废弃电池能否进入废弃电器电子产品处理目录（第二批）管理的筛选评估分析

2009年2月,国务院发布《废弃电器电子产品回收处理管理条例》,成为我国废弃电器电子产品回收处理的纲领性文件。在《废弃电器电子产品处理目录（第一批）》中,明确将电视机、电冰箱、洗衣机、房间空调器、微型计算机等5种产品纳入第一批目录。同时,为了为了能够及时、客观地与经济发展、技术进步以及电器电子产品行业的发展变化等相适应,《目录》管理委员会起草了《制订和调整废弃电器电子产品处理目录的若干规定》,明确随着经济发展变化及电子产品废弃形势调整电器电子产品处理目录的原则。废弃电池在近几年来在我国增长速度很大,将来的管理形势十分紧迫。本文在此分析我国几种废弃电池（铅酸电池、镍氢电池及锂电池）的产生量、再生处理处置情况及管理政策导向。并在目录一批筛选原则的基础上利用权重分析法,筛选评估废弃电池能否进入废弃电器电子产品处理目录（第二批）管理的可能,研究显示铅酸电池已具备进入管理目录的资质。     

Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures

Fibre reinforced polymer (FRP) materials are being increasingly used in several applications, but especially in the construction and transportation industries. The composites industry is now producing a wide range of FRP products that include strengthening strips and sheets, reinforcing bars, structural profiles, sandwich panels, moulded planks and piping. The waste management of FRP materials, in particular those made with thermosetting resins, is a critical issue for the composites industry because these materials cannot be reprocessed. Therefore, most thermosetting FRP waste is presently sent to landfill, in spite of the significant environmental impact caused by disposing of it in this way. Because more and more waste is being produced throughout the life cycle of FRPs, innovative solutions are needed to manage it. This paper first presents a state-of-the-art review of the present alternatives available to manage FRP waste. It then describes an experimental study conducted on the technical feasibility of incorporating the fine waste generated during the manufacturing of glass fibre reinforced polymer (GFRP) composites in concrete mixtures. Tests were carried out to evaluate the fresh-state and hardened-state properties of concrete mixes in which between 0% and 20% of sand was replaced by GFRP fine waste. Although the incorporation of high proportions of GFRP waste was found to worsen concrete performance in terms of both mechanical and durability-related properties, it seems feasible to incorporate low proportions and reuse GFRP fine waste in concrete, particularly in non-structural applications such as architectural concrete or pavement slabs, where good mechanical properties are less important.     

我国电子废弃物的管理及发展道路研究

我国电子废弃物的处理处置正向产业化方向稳步推进。本文概括了电子废弃物的特点,以及我国目前处理电子废弃物的现状。遵照循环经济理念,并基于我国国情,提出了我国在电子废弃物处理处置过程中应遵循的主要原则和今后的发展方向。     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.     

An information–motivation–behavioral skills assessment of curbside recycling behavior

Despite annual increases in the amount of material solid waste (MSW) that is recycled in the United States, the overall amount of MSW generated continues to increase. In an effort to identify and test specific predictors of curbside recycling behavior, the current study adapted the empirically validated Information–Motivation–Behavioral Skills model (IMB), traditionally used to predict personal health behavior, to explain curbside recycling behavior. Using structured computer assisted telephone surveys with two random community samples; structural equation models indicated that the IMB model significantly predicted curbside recycling. Data from the current study provides specific information about critical psychosocial determinants of curbside recycling behavior and public policy implications.     

Estimation of building-related construction and demolition waste in Shanghai

One methodology is proposed to estimate the quantification and composition of building-related construction and demolition (C&D) waste in a fast developing region like Shanghai, PR China. The varieties of structure types and building waste intensities due to the requirement of progressive building design and structure codes in different decades are considered in this regional C&D waste estimation study. It is concluded that approximately 13.71 million tons of C&D waste was generated in 2012 in Shanghai, of which more than 80% of this C&D waste was concrete, bricks and blocks. Analysis from this study can be applied to facilitate C&D waste governors and researchers the duty of formulating precise policies and specifications. As a matter of fact, at least a half of the enormous amount of C&D waste could be recycled if implementing proper recycling technologies and measures. The appropriate managements would be economically and environmentally beneficial to Shanghai where the per capita per year output of C&D waste has been as high as 842 kg in 2010.     

