预测

本文论述了在我国宏观政策环境下的垃圾焚烧技术的发展现状,并对垃圾焚烧技术的应用发展趋势进行了分析预测。     

Municipal solid waste production and composition in Finland—Changes in the period 1960–2002 and prospects until 2020

Waste reduction was recognised as the main goal of waste management policy in the EU in the 1990s. Although knowledge of past waste generation is essential for effective waste reduction policy there are no comprehensive statistics on the past development of municipal solid waste (MSW) production. MSW management is currently under turmoil in many EU countries as the requirements of the EC landfill directive (1999/31/EC) are set into force. In this study, the production and composition of MSW in Finland between 1960 and 2002 is presented using historical data. The impact of population, affluence and technology on MSW production are analysed using the IPAT equation and three scenarios are constructed until year 2020. The results are compared with national future targets on MSW production. Production of MSW increased in Finland until 1990, declined to year 1997, increased to 2000 and then declined again. The share of organic and plastic waste increased over the study period while the share of paper and cardboard declined. The results suggest that so far national targets on MSW reduction have been set fairly low. Moreover, our scenarios depict a wide range of future MSW production, even though the time horizon is not longer than 15 years into the future. In order to narrow this range, continuous improvement of the statistics of MSW is essential.