BiOCl/TiO_2复合材料的可见光活性及机理研究

采用水热法和溶胶凝胶法制备新型BiOCl/TiO2复合材料并明确了最优的掺杂比例(2%).随后利用X射线衍射(XRD)、紫外可见漫反射(DRS)、透射电镜(TEM)和X射线光电子能谱(XPS)对该材料进行表征.由于禁带宽度较大,纯BiOCl和TiO2的可见光催化性能极差,然而二者复合后,同条件下的苯降解率却大幅提升,可以达到40%以上.经证实,催化剂制备过程中,Bi的状态发生变化,在TiO2导、价带之间插入新的能级,使其禁带宽度变窄,电子可以实现可见光跃迁.     

内循环厌氧反应器流动模型及反应过程模拟

为揭示内循环厌氧反应器放大过程中所出现的规律,本文对反应器中流动模型和反应过程进行了模拟研究,通过对主反应区的停留时间分布的实验研究,确定了主反应区流型可用一平推流与两个并联的全混流进行串联的三参数组合模型进行模拟.在实验范围内,平推流区所占的体积分数约为36%,两个全混流区所占的体积分数分别为53%和11%.结合厌氧反应动力学方程,应用组合模型模拟了实际反应器的状态,并和实验值进行了对比,发现反应器出口处CH_4体积流量最大误差为9.67%,在可允许的范围内.同时,模拟了基质初始COD和温度变化对反应器出口状态的影响.研究表明,与其它模型相比,组合模型计算简洁,同时又有较好的精度,能够满足反应器的设计需要.     

Potential application of high pressure carbon dioxide in treated wastewater and water disinfection: Recent overview and further trends

Recently emerging disadvantages in conventional disinfection have heightened the need for finding a new solution. Developments in the use of high pressure carbon dioxide for food preservation and sterilization have led to a renewed interest in its applicability in wastewater treatment and water disinfection. Pressurized CO₂ is one of the most investigated methods of antibacterial treatment and has been used extensively for decades to inhibit pathogens in dried food and liquid products. This study reviews the literature concerning the utility of CO₂ as a disinfecting agent, and the pathogen inactivation mechanism of CO₂ treatment is evaluated based on all available research. In this paper, it will be argued that the successful application and high effectiveness of CO₂ treatment in liquid foods open a potential opportunity for its use in wastewater treatment and water disinfection. The findings from models with different operating conditions (pressure, temperature, microorganism, water content, media …) suggest that most microorganisms are successfully inhibited under CO₂ treatment. It will also be shown that the bacterial deaths under CO₂ treatment can be explained by many different mechanisms. Moreover, the findings in this study can help to address the recently emerging problems in water disinfection, such as disinfection by-products (resulting from chlorination or ozone treatment).     

Heterogeneous oxidation of SO2 by O3-aged black carbon and its dithiothreitol oxidative potential

Ozone (O₃) is an important atmospheric oxidant. Black carbon (BC) particles released into the atmosphere undergo an aging process via O₃ oxidation. O₃-aged BC particles may change their uptake ability toward trace reducing gases such as SO₂ in the atmosphere, leading to different environmental and health effects. In this paper, the heterogeneous reaction process between O₃-aged BC and SO₂ was explored via in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Combined with ion chromatography (IC), DRIFTS was used to qualitatively and quantitatively analyze the sulfate product. The results showed that O₃-aged BC had stronger SO₂ oxidation ability than fresh BC, and the reactive species/sites generated on the surface had an important role in the oxidation of SO₂. Relative humidity or 254 nm UV (ultraviolet) light illumination enhanced the oxidation uptake of SO₂ on O₃-aged BC. The oxidation potentials of the BC particles were detected via dithiothreitol (DTT) assay. The DTT activity over BC was decreased in the process of SO₂ reduction, with the consumption of oxidative active sites.     

多级强化地下水修复技术对NH_4~+-N的去除机制

为解决地下水污染修复技术中PT(抽出处理)和PRB(渗透性反应墙)存在的一些不足,搭建了MET(多级强化地下水修复技术)小试装置,以NH4+-N为目标污染物,研究MET对地下水中NH4+-N的去除效果及机制.结果表明,在进水水力负荷为14.68 m3/(m2·d)、ρ(NH4+-N)为25.0 mg/L的条件下,装置连续运行45 d,NH4+-N去除率呈先降后升、平稳后再下降的趋势,平均值达90%以上.出水ρ(NH4+-N)平均值为2.0 mg/L,其中,硝化作用和微生物同化作用使ρ(NH4+-N)平均下降13.9和5.2mg/L,分别占进水ρ(NH4+-N)的54%和20%;植物作用、基质永久吸附作用和挥发作用分别使ρ(NH4+-N)下降2.9、0.7和0.7mg/L,占进水ρ(NH4+-N)的12%、3%和3%.综上,MET对地下水中NH4+-N的去除率可达90%,实现了高效去除NH4+-N的目标.     

