Measuring the environmental impact of waste flow management in Brazilian apartment buildings

As biodegradable material represents approximately 70% of household waste in Brazil, any strategy to divert appreciable waste quantities from landfills of necessity has to include valorization and recycling of this material. A societal change of attitude is required to perceive this challenge. Experiments in an urban apartment building are described that produced this change of attitude with a success factor of 80%. Divided waste collection was implemented that separated at the source biodegradable from inert material. Correct collection, handling and display procedures were established. Composting of biodegradable material was carried out under the rooftop of the building as an alternative to using it as animal feed. Half of the inert material entered the reverse logistics chain and was also diverted from the landfill. Waste related material flow through the building is completely quantified, food intake and waste production are related, diversion of both biodegradable and inert waste components from the landfill is measured and the composting process is described. The landfill diversion stands at 61%, mass reduction through the composting process is 80% and matured compost is returned to residents for use in flower cages. The system has been operational for two years and stands out as a precedent in successful decentralized household waste management supported by material flow analysis. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

生活污水中水回用工程设计

采用曝气生物滤池与ClO2结合工艺处理生活废水,具有效果好、流程短、易操作,处理后水可回用等优点,有一定的推广价值。     

A decision support system for wet soil cleaning

Newly developed software can predict the essential characteristics of the sand product resulting from the ex-situ washing of contaminated soil, dredging sludge or breaker sand. The system was designed for the Dutch situation and it works on the basis of readily available information. The primary output of the system is an assessment of the reusability of the sand product, which is obtained by comparing the prediction of the residual contamination and engineering quality with accepted levels and standards for building materials. The system also provides a ranking of potential applications for the sand with respect to treatment cost, the amount of recycled material or the environmental quality of the product. The software integrates soil cleaning expertise and unit process modelling in a way that allows varying levels of refinement of input data, ranging from a simple identification of the pollution source to a detailed particle size distribution of the contaminated soil. Tests on a database containing information on 117 processed batches of soil, dredging sludge and breaker sand show an 80% success rate in predicting cleanability, even though the input contamination levels were predominantly taken from (relatively inaccurate) in-situ data.     

Reducing climate change gas emissions by cutting out stages in the life cycle of office paper

The paper industry's climate change gas emissions are growing. This article considers how to reduce emissions from cut-size office paper by bypassing stages in its life cycle. The options considered are: incineration, which cuts out landfill; localisation, which cuts out transport; annual fibre, which cuts out forestry and reduces pulping; fibre recycling, which cuts out landfill, forestry and pulping; un-printing, which cuts out all stages except printing; electronic-paper, which cuts out all stages. Un-printing may offer the greatest climate change emission reduction. There are uncertainties in this result, particularly in estimating the proportion of waste office paper would be suitable for un-printing.     

Use of Life Cycle Assessment in Environmental Management

The aim of this paper is to demonstrate how life cycle assessment (LCA) can be used to develop strategic policies that can lead to a minimization of the environmental burden resulting from the provision of services or the manufacture, use, and disposal of products within the economy. We accomplish this aim by presenting a case study that evaluates the greenhouse gas contributions of each stage in the life cycle of containerboard packaging and the potential impact on emissions of various policy options available to decision-makers. Our analysis showed that, in general, the most useful strategy was to recycle the used packaging. However, our analysis also indicated that when measures are taken to eliminate sources of methane emissions, then recycling is no longer beneficial from a greenhouse perspective. This is because the process energy required in the form of gas and electricity is substantially greater for containerboard manufactured from recycled material than it is for virgin fiber.     

Extra- and intra-European Union exchanges of recovered materials and products

On the basis of the data Comext from Eurostat, this paper presents 2001 data on the main exchanges (flows) intra-European Union (EU) and with the rest of the world (extra-EU), by countries (for the main countries which are concerned), tonnage and value, by categories of recovered materials and products. A synoptic table is established, the results are summarized, and initial comments are provided. Moreover the evolution from 1995 to 2001 is discussed.The second part of the paper examines what these data tell us:

* whether they are consistent with the main theories of international trade, and which factors explain these exchanges,

* what is the extent of foreign trade of recovered products and materials,

* to what extent the EU appears as ‘an economic entity’,

* and possible effects of the enlargement of the EU.

Green sand reclamation using a fluidized bed with an attrition nozzle

The objective of this study was to determine the technical feasibility of green sand reclamation using attrition in a gas–solid fluidized bed. Reclamation of foundry sand is becoming important as it may help solve concerns related to transportation and dumping of the used sand, and reduce production costs by recycling sand. The crucial step in green sand reclamation is the removal of small clay particles that are bound to the sand particles.For this study two different types of green sand were used and supplied by two different foundries. Tests were performed in a fluidized bed equipped with an attrition nozzle operating at pressures of either 350 or 550 kPa (50 or 80 psig). Attrition experiments for one green sand were performed on either unburned or burned (calcined) green sand, to determine the effect of prior calcination of the green sand on its reclamation potential by attrition. Calcination temperatures of over 700 °C were employed, and the results suggest that calcination facilitates the removal of clay from the green sand.Green sand was analyzed for clay and organic content, acid request, and particle size before and after attrition. Attriting calcined green sand produces the best results. Also experiments conducted at the highest attrition pressure of 550 kPa gave good results. According to the mass balance, the mass lost during the attrition process may be limited to less than 14%, and this could be considered acceptable. The volume of air required for the attrition nozzle is rather high and this may adversely affect the economics of the process.     

Curbside collection of recyclables. II. Simulation and economic analysis

Curbside collection of recyclable material can be expensive because the inherent costs of curbside collection are high, but also because amounts collected per residence are small compared to the total waste stream, and extra activity may be required, such as sorting. In this paper a simulation model is used to investigate the effect of collection method and route characteristics on route time. The simulation models presented calculate set-out amount based on route characteristics, set-out rate (SOR), and participation rate (PR). Route times are estimated for various conditions: constant SOR, constant PR, and constant set-out amount. Furthermore, a method for using route time to estimate vehicle and labor needs is presented, and used to estimate economic costs for one and two-person crew collection methods for the three simulation conditions mentioned above. The two-person crew is found to cost less than the one-person crew, for most simulated conditions.     

A model recycling program for Alabama

Solid waste disposal is becoming a difficult problem for many states. Since 1960, the amount of municipal solid waste (MSW) has been increasing at a rate of 1% per year. More than 75% of the waste is comprised of recyclable materials. Several states have mandated recycling to decrease the volume of waste intended for disposal. Those mandated programs are very popular, but depend on many political, social, and economic factors for success. While Alabama has the manufacturing infrastructure to support a mandated recycling program, no recycling legislation has been promulgated. At this time recycling is only being done on a voluntary basis. A mandatory program with the proper support, education and funding could allow Alabama to recycle much of the 5.2 million tons of waste that are generated within its borders each year.     

The future place of recycling in household waste policy: the case of France

To be rightly implemented, an environmental policy ought to set an institutional framework (goals, rules and instruments) which incents decentralised actors to adopt the appropriate range of technologies. In the household waste management policy, the development of valorisation techniques (and particularly recycling) must be supported by convenient instruments and incentives. The paper analyses the problems encountered with the French household waste policy to ensure the takeoff of recycling techniques. At the moment, a rather under-proportioned institutional setting leads to favour the adoption of incineration with energy recovery at the expenses of recycling. This tends to create a structural bias in favour of incineration.