萘降解质粒pND6的分离和鉴定

从工业废水中分离的假单胞菌 (Pseudomonassp .)ND6菌株 ,能以萘为唯一碳源生长 ,使无机盐培养基(MM)中 2g/L的萘在 48h内降解 98% .该菌株含有一个 115kb的大质粒pND6 .DNA杂交实验表明 ,pND6质粒含有与恶臭假单胞菌 (P .putida)G7菌株的NAH7质粒同源的萘降解基因 .图 3表 1参 14     

The use of respirometric measurements to determine the toxicity of textile dyes in aqueous solution and after oxidative decolourisation processes

Selected results from the degradation of reactive-dye hydrolysates after UV irradiation, ozonation and sodium peroxodisulphate (NaPS) treatment are presented. Reactive dyes with representative chromophores and anchor groups were chosen for the research project. Different stages of oxidative decolourisation were examined and determined by water parameters for biological degradation (BOD). The paper focuses on toxicity tests with Pseudomonas putida to consider whether the oxidative treatments result in products with a risk for the environment. Tests were performed with the AQUALYTIC^® Sensomat System, which measures biological oxygen demand (BOD). It was determined that the chosen oxidative treatments had as a rule no bearing on respiration of P. putida. Experiments with hydrolysates after short-term UV irradiation resulted in a slightly increased but not long-lasting toxicity in comparison with treatments with ozone or NaPS. Toxic effects were found in tests with hydrolysates of metalliferous dyes. During oxidative treatment, metals were liberated from the chromophores. This did cause complete inhibition of respiration of P. putida. Dye Blue E, a member of a dye class with chlorotriazine anchor groups, was itself found to be toxic, caused by the reactivity of the anchor group. The hydrolysate is only of minor toxicity.     

Development of a Test System for Assessing the Toxicity of Multicomponent Wastes Stored in the Natural Environment

A biological test system is proposed for assessing the toxicity of multicomponent wastes stored in the natural environment, with sewage sludge being used as an example. The principles of creating a test system and ranking the samples of multicomponent masses with respect to environmental hazard are discussed.     

Changes in Extractability of Cr and Pb in a Polycontaminated Soil After Bioaugmentation With Microbial Producers of Biosurfactants, Organic Acids and Siderophores

Partly because of the low bioavailability of metals, the soil cleaning-up using phytoremediation is usually time-consuming. In order to enhance the amount of metals at the plant's disposal, the soil bioaugmentation coupled together with phytoextraction is an emerging technology. In this preliminary work, two agricultural soils which mainly differed in their Cr, Hg and Pb contents (LC, low-contaminated soil; HC, high-contaminated soil) were bioaugmented in laboratory conditions by either bacterial (Bacillus subtilis, Pseudomonas aeruginosa, Pseudomonas fluorescens or Ralstonia metallidurans) or fungal inocula (Aspergillus niger or Penicillium simplicissimum) and incubated during three weeks. The LC soil pots bioaugmented with A. niger and P. aeruginosa contained higher concentrations of Cr (0.08 and 0.25 mg.kg⁻¹ dw soil) and Pb (0.25 and 0.3 mg.kg⁻¹ dw soil) in the exchangeable fraction F1 (extraction with MgCl₂) by comparison with the non-bioaugmented soil where neither Cr nor Pb was detected. Conversely, immobilization of Cr and Pb in the soil were observed with the other microorganisms. The soil bioaugmentation not only modified the metal speciation for the most easily extractable fractions but also modified the distribution of metals in the other fractions, to a lesser extent nevertheless. The difference in microbial concentrations between the bioaugmented or not HC soils reached up to 1.8 log units. Thus the microorganisms that we chose for the soil bioaugmentation were competitive towards the indigenous microflora. The PCA analysis showed close positive relationships between the microorganisms which potentially produced siderophores in the soil and the amount of Cr and Pb in the fraction F1.     

Fe0/荧光假单胞菌联合处理直接耐晒黑的脱色特性

采用荧光假单胞菌(Pseudomonas fluorescen,简称pf菌)与Fe0微粒构建Fe0/pf菌联合体系,处理了含偶氮类染料-直接耐晒黑(C.I.Direct black 19,简称DB19)废水.在中温((35±2)℃)条件下,比较了纯pf菌、纯Fe0微粒和Fe0/pf菌联合体系的脱色能力,并探讨了联合体系中供氧条件、初始pH值、Fe0投加量和染料初始浓度等因素对DB19脱色的影响.结果表明,在微需氧、菌接种量为5％(体积比)的条件下,染料初始浓度为100 mg·L-1、初始pH =7.0、Fe0投加量为500 mg·L-1时,联合体系内脱氢酶活性最高,处理约30 h后可实现90％以上的脱色率;与纯pf菌比较,Fe0/pf菌联合体系达到该脱色率的时间可提前约40 h.UV-vis和FT-IR光谱分析表明,联合体系中DB19染料的脱色过程是通过偶氮键断裂来实现的,而且部分含苯环或萘环结构的中间产物也可被降解.     

