Eco-Efficiency of Electric and Electronic Appliances: A Data Envelopment Analysis (DEA)

Several papers have studied the eco-efficiency of manufacturing systems to address strategic socioeconomic issues in the context of sustainability analysis. Their goal has been to take into account not only environmental impact aspects throughout the whole life cycle but also to incorporate the associated economic value as well, thus, giving a comprehensive vision of both factors. This paper focuses on different commonplace household electric appliances, comparing their eco-efficiency computed using a data envelopment analysis model. We consider the retail price as a measure of the product’s economic value and the ecopoint LCA score as the assessment of its environmental impact. We conclude that cell phones and the bulky analyzed appliances have the highest eco-efficiency scores, whereas the rest would require a more environmentally friendly redesign and/or an increase in their perceived value to improve their eco-efficiency.     

The Role of Organizational Perception,Perceived Consumer Effectiveness and Self-efficacy in Recycling Advocacy Advertising Effectiveness

Previous academic research into how consumers evaluate advocacy advertising identified many possible paths involving potentially reflexive effects on how people perceive an advocacy advertising sponsor, the advocated issue and themselves. This paper has examined one possible scenario within this complicated phenomenon: that of advertising advocating a specific environmental consumer action, recycling. In the specific context of this study, structural equation modelling demonstrated clear causal relationships among consumer perceptions of the recycling advertisements’ sponsoring organization, consumer self-efficacy and perceived consumer effectiveness of complying with the advocated issue (recycling behaviour). These factors were shown to impact specific advocacy advertising goals (termed message effectiveness in this study) such as behavioural intention toward the advocated recycling issue and perceived changes in how consumers evaluate the sponsoring organization.     

Municipal solid waste management in Thailand and disposal emission inventory

The increasing municipal solid waste (MSW) generation along with the high fraction of organic waste and a common disposal of open dumping is the current scenario in many areas in Thailand. As a response to this problem, the country’s Pollution Control Department (PCD) aims to reduce the MSW generation rate to less than 1 kg/capita/day, increase the collection efficiency, and improve the recovery of recyclables. For many years, more than 60% of the solid waste disposal system in Thailand has been carried out by open dumping. According to the survey conducted by this study, in 2004 there were 425 disposal sites (95 landfills; 330 open dumps) in Thailand and an estimated methane emission of 115.4 Gg/year was generated based on this practice. It has been estimated that the anticipated methane emission in Thailand will rise from 115.4 Gg/year to 118.5 Gg/year if the largest open dumpsites in provinces with no existing landfill are upgraded to sanitary landfill; and it will increase to 193.5 Gg/year if the existing sanitary landfill is upgraded to integrated waste management facilities. Moreover, Bangkok metropolitan have the highest methane emission (54.83 Gg/year) among all the regions in Thailand. The methane emission forecast of 339 Gg/year by 2020 (based on LandGEM methodology) provides a stimulus to create a comprehensive plan to capture and utilize methane as an energy source.     

Recycling disposable cups into paper plastic composites

The majority of disposable cups are made from paper plastic laminates (PPL) which consist of high quality cellulose fibre with a thin internal polyethylene coating. There are limited recycling options for PPLs and this has contributed to disposable cups becoming a high profile, problematic waste. In this work disposable cups have been shredded to form PPL flakes and these have been used to reinforce polypropylene to form novel paper plastic composites (PPCs). The PPL flakes and polypropylene were mixed, extruded, pelletised and injection moulded at low temperatures to prevent degradation of the cellulose fibres. The level of PPL flake addition and the use of a maleated polyolefin coupling agent to enhance interfacial adhesion have been investigated. Samples have been characterised using tensile testing, dynamic mechanical analysis (DMA) and thermogravimetric analysis. Use of a coupling agent allows composites containing 40 wt.% of PPL flakes to increase tensile strength of PP by 50% to 30 MPa. The Young modulus also increases from 1 to 2.5 GPa and the work to fracture increases by a factor of 5. The work demonstrates that PPL disposable cups have potential to be beneficially reused as reinforcement in novel polypropylene composites.     

Household food waste separation behavior and the importance of convenience

Two different strategies aiming at increasing household source-separation of food waste were assessed through a case-study in a Swedish residential area (a) use of written information, distributed as leaflets amongst households and (b) installation of equipment for source-segregation of waste with the aim of increasing convenience food waste sorting in kitchens. Weightings of separately collected food waste before and after distribution of written information suggest that this resulted in neither a significant increased amount of separately collected food waste, nor an increased source-separation ratio. After installation of sorting equipment in households, both the amount of separately collected food waste as well as the source-separation ratio increased vastly. Long-term monitoring shows that results where longstanding. Results emphasize the importance of convenience and existence of infrastructure necessary for source-segregation of waste as important factors for household waste recycling, but also highlight the need of addressing these aspects where waste is generated, i.e. already inside the household.     

Amounts of non-fibrous components in recovered paper

Paper and board recycling is now a central issue in papermaking. Understanding of material flows, as a part of the total production chain, as well as, fibrous and non-fibrous component flows needs further clarification. These flows are studied at a European level, with special focus on Germany and Sweden. Non-fibrous components are discussed in terms of a material which hampers the processing of paper and board. Resource-efficiency improvements, in conjunction with economic benefits, are sought and recycling has been able to fulfil both of these. The main drivers to maximize the use of recovered paper in paper and board manufacturing, have been improved over the last decades. These drivers are cost, environmental image and good technical properties to be used as raw material.The increased recycling rate has reduced the quality of the collected paper, produced recycled paper, and replaced virgin pulp. Also, recycling as a process, like deinking, produces large amounts of waste material that has challenges to find proper utilization. These problem areas are addressed in this paper, too.One focus area in the analysis of statistical information is an estimation of the share of non-fibrous components and fibre volumes of paper in Europe (EU) for the year 2010.     

