血压监护系统的电路分析和印刷电路板设计

本文介绍了血压监护系统的电路设计,其中前端电路的设计采用差分多级放大电路,达到放大的效果。应用PSpice软件对滤波电路进行了仿真,得到了带通滤波器的通带频率,验证了滤波器设计的可行性。同时本文对血压监护系统印刷电路板中电磁兼容问题进行了研究,对血压监护系统电路板的布局布线规则进行了规划和设计。     

中频熔炼炉测温仪电磁兼容设计与研究

中频熔炼炉测温仪工作在较强电磁场的环境中,对其电磁兼容设计是十分必要的。首先介绍了测温仪的抗干扰总体设计原理,给出了产生电磁干扰因素,提出了测温仪的各种抗电磁干扰措施,如屏蔽技术、接地与滤波技术等。实践表明,以上的各种措施提高了中频熔炼炉测温仪的电磁兼容性能。     

以印刷电路板废粉末料制取碱式碳酸铜的研究

印刷电路板废粉末料的资源化和无害化问题日益得到重视。以报废印刷电路板经机械粉碎和分选后的非金属粉(铜含量1%～5%)为原料,采用"氨浸—脱氨—干燥"的工艺制备碱式碳酸铜,设计了实验装置,考察了氨浸分离工艺条件,通过实验验证了其可靠性:铜的回收率达到98.8%以上,获得了纯度不小于98.0%的碱式碳酸铜,采用X射线粉末衍射(XRD)﹑扫描电镜(SEM)和能谱(EDS)方法对产品进行了分析和表征。     

应用高频气力分选机分选电子废料碎片的研究

进行了实验室高频气力分选机分选3～0.3 mm印刷电(线)路板模拟物料的研究.结果表明,在振频为1 621次/min,上升风量为120 m3/h,95 m3/h,60 m3/h,床面横向倾角6.64°,纵向倾角为1.07°时,金属回收率达93.95%;重产物金属品位为89.19%;轻产物中非金属的品位达99.33%.0.5～0.3 mm细粒物料的分选效果也是令人满意的.     

环境样品中非邻位取代共平面多氯联苯的测定

本文对测定实际环境样品中痕量非邻位取代共平面多氯联苯的方法进行了研究。样品萃取，净化后，经活性碳性层析分离，利用ＧＣ－ＥＣＤ毛细管柱双柱定性，外标法进行定量，测定了土壤和鱼肌肉中μｇ·ｋｇ＾－１数量级的３，３‘，４，４’－四氯联苯及ｎｇ·ｇｋｇ＾－１数量级的３，３‘，４’，５－五氯联苯。     

Hough变换在PCB在线检测系统的应用

在印刷电路板(PCB)视觉检测系统中,图象边缘提取的质量和对瑕疵图象边缘的快速而准确的识别是达到实时检测的关键因素,Hough变换是一种应用非常广泛的图像边缘检测技术,运用快速的Hough变换方法,来完成PCB检测的圆心定位和半径测定,并通过针时PCB在线检测的具体应用情况加以改进并应用,实验分析表明,该算法在PCB在线检测的可行性和优越性.图5,参5.     

Chlorophenols in lake bottom sediments: A retrospective study of drinking water contamination

Lake and brook bottom sediments were analyzed for chlorophenols to provide historical data of exposure assessment, after the water intake plant of a Finnish village had been found to be contaminated in 1987, and subsequently elevated non-Hodgkin lymphoma risk was detected. Highly elevated 2,3,4,6-tetrachlorophenol and pentachlorophenol levels were found in all four lake sediment cores investigated. The distribution was uneven with much higher concentrations in the estuary, in contrast to PCB compounds which were more evenly distributed within the basin. The inlet origin of the chlorophenols in the sediments was further supported by the regional distribution pattern of these compounds in the sediment and water along transects of the inlet and its tributaries. The composition of chlorophenol congeners in the sediments was similar to that in a commercial fungicide used by a local sawmill, but different from other sediment analyses reported in Finland, also implying a local source. Dating of three cores by Pb-210 and soot ball chronology indicated that the contamination of the watercourse started in the early 1970s at the latest but possibly earlier. This would provide the latency time required for tumour appearance in the 1970s and 1980s.     

关于多氯联苯测定的探讨

对PCB测定中所使用的Aroclor和单体标准品的区别、联系和使用进行了分析阐述,并对PCB测定中的气相色谱法、气相色谱质谱联用法、生物分析法、免疫分析法的优点、局限性进行了比较.对今后的PCB的测定提出了建议。     

福建近岸表层海水中阴离子表面活性剂和PCB的污染

用亚甲蓝分光光度法和GC-ECD法分别对福建近岸表层海水中的阴离子表面活性剂和PCBs进行了分析,初步探讨了表层海水中这两类污染物的来源.表层海水中阴离子表面活性剂浓度范围为0.04～1.987 mg/L,较高浓度值站点主要位于九龙江口、闽江口和湄洲湾海域.PCBs的浓度在3.9～367.1 ng/L之间,整体上近岸站点浓度值比离岸站点高,中北部浓度值比南部高.与其他地区的研究结果及海水水质标准进行比较,福建沿海表层海水中阴离子表面活性剂和PCB的污染都较为严重.     

多氯联苯电容器焚烧系统预处理装置的工程设计

介绍了多氯联苯电力电容器焚烧系统预处理装置的工程设计及多氯联苯电力电容器切割装置实用新型专利技术 (专利号 96 115 4 4 9.7)的具体实施情况 ,并借鉴国外处理固体废物设备的设计 ,对切割后的电力电容器进行分选