Confirmation of polychlorinated biphenyl (PCB) distribution in the blood and verification of simple quantitative method for PCBs based on specific congeners

We measured the concentration of each polychlorinated biphenyl (PCB) congener in whole blood, plasma and blood cells, and investigated the distribution of PCBs in human blood using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). The PCB concentrations in plasma and whole blood in terms of lipid concentrations were almost equal, with a correlation coefficient of r = 0.972. In the blood, the ratio of PCBs in blood cells to those in plasma was generally about 1:9 and the congener distribution patterns in blood cells and plasma were similar.We performed verification of a simple mass screening method by obtaining information on the main PCB congeners for investigations on human accumulation and exposure. The total concentration of the seven PCB congeners (UNEP-7) proposed to the United Nations Environment Programme (UNEP) by Muir and Morita was about 50% of the total concentration of all PCB congeners, and UNEP-30 was about 80%. The seven main congeners in the blood (MCB-7) showed a value that was about 60%, and MCB-30 showed a value that was about 90%. Determinations with the main congeners in the blood showed a correlation of r = 0.990 or more between the main eight congeners (MCB-7 plus #74) and the total PCB concentration for all congeners. The results suggest that, although total PCB concentration can be effectively estimated from the main seven congeners, the main eight congeners would be preferable, and that the use of these congeners in the simple mass screening method would be effective for populations in areas uncontaminated by PCBs.     

Spatial distribution of organochlorine contaminants in soil, sediment, and fish in Bikini and Enewetak Atolls of the Marshall Islands, Pacific Ocean

Several nuclear tests were performed at Enewetak and Bikini Atolls in the Marshall Islands between 1946 and 1958. The events at Bikini Atoll involved several ships that were tested for durability during nuclear explosions, and 24 vessels now rest on the bottom of the Bikini lagoon. Nine soil samples were collected from different areas on the two islands of the atoll, and eighteen sediment, nine fish, and one lobster were collected in the vicinity of the sunken ships. Organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polychlorinated terphenyls (PCTs) in these samples were analyzed using gas chromatography/ion trap mass spectrometry (GC/ITMS). The average recoveries ranged from 78% to 104% for the different PCB congeners. The limits of detection (LOD) for PCBs, PCTs, DDE, DDT, and dieldrin ranged 10-50 pg g⁻¹. Some fish from Enewetak contained PCBs at a concentration range of 37-137 ng g⁻¹, dry weight (dw), and most of the soils from Enewetak showed evidence of PCBs (22-392 ng g⁻¹ dw). Most of the Bikini lagoon sediment samples contained PCBs, and the highest was the one collected from around the Saratoga, an aircraft carrier (1555 ng g⁻¹ dw). Some of the fish samples, most of the soil samples, and only one of the sediment samples contained 2,2-bis(4-chlorophenyl)-1,1-dichloroethylene (DDE) and PCBs. In addition to PCBs, the soils from Enewetak Atoll contained PCTs. PCTs were not detected in the sediment samples from Bikini Atoll. The results suggest local pollution sources of PCBs, PCTs, and OCPs.     

Polychlorinated naphthalenes (PCNs) in riverine and marine sediments of the Laizhou Bay area, North China

PCN congeners were analyzed in marine and riverine sediments of the Laizhou Bay area, North China. Concentrations of PCNs ranged from 0.12 to 5.1 ng g⁻¹ dry weight (dw) with a mean value of 1.1 ng g⁻¹ dw. The levels of PCNs varied largely, with industrial group approximately ten folds higher than those of the rural in riverine sediment. A strong impact by direct discharge from local factories was suggested. Similar compositional profiles were found within groups. High resemblance of compositional profiles between industrial samples and Halowax 1014 was observed. It was indicated that PCNs in riverine sediments were mainly from release of industrial usage, with additional contributions from industrial thermal process at certain sites. In marine sediments, it was suggested that PCNs along the coast of Laizhou Bay were mainly controlled by riverine input. While in the central bay, PCN distributions were possibly impacted by combined multiple factors.     

Environmental site assessments and audits: Building inspection requirements

Environmental site assessment criteria were originally developed by organizations that focused, almost exclusively, on surface, subsurface, and pollution source contamination. Many of the hazards associated with indoor environments and building structures were traditionally not considered when evaluating sources and entities of environmental pollution. Since a large number of building materials are potentially hazardous, careful evaluation is necessary. Until recently, little information on building inspection requirements of environmental problems has been published. Traditionally, asbestos has been the main component of concern. The ever-changing environmental standards have dramatically expanded the scope of building surveys. Indoor environmental concerns, for example, currently include formaldehyde, lead-based paint, polychlorinated biphenyls, radon, and indoor air pollution. Environmental regulations are being expanded and developed that specifically include building structures. These regulatory standards are being triggered by an increased awareness of health effects from indoor exposure, fires, spills, and other accidents that have resulted in injury, death, and financial loss. This article discusses various aspects of assessments for building structures.     