Recycling of organic materials and solder from waste printed circuit boards by vacuum pyrolysis-centrifugation coupling technology

Here, we focused on the recycling of waste printed circuit boards (WPCBs) using vacuum pyrolysis-centrifugation coupling technology (VPCT) aiming to obtain valuable feedstock and resolve environmental pollution. The two types of WPCBs were pyrolysed at 600°C for 30 min under vacuum condition. During the pyrolysis process, the solder of WPCBs was separated and recovered when the temperature range was 400-600°C, and the rotating drum was rotated at 1000 rpm for 10 min. The type-A of WPCBs pyrolysed to form an average of 67.91 wt.% residue, 27.84 wt.% oil, and 4.25 wt.% gas; and pyrolysis of the type-B of WPCBs led to an average mass balance of 72.22 wt.% residue, 21.57 wt.% oil, and 6.21 wt.% gas. The GC-MS and FT-IR analyses showed that the two pyrolysis oils consisted mainly of phenols and substituted phenols. The pyrolysis oil can be used for fuel or chemical feedstock for further processing. The recovered solder can be recycled directly and it can also be a good resource of lead and tin for refining. The pyrolysis residues contained various metals, glass fibers and other inorganic materials, which could be recovered after further treatment. The pyrolysis gases consisted mainly of CO, CO(2), CH(4), and H(2), which could be collected and recycled.     

The role of intergenerational influence in waste education programmes: the THAW project

Whilst the education of young people is often seen as a part of the solution to current environmental problems seeking urgent attention, it is often forgotten that their parents and other household members can also be educated/influenced via home-based educational activities. This paper explores the theory of intergenerational influence in relation to school based waste education. Waste Watch, a UK-based environmental charity (www.wastewatch.org.uk), has pioneered a model that uses practical activities and whole school involvement to promote school based action on waste. This methodology has been adopted nationally. This paper outlines and evaluates how effective school based waste education is in promoting action at a household level. The paper outlines Waste Watch's 'Taking Home Action on Waste (THAW)' project carried out for two and half years in Rotherham, a town in South Yorkshire, England. The project worked with 6705 primary age children in 39 schools (44% of primary schools in the project area) to enable them to take the "reduce, reuse and recycle message" home to their families and to engage these (i.e. families) in sustainable waste management practices. As well as substantial increases in students' knowledge and understanding of waste reduction, measurement of the impact of the project in areas around 12 carefully chosen sample schools showed evidence of increased participation in recycling and recycling tonnages as well as declining levels of residual waste. Following delivery of the project in these areas, an average increase of 8.6% was recorded in recycling set out rates which led to a 4.3% increase in paper recycling tonnages and an 8.7% increase in tonnages of cans, glass and textiles collected for recycling. Correspondingly, there was a 4.5% fall in tonnages of residual waste. Waste Watch's THAW project was the first serious attempt to measure the intergenerational influence of an education programme on behaviour at home (i.e. other than schools' own waste). It clearly shows that household recycling behaviour can be positively impacted by intergenerational influence via a practical school-based waste education model. However, although the model could potentially have a big impact if rolled out nationally, it will require seed funding and the long-term durability of the model has not yet been fully quantified.     

The effect of recycling price uncertainty on municipal waste management choices

This paper analyzes the effect of price uncertainty and irreversible investment on the decision of municipalities to switch from landfill waste disposal to recycling by developing a model to predict recycling adoption behavior and applying it to empirical data. It is shown that uncertainty regarding the price of recycled materials may induce a risk neutral municipality to prefer landfill disposal, even when recycling is less expensive. A model is developed to describe the switching process and estimate its parameters using empirical data from 79 municipalities in Israel. The model is then used to predict municipalities' recycling adoption decisions under various assumptions regarding price uncertainty. The results support the hypothesis that price uncertainty is a major obstacle for recycling. Finally, several options for price stabilization are sketched and it is argued that these policies may be effective in establishing viable recycling markets.     

Household behaviour and attitudes with respect to recycling food waste--experiences from focus groups

It is a challenge to reduce the ever-increasing flow of waste. In Norway the systems for recycling of organic waste, paper, glass, metals, etc. differ between municipalities, both with regard to organizational and to technological structures. Our hypothesis is that people's attitudes and behaviour may differ with different systems of waste management. People's behaviour and attitudes regarding (organic) waste recycling were investigated in two municipalities with differing technical and organisational systems. Data came from interviews with municipal employees, questionnaires, focus groups and multi-criteria mapping. People seem to be better informed and more positive about organic waste recycling in one of the municipalities (MH, which has recycling of organic waste) than in the other (MS, which has no such recycling). The two municipalities had similar sets of important criteria for waste management (price, environmental friendliness, easy solutions, information). Many participants stated that they had learned from the group process, though only a few reported changed preferences. The institutional context seems to be important for people's behaviour and attitudes towards waste management. This implies that people's recycling behaviour does not only depend on technical and organisational aspects, but also on institutions. These are important messages for policy makers. On an individual basis, the different systems in the two municipalities seem to affect people's stated attitudes. These differences diminish when they are in a common setting where process and dialogue stimulate new thoughts and encourage people to act more altruistically.