首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   285篇
  免费   39篇
  国内免费   115篇
安全科学   17篇
废物处理   42篇
环保管理   19篇
综合类   173篇
基础理论   62篇
污染及防治   95篇
评价与监测   11篇
社会与环境   20篇
  2023年   2篇
  2022年   4篇
  2021年   6篇
  2020年   5篇
  2019年   12篇
  2018年   12篇
  2017年   8篇
  2016年   25篇
  2015年   24篇
  2014年   26篇
  2013年   68篇
  2012年   19篇
  2011年   26篇
  2010年   21篇
  2009年   13篇
  2008年   12篇
  2007年   26篇
  2006年   17篇
  2005年   23篇
  2004年   16篇
  2003年   15篇
  2002年   11篇
  2001年   9篇
  2000年   8篇
  1999年   6篇
  1998年   5篇
  1997年   3篇
  1996年   6篇
  1995年   2篇
  1994年   3篇
  1993年   1篇
  1992年   1篇
  1991年   1篇
  1990年   1篇
  1989年   1篇
  1988年   1篇
排序方式: 共有439条查询结果,搜索用时 15 毫秒
11.
选用正十六烷模拟润滑油,通过振荡平衡实验,考察了两种含氮脂肪酸型生物降解促进剂(甲基二乙醇胺油酸酯(MDEAO)和油酸二乙醇酰胺(ODEA))对水土体系中正十六烷吸附行为的影响。实验结果表明:正十六烷在水土体系中的有机质标化分配系数与土壤种类无关,与生物降解促进剂种类有关;土壤对正十六烷的吸附过程更符合Freundlich等温吸附模型;MDEAO的临界胶束浓度为2.0 mg/L,对土壤吸附正十六烷有一定的促进作用,ODEA的临界胶束浓度为0.7 mg/L,形成的胶束对正十六烷的增溶效果明显,促进了正十六烷在土壤中的解吸。  相似文献   
12.
微等离子弧放电催化水处理技术的研究   总被引:1,自引:0,他引:1  
采用钛为阳极的微等离子弧放电技术,研究了在模拟废水处理中放电催化效应及其机理,发现该技术对甲基橙有好的放电催化处理效果.甲基橙的脱色程度与峰值电压、脉冲频率、占空比、阳极电极面积等有关.在0.3mol·L-1的H3PO4电解液中,在峰值电压为550V、脉冲频率200Hz,占空比1∶180、阳极电极面积50mm×50mm条件下,20min内600mL、20mg·L-1的甲基橙溶液脱色率达90%.实验结果表明,该放电催化体系具有协同效果好、能效高、反应器设计要求简单等特点,是一种有发展前景的水处理新技术.  相似文献   
13.
The contamination of methyl ten-butyl ether (MTBE) in underground waters has become a widely concerned problem all over the world. In this study, a novel dosed culture system with oxygen supplied by H2O2 was introduced for MTBE aerobic biodegradation. After 7 d, almost all MTBE was degraded by a pure culture, a member of β-Proteobacteria named as PMI, in a closed system with oxygen supply, while only 40% MTBE was degraded in one without oxygen supply. Dissolved oxygen (DO) levels of the broth in closed systems respectively with and without H2O2 were about 5-6 and 4 mg/L. Higher DO may improve the activity of monooxygemase, which is the key enzyme of metabolic pathway from MTBE to tert-butyl alcohol and finally to CO2, and may result in the increase of the degrading activity of PM1 cell. The purge and trap GC-MS result of the broth in closed systems showed that tea-butyl alcohol, isopronol and acetone were the main intermediate products.  相似文献   
14.
Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al2O3) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.  相似文献   
15.
催化燃烧处理有机废气及催化剂中毒的防止   总被引:6,自引:0,他引:6  
研究了在Pt、Pd、Ce多组分蜂窝状催化剂上乙醇、环己烷和苯的氧化性能及水蒸气对催化剂活性的影响,探讨了如何防止硫化氢和甲硫醇引起的催化剂中毒。  相似文献   
16.
采用溶胶-凝胶法,在聚苯乙烯(PS)/CdS核壳纳米颗粒表面包覆致密TiO_2层,制备出具有双壳层结构的PS/CdS/TiO_2纳米复合颗粒,考察了制备条件对材料结构的影响,并利用甲基橙溶液对其光催化性能进行了评价。SEM、TEM、XRD和FTIR分析结果表明,制得的微球单分散性良好,壳层包覆完整,厚度均匀。PS/CdS/TiO_2制备的适宜反应时间为12~18 h,适宜反应pH为7~9。PS/CdS/TiO_2较PS/CdS具有更为优异的可见光催化性能。  相似文献   
17.
