重金属由水相到沉积物相的标准迁移自由能

采用电位法测定了淀山湖水体中,Cu、Zn、Pb、Cd等重金属的氯化物由水相到沉积物相的标准迁移自由能(△Gt0)。结果表明,重金属离子的△Gt0随沉积物-水悬浮液中的沉积物含量增加而减小;△Gt0的大小次序为:Cd2+>Pb2+>Cu2+>Zn2+,即Zn2+最易迁入沉积物中,而Cu2+、Pb2+、Cd2+依次减弱,这同重金属离子在沉积物/水两相间的分配系数大小相一致。     

Use of wastes derived from earthquakes for the production of concrete masonry partition wall blocks

Utilization of construction and demolition (C&D) wastes as recycled aggregates in the production of concrete and concrete products have attracted much attention in recent years. However, the presence of large quantities of crushed clay brick in some the C&D waste streams (e.g. waste derived collapsed masonry buildings after an earthquake) renders the recycled aggregates unsuitable for high grade use. One possibility is to make use of the low grade recycled aggregates for concrete block production. In this paper, we report the results of a comprehensive study to assess the feasibility of using crushed clay brick as coarse and fine aggregates in concrete masonry block production. The effects of the content of crushed coarse and fine clay brick aggregates (CBA) on the mechanical properties of non-structural concrete block were quantified. From the experimental test results, it was observed that incorporating the crushed clay brick aggregates had a significant influence on the properties of blocks. The hardened density and drying shrinkage of the block specimens decreased with an increase in CBA content. The use of CBA increased the water absorption of block specimens. The results suggested that the amount of crushed clay brick to be used in concrete masonry blocks should be controlled at less than 25% (coarse aggregate) and within 50-75% for fine aggregates.     

可吸入颗粒物研究现状及发展综述

可吸入颗粒物严重影响空气质量和人体健康。人类对可吸入颗粒物的研究已经取得了相当多的成果,对其来源、组分及形成等都有了一定的认识。本文详细的综述了这部分内容,并对可吸入颗粒物的采样、分离和分析方法都做了介绍。更深层的认识可吸入颗粒物的生成机理和脱除手段是以后努力研究的方向。     

Uncertainty analysis using a fugacity-based multimedia mass-balance model: Application of the updated EQC model to decamethylcyclopentasiloxane (D5)

The EQuilibrium Criterion (EQC) model developed and published in 1996 was recently revised to include improved treatment of input partitioning and reactivity data, temperature dependence and an easier sensitivity and uncertainty analysis. This New EQC model was used to evaluate the multimedia, fugacity-based fate of decamethylcyclopentasiloxane (D5; CAS No. 541-02-6) in the environment over a temperature range of 1–25 °C. In addition, Monte Carlo uncertainty analysis was used to quantitatively determine the influence of temperature and input partitioning and reactivity data on the behavior of D5 under various emission scenarios. Results indicated that emission mode was the most influential factor determining the fate and distribution of D5 in the model environment. When emitted to air and soil, D5 partitioned to and remained in the air compartment where rates of removal from degradation and advection processes were relatively rapid. In contrast, D5 emitted to water resulted in a substantial mass fraction of D5 being accumulated in the sediment compartment, where rates of removal from degradation and advection processes were slow. The mass distributions and fate of D5 in the model environment were strongly influenced by multiple input parameters, including temperature, the mode of emission (especially emission rate to water), K_OC and half-life in air. As temperature decreased from 25 °C to 1 °C, K_OC and half-life in air became increasingly more influential such that the mass distribution of D5 increased in air and decreased in sediment, resulting in decreased overall persistence.     

