低气压试验标准及试验技术分析

详细阐述了低气压环境对装备的各种影响,介绍了我国主要军用、民用环境试验标准中规定的试验程序及其应用对象,分析了有关低气压试验条件,包括低气压贮存、工作和快速/爆炸减压的试验条件和变化速率,最后简单介绍了低气压试验设备的一般要求、特别是快速减压和爆炸减压设备的使用和低气压试验技术。     

A product analysis-based study on the mechanism of inflammable gas explosion suppression

To study the mechanism of the suppressing effect of Expanded Aluminium (EA) on the premixed gas explosion, premixed methane-air and propane-air gases were undergone explosion reaction in the presence of EA in a self-designed closed pipeline with the overpressures and the compositions, rates and sensitivities of products analyzed. The results showed that the 9.5% methane-air and 5% propane-air explosions produced peak pressures decreased by 79.3% and 65.6%, and residual methane and propane contents increased by 270% and 560% respectively than without EA. In addition, the results revealed that the explosions of propane in the presence of EA produced less methane and carbon oxides contents, but more ethylene and propylene contents. The simulation showed that H, O, and OH are the key factors affecting the rate of products. The product compositions, together with other parameters, suggested that EA decreased temperature, inhibited chain initiation and propagation reaction, but facilitated chain termination reaction by advancing and accelerating the gas phase and wall destruction reaction of radicals, especially collisions and concentration of key free radicals. This new research method based on the analysis of explosion products can be used for in-depth research into gas explosion features and shed light on the suppressing mechanism of EA in flammable gas explosion.     

受限空间内惰性气体对CH4爆炸抑制特性研究

N2和CO2是常用的惰性抑爆气体,为研究两种气体的抑爆特性,采用20L球形爆炸试验装置,分析了不同浓度配比条件下N2/CH4/空气以及CO2/CH4/空气混合气体的爆炸压力,同时采集爆炸后的气体样品,对比分析爆炸后残留气体的主要成分。结果显示:随CH4浓度从5%增加至12.5%时,完全抑制CH4爆炸需要的惰性气体最小量先增大后降低,CH4浓度在6.5%~7.5%之间时,抑爆需要的惰性气体的量最大;在同一CH4浓度条件下,抑爆需要N2的量大于CO2,并且CH4浓度在5%~6.5%时,抑爆需要两种惰性气体的量值差别最大;当CH4浓度一定时,随着加入惰性气体量的增大,爆炸最大超压逐渐降低,惰性气体浓度和爆炸超压之间基本呈线性关系;在同样条件下,相对于N2,CO2为抑爆气体时,爆炸后腔体内残留的CH4浓度较高。研究成果为惰性气体抑爆技术提供技术支撑,同时为揭示惰性气体抑爆机理有一定作用。     

Water saving effect on integrated water resource management

This study proposes an improved integrated water resource management (IWRM), in which water conservation was analyzed for the entire water use process. A multi-objective optimization method was applied to optimize the IWRM, which investigated the reduction of freshwater consumption and the total water supply cost. Customer's preference for saving water and an end use analysis (EUA) was applied in the water conservation analysis. Taking Tianjin as the study area, a reduction in customer's economic pressure (EP) was utilized to evaluate the degree of the customer's preference for saving water. The results revealed that agriculture had a greater preference for saving water than other sectors, where as the public had the weakest motivation for saving water. Improving the transportation method could contribute 62.1% of the total water savings in the agriculture sector. The optimization of the IWRM demonstrated that the local freshwater savings would be 21.5%, and the total cost for water supplies would decrease by 13%. However, a government subsidy of 87.5 million Yuan would be needed. Additionally, by analyzing the change in the amount of water savings affected by water price, the appropriate water price increase range was suggested to be 1.5–1.7 times the original price.     

Case study of landfill leachate recirculation using small-diameter vertical wells

A case study of landfill liquids addition using small diameter (5 cm) vertical wells is reported. More than 25,000 m³ of leachate was added via 134 vertical wells installed 3 m, 12 m, and 18 m deep over five years in a landfill in Florida, US. Liquids addition performance (flow rate per unit screen length per unit liquid head) ranged from 5.6 × 10^?8 to 3.6 × 10^?6 m³ s^?1 per m screen length per m liquid head. The estimated radial hydraulic conductivity ranged from 3.5 × 10^?6 to 4.2 × 10^?4 m s^?1. The extent of lateral moisture movement ranged from 8 to 10 m based on the responses of moisture sensors installed around vertical well clusters, and surface seeps were found to limit the achievable liquids addition rates, despite the use of concrete collars under a pressurized liquids addition scenario. The average moisture content before (51 samples) and after (272 samples) the recirculation experiments were 23% (wet weight basis) and 45% (wet weight basis), respectively, and biochemical methane potential measurements of excavated waste indicated significant (p < 0.025) decomposition.     

PLC控制系统在钢渣热焖工艺中的应用

利用PLC控制系统,实现在钢渣热焖工艺中的恒压供水和钢渣热焖定时定量喷水的自动控制要求,具有国际先进水平,取得了良好的经济效益、社会效益和环境效益.     

小型城市污水排放量预测模型研究——以楚雄市为例

针对小城市污水排放量历史数据较少,城市发展变化较大的特点,以楚雄市为例,提出了基于污水排放来源以及生成机理的预测方法。根据历史人口增长趋势以及城镇化率进行城区人口综合预测,运用定额法根据不同行业用水特点预测城市用水量,结合城市污水排放特点对楚雄市近期以及远期城市污水排放量进行科学合理的预测,并对预测结果进行了分析,可为城市发展规划提供决策参考。     

水平对置活塞发动机高空热平衡特性研究

目的研究不同海拔大气压力特别是高空条件对水平对置活塞汽油机热平衡性能的影响。方法利用内燃机高空模拟试验台进行不同海拔高度(0~7000 m)下水平对置活塞汽油机的热平衡试验,测得不同海拔下排温、缸体表面温度等特征参数,计算热流量分配特性,并对比分析热流量分配特性随海拔高度的变化规律。结果随海拔升高,汽油机排温和缸体表面温度逐渐下降,且海拔愈高,缸体表面温度下降幅度愈大。汽油机有效功率随海拔升高逐渐下降,余项损失百分比逐渐上升,且在低转速下,变化幅度增大。在6000 m模拟海拔、3000 r/min转速下,汽油机有效热效率不到5%,而余项损失达到了30%以上,此时部分汽油甚至并未燃烧。结论高空环境对水平对置汽油机热平衡性能造成严重影响,成为制约其高海拔性能恢复的关键因素。     

人类自我科学管理是实现可持续发展的必然选择

现今人口规模的不断膨胀和物质生活水平的日益提高,对资源和环境造成的压力急剧增加。分析了世界现状和可持续发展面临的挑战之后,提出人类要实现可持续发展必须要进行自我科学管理,分别从人类自我定位、对待科技的态度、人口管理、人类消费管理4个方面进行讨论和阐述。人类首先需重新审视自己,进行自我定位;其次要正确对待科技;控制人口数量和转变不合理消费是目前人类自我管理的重要任务,对此提出一些实施对策。     

辽河流域水环境压力及污染治理模式研究

系统分析了辽河流域近十年社会经济和水污染物排放之间的关系,基于污染物排放强度和人均GDP指标,建立辽河流域COD和氨氮环境学习曲线;结合情景分析法预测在现有治污水平下,辽河流域未来水污染物排放趋势及水环境压力。结果表明,辽河流域水环境压力巨大。根据辽河流域污染治理中存在的实际问题,提出新时期的污染治理模式。