以FTO导电玻璃作为阳极、石墨电极作为阴极电解模拟甲基橙废水,优化了工艺条件,并对甲基橙的降解机理进行了初步探究。实验结果表明,在NaCl投加量5 g/L、电压8 V、废水pH 6、初始甲基橙质量浓度6.0 mg/L的优化条件下电解30 min,废水的脱色率达91.3%,COD降低了62%。机理研究结果表明,电解产生的羟基自由基与甲基橙发生氧化还原反应,破坏了甲基橙的显色基团,使其内部某些化学键发生断裂,从而达到脱色的目的。  相似文献   
18.
采用柠檬酸-硝酸盐燃烧法制备了光催化剂BiFeO3。采用SEM,XRD,FTIR等技术对光催化剂BiFeO3进行表征。表征结果显示,光催化剂BiFeO3晶相纯、粒径小、比表面积大,存在Fe#x02014;O的弯曲振动和伸缩振动。实验结果表明:通过鼓气及加入H2O2可有效提高BiFeO3对甲基紫可见光催化降解的效率;在300mL质量分数为1.5#x000d7;10-5的甲基紫溶液中加入0.9g光催化剂BiFeO3和0.1mL质量分数为30%的H2O2溶液,当反应时间为240min时,甲基紫去除率可达99%。  相似文献   
19.
Two industrial sites were investigated based on years of available hydrogeologic information and monitoring data for soil and groundwater. Collected data were forensically evaluated using age-dating and fingerprinting methods. The previous business uses of the project sites were as a gas station, laundry/dry-cleaning service, and car wash with petroleum underground storage tanks (USTs). As a result, these sites were exposed to a number of toxic contaminants at relatively high concentrations. Source control was necessary for successful remediation and the ultimate removal of the remaining compounds from these industrial sites. Although contaminated soil around the source was excavated during the remedial action and the high concentrations of contaminants were reduced, typical groundwater contaminants such as petroleum hydrocarbons as gasoline (TPH-G), benzene, toluene, ethylbenzene, xylenes (BTEX), and oxygenates including methyl tert-butyl ether (MTBE), diisopropyl ether (DIPE), ethyl tert-butyl ether (ETBE), tert-amyl methyl ether (TAME), and tert-butyl alcohol (TBA) were persistently found at the studied sites around the source points. The plume and concentration of contaminants had changed their shapes and strength for all monitoring periods. Thus, additional source control seems to be a requirement for the complete removal of source contamination, which must be ascertained with groundwater and soil monitoring on a regular time base. For the study sites, monitored natural attenuation was relatively feasible for the long-term plan; however, it did not offer a perfect remediation solution for an ultimate goal because of residual toxic compounds that might have affected the surrounding residential areas at higher concentrations than their health limits. Therefore, as a remediation strategy, the combination of clean-up technology and natural attenuation with monitoring activities are more highly recommended than either clean-up or natural attenuation used separately.  相似文献   
20.
孙亚月  佘铜 《化工环保》2014,34(6):590-594
以钠基蒙脱土(MMT)为载体,先采用溶胶-凝胶法将纳米TiO2引入到MMT层间,再采用化学沉积法将纳米Cu2O负载在TiO2/MMT上,制备出TiO2-Cu2O/MMT纳米复合光催化剂。采用XRD、SEM、紫外-可见漫反射技术对催化剂进行了表征。以甲基橙为目标污染物,考察了催化剂的光催化性能。表征结果显示:TiO2与Cu2O均匀分布在MMT的表面与片层孔隙中;TiO2-Cu2O/MMT结合了TiO2和Cu2O的特性,拓宽了催化剂的光吸收范围。实验结果表明,在光源为可见光、初始甲基橙质量浓度为20 mg/L、光催化剂加入量为2 g/L的条件下,TiO2-Cu2O/MMT纳米复合光催化剂对甲基橙的光催化降解效果明显优于单一负载的Cu2O/MMT和TiO2/MMT,大幅提高了催化剂的光催化效率,反应300 min时TiO2-Cu2O/MMT对甲基橙溶液的脱色率达到93%。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号