阴-阳离子有机膨润土吸附水中苊的性能及机理研究

用溴化十二烷基三甲铵（DTMAB）、十二烷基硫酸钠（SDS）、十二烷基苯磺酸钠（SDBS）按不同配比制得一系列阴一阳离子有机膨润土,研究了有机膨润土吸附水中苊的性能及机理。结果表明,阴一阳离子有机膨润土对水中苊的吸附去除能力大于单阳离子有机膨润土,且与改性时所用阴离子表面活性剂的种类、浓度有关;阴一阳离子有机膨润土对苊的吸附等温线呈线性,吸附机理主要是分配作用。     

Advances in photocatalytic disinfection of bacteria: Development of photocatalysts and mechanisms

Photocatalysis has attracted worldwide attention due to its potential in solar energy conversion. As a “green” advanced oxidation technology, it has been extensively used for water disinfection and wastewater treatment. This article provides a review of the recent progress in solar energy-induced photocatalytic disinfection of bacteria, focusing on the development of highly efficient photocatalysts and their underlying mechanisms in bacterial inactivation. The photocatalysts are classified into TiO₂-based and non-TiO₂-based systems, as TiO₂ is the most investigated photocatalyst. The synthesis methods, modification strategies, bacterial disinfection activities and mechanisms of different types of photocatalysts are reviewed in detail. Emphasis is given to the modified TiO₂, including noble metal deposition, non-metal doping, dye sensitization and composite TiO₂, along with typical non-TiO₂-based photocatalysts for bacterial disinfection, including metal oxides, sulfides, bismuth metallates, graphene-based photocatalysts, carbon nitride-based photocatalysts and natural photocatalysts. A simple and versatile methodology by using a partition system combined with scavenging study is introduced to study the photocatalytic disinfection mechanisms in different photocatalytic systems. This review summarizes the current state of the work on photocatalytic disinfection of bacteria, and is expected to offer useful insights for the future development in the field.     

Investigation of partitioning mechanism for volatile organic compounds in a multiphase system

Laboratory experiments were performed to investigate the partitioning behavior of a set of diverse volatile organic compounds (VOCs). After equilibration at a temperature of 25 °C, the VOC concentrations were measured by headspace method in combination with gas chromatography/mass spectrometry (GC/MS). The obtained data were used to determine the partition coefficients (K_P) of VOCs in a gas-liguid-solid system. The results have shown that the presence and nature of solid materials in the working solution control the air-water partitioning of dissolved VOCs. The air/solution partitioning of BTEX and C₉-C₁₀ aldehydes was most affected in the presence of diesel soot. K_P values decreased by a factor ranging from 1.5 for toluene to 3.0 for ethylbenzene. The addition of mineral dust in the working solution exhibited greater influence on the partitioning of short aldehydes. K_P values decreased by a factor of 1.8. The experimental partition coefficients were used to develop a predictive model for partitioning of BTEX and n-aldehydes between air, water and solid phases.     

Sorptive domains of pine chars as probed by benzene and nitrobenzene

Chars were generated by pyrolyzing pine wood at temperatures between 300 °C and 700 °C for 6 h and at 500 °C for 10-300 min. Their organic content and surface acidity decreased, and BET surface area increased, with increasing pyrolytic temperature and time. The uptake of benzene and nitrobenzene increased with increasing pyrolytic temperature and time with isotherms characterized by a transition from less to more concave-downward. The isotherms with low-temperature and short-time chars were fitted to the dual Langmuir-partition model, whereas those with high-temperature chars to the dual-Langmuir model. Calculations suggest that the organic phases of chars functioned as partition media and the uptake of benzene and nitrobenzene on carbonized chars occurred first in micropores via pore-filling and later in larger pores through capillary condensation and adsorption. It is concluded that chars may be considered to consist of the partition domain, the high-energy micropores domain and the low-energy large pores domain.     

1,2,4,5-四氯苯 C 18 Empore TM 膜/水分配系数的研究

研究了1,2,4,5-四氯苯在C18膜／水相之间的分配规律。1,2,4,5-四氯苯在：25℃,80r／min条件下恒温震荡96h可达分配平衡,温度和盐度对1,2,4,5-四氯苯C18膜／水的分配过程影响很小,1,2,4,5-四氯苯C18膜／水分配平衡时间受溶液体积和容器容积的影响,但不受溶液中C18膜膜量的影响,推测脂溶性小于或接近1,2,4,5-四氯苯的有机污染物在恒温震荡条件下C18膜与水之间的分配96h可达到平衡。