河流氧化亚氮产生和排放研究综述

氧化亚氮(N2O)是仅次于二氧化碳(CO2)和甲烷(CH4)的重要温室气体.由于人类活动对土地的影响导致河流系统中氮的可利用性增加,河流生态系统的N2O排放量正日益增长.本文对国内外河流水体N2O溶存浓度和饱和度、水-气界面排放通量及沉积物-水界面交换通量等数据进行了收集,并总结和分析了河流生态系统中N2O的产生机制及主要影响因子.     

Inhibition effects of aluminum dust explosions by various kinds of ammonium polyphosphate

In this work, vinyltriethoxysilane (A151) and 3-aminopropyltriethoxysilane (KH550) were used to modify ammonium polyphosphate (APP), showing that the dispersibility of APP could be improved remarkably by A151 and KH550. The maximum explosion pressure of aluminum dust explosion decreased with the addition of APP, A151-APP (APP-A) and KH550-APP (APP-B), with the exception of the case where the inerting ratio (α) of APP-A was less than 0.4. After the addition of APP-B, there was little difference in flame propagation behavior and explosion pressure compared with that of adding APP, indicating that APP-B could retain the inhibition performance of APP compared with APP-A. When the inerting ratios of APP, APP-A and APP-B were 1.2, 1.4 and 1.4, respectively, the aluminum dust explosion could be completely inhibited. The explosion residues of aluminum dust/APP mainly consisted of Al₂O₃, P-containing and N-containing compounds. It could be analyzed that APP exerted the inhibition effect through both chemical and physical effects.     

A thermal hazard risk evaluation of emulsion polymerisation and vinyl acetate monomers in the latex manufacturing process

Latex is extensively used in industrial products. However, completing some processes at scale leads to unacceptable levels of risk that need to be quantified and mitigated. Systemic risks must be eliminated wherever possible, and safety takes priority over efficiency and quality. To assess the process risks accurately, four raw materials were examined in this study: polyvinyl acetate (PVA), latex process-initiator-ammonium persulfate (APS) and hydrogen peroxide (H₂O₂), and vinyl acetate monomer (VAM). The physicochemical composition of the PVA latex process was determined via calorimeters, including differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2). The calorimetry results showed that the protective colloid was a critical component in the polymerisation reaction. In addition, when adding initiators to the system, it is vital to observe the normal ratio of materials and keep the stirring system operating. The scenario system also simulated the effects of shutting down various inhibitory programs, including the build-up of free radicals that could result in a runaway reaction when the initiator was added in excess. On the other hand, the result of the risk matrix displayed as a medium level, indicating that although the probability of an accident is low, the resulting severity is at disaster level. As a result, this study provides process safety engineers with a reliable frame of reference for assessing the potential dangers in the PVA latex manufacturing process.     

Experimental and theoretical research on the inhibition performance of ethanol gasoline/air explosion by C6F12O

The safety issue of ethanol gasoline and the methods to control or weaken its explosion have attracted attention. To clarify the effect of C₆F₁₂O (perfluoro(2-methyl-3-pentanone)) on the explosion of ethanol gasoline-air mixtures and intrinsic mechanism, the explosion overpressure and flame propagation behavior under different equivalence ratios (φ = 0.6–0.8) and C₆F₁₂O concentrations (χ_inh = 0–4.0%) were experimentally obtained. The detailed inhibitor reaction process was also obtained by CHEMKIN based on a new assembly kinetic mechanism. The results show that the effects of C₆F₁₂O on the explosion characteristics of ethanol gasoline varied with χ_inh and φ. For rich flames, C₆F₁₂O is more effective than and heptafluoropropane (C₃HF₇) and nitrogen (N₂) in suppressing explosions; for lean and equivalence ratio flames, the addition of C₆F₁₂O may result in more severe explosions. The decrease in chemical reactivity is mainly because the mole fractions of OH and H radicals and the proportion of paths H radicals involved decrease after adding C₆F₁₂O, and R1500: CF₃COF + H = CF₃CO + HF, R965: CF₂:O + H = CF:O + HF, R863: CF₃ + H = CF₂ + HF are main suppressing reactions.     

Experimental investigation of the performance of modified expanded graphite powder doped with zinc borate in extinguishing sodium fires

Sodium is the main cooling medium in the circuit of fourth-generation nuclear reactors, and its leakage constitutes a severe fire hazard because of its high chemical activity. In this study, expandable graphite (EG), which is a traditional sodium fire-extinguishing agent, was modified with zinc borate (ZB) as an intercalator, and the modified EG_ZB was characterized. Moreover, the effectiveness of the modified EG_ZB in extinguishing sodium fires was tested using a self-developed fire-extinguishing experimental device. This study's results indicated that EG, EG_ZB had a smaller particle size, higher thermal stability, higher fire-extinguishing speed, and lower powder mass consumption than EG. During the fire-extinguishing process, ZnO decomposed by ZB captured free radicals and inhibited the combustion reaction. Furthermore, B₂O₃ was adsorbed on the surface of the EG layer, which strengthened covering and asphyxiation. The findings of this study provide crucial information for effectively controlling fires caused by active metals and metallo-organic compounds.