Removal of carbofuran is not affected by co-application of chlorpyrifos in a coconut fiber/compost based biomixture after aging or pre-exposure

Biomixtures constitute the biologically active part of biopurification systems(BPS), which are used to treat pesticide-containing wastewater. The aim of this work was to determine whether co-application of chlorpyrifos(CLP) affects the removal of carbofuran(CFN)(both insecticide/nematicides) in a coconut fiber–compost–soil biomixture(FCS biomixture), after aging or previous exposure to CFN. Removal of CFN and two of its transformation products(3-hydroxycarbofuran and 3-ketocarbofuran) was enhanced in pre-exposed biomixtures in comparison to aged biomixtures. The co-application of CLP did not affect CFN removal, which suggests that CLP does not inhibit microbial populations in charge of CFN transformation.Contrary to the removal behavior, mineralization of radiolabeled14C-pesticides showed higher mineralization rates of CFN in aged biomixtures(with respect to freshly prepared or pre-exposed biomixtures). In the case of CLP, mineralization was favored in freshly prepared biomixtures, which could be ascribed to high sorption during aging and microbial inhibition by CFN in pre-exposure. Regardless of removal and mineralization results, toxicological assays revealed a steep decrease in the acute toxicity of the matrix on the microcrustacean Daphnia magna(over 97%) after 8 days of treatment of individual pesticides or the mixture CFN/CLP.Results suggest that FCS biomixtures are suitable to be used in BPS for the treatment of wastewater in fields where both pesticides are employed.     

Inherently safer design review and their timing during chemical process development and design

This paper discusses the enhancement of inherent safety review and its implementation in the chemical process development and design. The aim is to update and improve the existing inherently safer design review (ISDR) practices during design of chemical process plant by exploiting major accident cases from the U.S. Chemical Safety Board (CSB) and Failure Knowledge Database (FKD). Although the basic guidelines to conduct ISDR during design phase are available, however they are too general and incomplete. The review criteria and their best timing for application are still missing. This paper attempts to develop the accident-based ISDR for chemical process plant design. The proposed accident-based ISDR is supported with detail review criteria for each phase of process design. The timing of ISDR application is corresponding to the common design tasks and decisions made in the design project. Therefore, timely design review could be done at the specific design task and the findings help designer to make a correct decision making.     

Pyrolysis of waste tyres: A review

Approximately 1.5 billion tyres are produced each year which will eventually enter the waste stream representing a major potential waste and environmental problem. However, there is growing interest in pyrolysis as a technology to treat tyres to produce valuable oil, char and gas products. The most common reactors used are fixed-bed (batch), screw kiln, rotary kiln, vacuum and fluidised-bed. The key influence on the product yield, and gas and oil composition, is the type of reactor used which in turn determines the temperature and heating rate. Tyre pyrolysis oil is chemically very complex containing aliphatic, aromatic, hetero-atom and polar fractions. The fuel characteristics of the tyre oil shows that it is similar to a gas oil or light fuel oil and has been successfully combusted in test furnaces and engines. The main gases produced from the pyrolysis of waste tyres are H₂, C₁–C₄ hydrocarbons, CO₂, CO and H₂S. Upgrading tyre pyrolysis products to high value products has concentrated on char upgrading to higher quality carbon black and to activated carbon. The use of catalysts to upgrade the oil to a aromatic-rich chemical feedstock or the production of hydrogen from waste tyres has also been reported. Examples of commercial and semi-commercial scale tyre pyrolysis systems show that small scale batch reactors and continuous rotary kiln reactors have been developed to commercial scale.     

The effect of insecticides on the non-target predatory mite Kampimodromus aberrans: Laboratory studies

The side-effects of pesticides on predatory mites have been investigated at various levels and international teams (e.g., the IOBC/wprs Working Group “Pesticides and beneficial organisms”) have selected a few species of predatory mites occurring in Central and Northern Europe as representative for such studies. Key biocontrol species occurring in Southern Europe have received much less attention. Kampimodromus aberrans is the most important predator of herbivorous mites in South-European vineyards treated with selective pesticides. The impact of pesticides on K. aberrans populations has been studied in field conditions whereas few toxicological tests have been conducted in the laboratory because of difficulties in rearing this species. A method for rearing K. aberrans in the laboratory has recently been set up allowing toxicological studies to be conducted. In this paper, a toxicological method to assess the effects of pesticides on K. aberrans is described and the effects of insecticides frequently used in European vineyards on two K. aberrans strains are reported. These strains were collected from vineyards treated with organophosphates. Insecticides characterized by different modes of action were selected for trials. Among these, etofenprox and spinosad were classified as harmful to predatory mites. Chlorpyrifos reduced predatory mite fecundity, and was classified as moderately harmful for both strains. The toxicity of thiamethoxam and flufenoxuron varied with the strain (low to moderate). Indoxacarb and methoxyfenozide appeared to be harmless or slightly harmful. Implications of this study for adopting IPM tactics with a reduced risk for K. aberrans are discussed.     