Photodegradation of tetraphenyltin contained in polychlorinated biphenyl-based transformer oil simulants in alkaline 2-propanol solution

The photodegradation of tetraphenyltin (TePT) contained in polychlorinated biphenyl (PCB)-based transformer oil simulants by ultraviolet (UV) irradiation in alkaline 2-propanol solutions was examined. In the absence of PCBs, the TePT level fell to below 1% of the initial concentration within 30 min. In the absence of both PCBs and an alkali, the concentrations of tri-, di-, and monophenyltins initially increased to a few milligrams per liter, and then reduced to below the detection limits within 90 min. The addition of an alkali to the reaction solution slightly accelerated the photodecomposition of TePT. The decomposition of other phenyltins (PTs) was also accelerated. When PCBs with concentrations of approximately 80 times the initial TePT concentration were added, only a small fraction of the TePT decomposed within 100 min. Moreover, the levels of PTs did not change during irradiation. TePT and other PTs did decompose when the level of PCBs was reduced to the same concentration as that of TePT; however, the decomposition rates were slower than those in the absence of PCBs. In the actual treatment process, TePT and other PTs in PCB-based transformer oil are decomposed by catalytic reduction, which is used after UV irradiation. Therefore, in the actual treatment of PCB-based transformer oil wastes, pollution due to PTs can be prevented.     

Levels of Persistent Organochlorine Residues in Eggs of Greater Flamingos from the Guadalquivir Marshes (Doñana), Spain

Organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) residue levels were determined in 53 unhatched eggs from greater roseus flamingos (Phoenicopterus ruber). Eggs were collected in 1996 from the National Park of Doñana (Guadalquivir marshes, Southwest Spain), immediately after one breeding colony abandoned the nesting site due to predator attacks. The main metabolite of p,p′-DDT, p,p′-DDE, was the OCP residue found at higher concentrations, with a geometric mean of 721 ng/g wet weight. Residues of other pesticides, including some hexachlorocyclohexane isomers, hexachlorobenzene, aldrin, heptachlor, and heptachlor-epoxide, were detected at much lower concentrations. The sum of PCBs was 528 ng/g, with PCB congeners #187 and #153 being the most prominent in eggs. The pattern observed in these compounds of industrial origin corresponded more to Aroclor 1260 than to any other commercial mixture. Levels of organochlorine residues indicate a medium degree of exposure, and they are not considered of any concern for the flamingo population. In particular, neither p,p′-DDE nor PCB levels were found to be correlated with the eggshell thickness.     

Chemical dechlorination of polychlorinated biphenyls (PCBs) from dielectric oils

We studied the chemical dechlorination of the polychlorinated biphenyls (PCBs) in some dielectric oils via nucleophilic substitution of the chloro atoms by polyethylene alkoxide. The influence of temperature, ultrasounds, polyethylene glycol (PEG) and base type was investigated. Our findings show that dechlorination of PCBs by chemical treatment is effective at moderate temperature (90–100°C) and is strongly dependent on the nature of matrix oil. Stirring affects the process yield by influencing the homogeneity of the oil/glycol two-phase system. Ultrasounds can improve the process efficiency by making operating conditions less severe. Selected article from the 6th European Meeting on Environmental Chemistry, University of Belgrade, Serbia and Montenegro organized by Prof. Dr. Branimir Jovancicevic ().     

Criteria for the evaluation of dioxins in the environment

In FRG and other countries unequivocal criteria for the limitation of dioxins (PCDD's/PCDF's) in food like vegetables and fruits are lacking. These have to be directly associated with the limitation of dioxins in the soil and the deposition of particulate matter as the two main pathways for plant contamination. Based on recent investigations in the vicinity of cable-waste incinerators in Northrhine-Westphalia with comparatively high contents of dioxins in garden plants and soils and other sources of dioxins, considerations are given for the establishment of the criteria urgently needed.     

Prediction of polychlorinated dibenzofuran congener distribution from gas-phase phenol condensation pathways

A model for predicting the distribution of dibenzofuran and polychlorinated dibenzofuran (PCDF) congeners from a distribution of phenols was developed. The model is based on a simplified chemical mechanism. Relative rate constants and reaction order with respect to phenol precursors were derived from experimental results using single phenols and equal molar mixtures of up to four phenols. For validation, experiments were performed at three temperatures using a distribution of phenol and 19 chlorinated phenols as measured in municipal waste incinerator exhaust gas. Comparison of experimental measurements and model predictions for PCDF isomer distributions and homologue pattern shows agreement within measurement uncertainty. The R-squared correlation coefficient exceeds 0.9 for all PCDF isomer distributions and the distribution of PCDF homologues. These results demonstrate that the distribution of dibenzofuran and the 135 PCDF congeners from gas-phase condensation of phenol and chlorinated phenols can be predicted from measurement of the distribution of phenol and the 19 chlorinated phenol congeners.     

Soil contamination at abandoned sawmill areas

Contamination of soil by technical chlorophenol formulation at wood preserving sites was studied. The examined soils contained 50 to 1000 mg of polychlorinated phenols (CPs), 1 to 50 mg of polychlorinated phenoxyphenols (“pre-dioxins”, PCPPs) and 0.1 to 5 mg of polychlorinated dibenzofurans (PCDFs) per kg of dry soil. CPs were found to be mobile, leaching deep into the soil, while PCPPs and PCDFs accumulated in the top soil. All three classes of contaminants were stable in soil.