1株好氧反硝化菌的分离鉴定和反硝化特性研究

从沈阳北部污水处理厂曝气池的回流污泥中驯化分离得到16株有好氧反硝化能力的菌株,并最终筛选得到1株好氧反硝化能力较强的菌株N6。菌株N6的革兰氏染色为阴性、无芽孢;经16Sr DNA序列分析,鉴定其为假单胞菌(Pseudomonas sp).。反硝化特性实验表明:菌株反硝化的最佳温度是30℃、最适pH值为7、最佳C/N比为15∶1;碳源的种类对菌株的反硝化效果影响很大,菌株N6对丁二酸钠和乙酸钠等小分子碳源的利用相对高于对葡萄糖、蔗糖等大分子碳源的利用,菌株反硝化的最适碳源是丁二酸钠。在最佳降解条件下,菌株24 h对硝酸盐的降解率达98%,并且没有亚硝酸盐的积累。     

绿脓菌素促进铜绿假单胞菌NY3降解烃的作用机制

绿脓菌素（Pyo）的分泌是铜绿假单胞菌NY3最为显著的特征之一,前期实验观察到该菌降解烃时,Pyo分泌量常与烃的降解效率成正相关性,但其在污染物降解中的作用尚未受到关注,且机制不清楚.以共存戊二酸为高分泌Pyo的体系和试剂级Pyo标准物为基础,研究了NY3菌降解烃时,Pyo对细胞内氧化还原酶及其比酶活力和胞外电子传递速率等因素的影响作用.结果表明,戊二酸能够明显提高Pyo的分泌量,相较于无戊二酸体系提高了86.6%,且随Pyo分泌量增加,NY3菌对十六烷去除率增加了16.29%;NY3菌分泌Pyo有利于提高其胞内烷烃氧化酶的活力,在菌体生长至72h、Pyo投加量分别为200,300μL时,相较于未投加Pyo体系,烷烃氧化酶比活力分别提高了121.8%和346.5%.同时Pyo存在下将胞外电子传递速率提高了近7倍,从而增加其对十六烷的降解速率.NY3菌分泌Pyo能通过提高胞内酶活性和胞外电子传递速率而促进NY3菌降解十六烷.     

铁铝复合氧化物对两种细菌的吸附作用研究

铁铝氧化物是土壤的重要组分之一,其对土壤中有机无机组分的迁移具有重要影响.本文以枯草芽孢杆菌和荧光假单胞菌为研究对象,通过批吸附实验和DLVO理论,探究铁铝复合氧化物对细菌的粘附作用及其作用机制.结果表明,铁铝复合氧化物对细菌的粘附随着平衡浓度的增加而增加,吸附过程可用Langmuir方程拟合.铁铝1∶3复合氧化物对枯草芽孢杆菌和荧光假单胞菌的最大吸附量分别为3717.43和2792.29 mg·g~(-1),铁铝3∶1复合氧化物对枯草芽孢杆菌和荧光假单胞菌的最大吸附量分别为3455.58和2760.33 mg·g~(-1).随着pH值的增大,两种铁铝复合氧化物对两种细菌的吸附量均呈下降趋势.铁铝1∶3复合氧化物对两种细菌的吸附量均大于铁铝3∶1复合氧化物.静电吸引力是铁铝复合氧化物与细菌之间相互作用的主要因素之一.     

好氧颗粒污泥及其高效菌株降解苯胺的试验研究

以苯胺为唯一碳源和氮源,培养降解高浓度苯胺废水的好氧颗粒污泥,该体系对苯胺废水的最高耐受浓度高达6 000mg/L.通过分离纯化,从颗粒污泥体系中获得2株具有不同降解特征的苯胺降解菌adx1和adx3,菌株adx1在降解速率上具有明显优势,而菌株adx3对苯胺的最高耐受浓度高于adx1.上述菌株在降解苯胺过程中均遵循Haldane动力学模型,菌株adx1和adx3的最大比较降解速率分别为0.924 g/(g.h)和0.645 g/(g.h),比生长速率分别为0.487 g/(g.h)和0.440 g/(g.h).16S rDNA测序结果表明adx1和adx3分别属于Pseudomonas和Achromobacter属,与好氧颗粒污泥PCR-DGGE指纹图条带1和4测序结果一致,表明上述菌株分别为好氧颗粒化体系中优势菌群之一.     

一株假单胞菌对高粘原油的乳化降解作用

从油田原油污染土壤中筛选出一株以原油为最佳碳源产表面活性剂的假单包菌SY-3。该菌在以原油烃为唯一碳源的无机盐培养基中,除降粘外还能产生甲酸和乙酸。通过单因素试验,确定了降低原油粘度最适条件:初始原油浓度12g/L,氮源为4g/L的混合氮源[硝酸钠和硝酸铵(1:1)],培养温度37℃,接种量5%,初始pH值7.0,培养时间5d。GC谱图分析经SY-3菌降解前后原油组分的变化,可知原油的重质组分含量明显降低,轻质组分含量明显增加,降粘率达56%。表明该菌株对原油有良好的乳化降解能力。