Mixture Toxicity of the Antifouling Compound Irgarol to the Marine Phytoplankton Species Dunaliella tertiolecta

This study examined the toxicity of irgarol, individually and in binary mixtures with three other pesticides (the fungicide chlorothalonil, and the herbicides atrazine and 2,4-D), to the marine phytoplankton species Dunaliella tertiolecta. Standard 96-h static algal bioassays were used to determine pesticide effects on population growth rate. Irgarol significantly inhibited D. tertiolecta growth rate at concentrations ≥ 0.27 μ g/L. Irgarol was significantly more toxic to D. tertiolecta than the other pesticides tested (irgarol 96 h EC₅₀ = 0.7 μ g/L; chlorothalonil 96 h EC₅₀ = 64 μ g/L; atrazine 96 h EC₅₀ = 69 μ g/L; 2,4-D 96 h EC₅₀ = 45,000 μ g/L). Irgarol in mixture with chlorothalonil exhibited synergistic toxicity to D. tertiolecta, with the mixture being approximately 1.5 times more toxic than the individual compounds. Irgarol and atrazine, both triazine herbicides, were additive in mixture. The toxicity threshold of 2,4-D was much greater than typical environmental levels and would not be expected to influence irgarol toxicity. Based on these interactions, overlap of certain pesticide applications in the coastal zone may increase the toxicological risk to resident phytoplankton populations.     

Bioaccumulation Kinetics and Bioconcentration Factor of Chlorinated Pesticides in Tissues of Puntius ticto (Ham.)

Abstract

Bioaccumulation kinetics and bioconcentration factor (BCF) of chlorinated pesticides like Aldrin, Dieldrin, Benzene hexachloride (BHC), and Dichloro-diphenyl-dichloro-ethane (DDT) in fish tissues of Puntius ticto was studied in detail in a continuous fed system. The bioconcentration process is summarized by using a first order uptake model and the steady-state BCF is calculated based on the 30 days exposure. Rate of bioaccumulation of DDT was maximum of 4.6432 µg g^?1 wet weight per day in liver tissue whereas it was minimum of 0.0002 µg g^?1 wet weight per day in case of Dieldrin in the muscle tissue among the pesticides. It was observed that DDT showed maximum BCF of 89,010 in case of liver tissue of the fish exposed to 30 days. The regression coefficient (r ²) between pesticide concentration and exposure time varied between 0.6212 and 0.9817 indicating high correlation. Based on actual calculated BCF values, the octanol–water partition coefficient (K _ow) values were predicted. In order to prove the hydrophobic property of chlorinated compounds and its affinity towards lipid, the K _ow is predicted. Results showed that pesticide burden differ from tissue to tissue and can be correlated to the lipid content, size, exposure time, and species.     

The division of Europe into regions with similar potential effectiveness and environmental consequences of pesticide application based on expert inclusive research

A division of Europe into regions with similar climate and soil conditions, assuming similar pesticide effectiveness and environmental effects of their application, was developed by a combination of statistical cluster analysis and expert involvement for identifying clustering variables and weighing their importance. The experts identified 15 variables representing climatic, soil and crop structure data and weighted them. In order to maximally simplify the administrative work with pesticide registration resulting from the division of Europe into zones, the additional criteria in the procedure were: the zoning follows existing administrative borders, country divisions by zone boundaries are limited, and situations where a zone consists of parts separated by another zone are avoided. The results of the analyses were compared with the applicable EPPO classification and visualized on maps. The highest similarity was observed in the southern Mediterranean zone, the layout of which differed by only a few regions. The Alpine part, having specific conditions, was not distinguished among the EPPO zones. Our study very clearly delineated the Central European part, having a climate with continental influence, which is distributed among other zones in the EPPO classification.     

化学需氧量（COD）测定法的现状及最新进展

化学需氧量（ＣＯＤ）是水质监测的一个重要参数，本文对化学需氧量的测定现状和最新进展作了简要评述。     

江苏省主要农药产品的环境残留监测方法研究

介绍了江苏省生产的主要农药品种,综述了草甘膦、丁草胺、乙草胺、百草枯和氟乐灵等5种除草剂,代森锰锌、戊唑醇、百菌清、甲基硫菌灵和三环唑等5种杀菌剂,毒死蜱、吡虫啉、氯氰菊酯等3种杀虫剂,以及乙烯利、多效唑等2种植物生长调节剂的生产现状及危害,以及上述农药在水、土壤等环境介质中的检测方法。以期为相关农药残留的检测方法标准化、环境中控制限值的制定、农药类环境事故应急监测以及农药生产与使用的环境监管提供技术支持。     

Disposition of fipronil in rats

In the scientific literature, little attention has been paid to the disposition of fipronil, a phenyl pyrazole insecticide. In this study, the tissue distribution, the metabolic fate, and the elimination of fipronil was investigated in rats using radiolabeled fipronil. When a single oral dose of ¹⁴C-fipronil (10 mg kg⁻¹ b.w.) was given to rats, the proportion of dose eliminated in urine and feces 72 h after dosing was ca 4% for each route. At the end of the experiment the highest levels of radioactivity were found in adipose tissue and adrenals.