Recycling of non-metallic fractions from waste electrical and electronic equipment (WEEE): A review

The world’s waste electrical and electronic equipment (WEEE) consumption has increased incredibly in recent decades, which have drawn much attention from the public. However, the major economic driving force for recycling of WEEE is the value of the metallic fractions (MFs). The non-metallic fractions (NMFs), which take up a large proportion of E-wastes, were treated by incineration or landfill in the past. NMFs from WEEE contain heavy metals, brominated flame retardant (BFRs) and other toxic and hazardous substances. Combustion as well as landfill may cause serious environmental problems. Therefore, research on resource reutilization and safe disposal of the NMFs from WEEE has a great significance from the viewpoint of environmental protection. Among the enormous variety of NMFs from WEEE, some of them are quite easy to recycle while others are difficult, such as plastics, glass and NMFs from waste printed circuit boards (WPCBs). In this paper, we mainly focus on the intractable NMFs from WEEE. Methods and technologies of recycling the two types of NMFs from WEEE, plastics, glass are reviewed in this paper. For WEEE plastics, the pyrolysis technology has the lowest energy consumption and the pyrolysis oil could be obtained, but the containing of BFRs makes the pyrolysis recycling process problematic. Supercritical fluids (SCF) and gasification technology have a potentially smaller environmental impact than pyrolysis process, but the energy consumption is higher. With regard to WEEE glass, lead removing is requisite before the reutilization of the cathode ray tube (CRT) funnel glass, and the recycling of liquid crystal display (LCD) glass is economically viable for the containing of precious metals (indium and tin). However, the environmental assessment of the recycling process is essential and important before the industrialized production stage. For example, noise and dust should be evaluated during the glass cutting process. This study could contribute significantly to understanding the recycling methods of NMFs from WEEE and serve as guidance for the future technology research and development.     

Household waste behaviours among a community sample in Iran: An application of the theory of planned behaviour

Understanding the factors influencing recycling behaviour can lead to better and more effective recycling programs in a community. The goal of this study was to examine factors associated with household waste behaviours in the context of the theory of planned behaviour (TPB) among a community sample of Iranians that included data collection at time 1 and at follow-up one year later at time 2. Study participants were sampled from households under the coverage of eight urban health centers in the city of Qazvin. Of 2000 invited households, 1782 agreed to participate in the study. A self-reported questionnaire was used for assessing socio-demographic factors and the TPB constructs (i.e. attitude, subjective norms, perceived behavioural control, and intention). Furthermore, questions regarding moral obligation, self-identity, action planning, and past recycling behaviour were asked, creating an extended TPB. At time 2, participants were asked to complete a follow-up questionnaire on self-reported recycling behaviours. All TPB constructs had positive and significant correlations with each other. Recycling behaviour at time 1 (past behaviour) significantly related to household waste behaviour at time 2. The extended TPB explained 47% of the variance in household waste behaviour at time 2. Attitude, perceived behavioural control, intention, moral obligation, self-identity, action planning, and past recycling behaviour were significant predictors of household waste behaviour at time 2 in all models. The fact that the expanded TPB constructs significantly predicted household waste behaviours holds great promise for developing effective public campaigns and behaviour-changing interventions in a region where overall rates of household waste reduction behaviours are low. Our results indicate that educational materials which target moral obligation and action planning may be particularly effective.     

Dynamic stock and end-of-life flow identification based on the internal cycle model and mean-age monitoring

Planning of end-of-life (EoL) product take-back systems and sizing of dismantling and recycling centers, entails the EoL flow (EoLF) that originates from the product dynamic stock (DS). Several uncertain factors (economic, technological, health, social and environmental) render both the EoLF and the remaining stock uncertain. Early losses of products during use due to biodegradation, wear and uncertain factors such as withdrawals and exports of used, may diminish the stock and the EoLF. Life expectancy prediction methods are static, ignoring early losses and inapt under dynamic conditions. Existing dynamic methods, either consider a single uncertain factor (e.g. GDP) approximately or heuristically modelled and ignore other factors that may become dominant, or assume cognizance of DS and of the center axis of the EoL exit distribution that are unknown for most products. As a result, reliable dynamic EoLF prediction for both durables and consumer end-products is still challenging. The present work develops an identification method for estimating the early loss and DS and predicting the dynamic EoLF, based on available input data (production + net imports) and on sampled measurements of the stock mean-age and the EoLF mean-age. The mean ages are scaled quantities, slowly varying, even under dynamic conditions and can be reliably determined, even from small size and/or frequent samples. The method identifies the early loss sequence, as well as the center axis and spread of the EoL exit distribution, which are subsequently used to determine the DS and EoLF profiles, enabling consistent and reliable predictions.     

Reuse of ornamental rock-cutting waste in aluminous porcelain

Large amounts of solid wastes are discarded in the ornamental rocks industry. This work investigates the incorporation of ornamental rock-cutting waste as a raw material into an aluminous porcelain body, replacing natural feldspar material by up to 35 wt.%. Formulations containing rock-cutting waste were pressed and sintered at 1350 °C. The porcelain pieces were tested to determine their properties (linear shrinkage, water absorption, apparent density, mechanical strength, and electrical resistivity). Development of the microstructure was followed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The results showed that ornamental rock-cutting waste could be used in aluminous porcelains, in the range up to 10 wt.%, as a partial replacement for traditional flux material, resulting in a valid route for management of this abundant waste.