镀镍漂洗废水中有机物的臭氧氧化处理研究

用臭氧氧化处理镀镍漂洗废水中的有机物,主要考察pH、臭氧投加量、废水初始COD浓度、温度等因素对处理效果的影响,并对反应机理进行初步的探讨.实验结果表明,废水的COD去除率随pH的增大而升高,比较适宜的pH为6～7;适当地增加臭氧投加量有利于提高COD去除率;在一定温度范围(15～35℃)内,提高反应温度有利于废水中有机物的降解;当臭氧投加量为20 mg/(min·L),对于初始COD为56 mg/L、pH 6.5的实际镀镍漂洗废水,在25 ℃的条件下氧化100min,出水COD降至10mg/L,COD去除率达到82%;在臭氧氧化镀镍漂洗废水的反应中,部分有机物的降解是在Ni2 的催化下由臭氧分解生成氧化能力更强的自由基来完成.臭氧氧化可作为镀镍漂洗废水处理回用的预处理工艺.     

Wasting ways: Perceived distance to the recycling facilities predicts pro-environmental behavior

The present study aims at providing an improved understanding of the environmental factors affecting pro-environmental behavior. To this end, we introduce the economic concept of bounded rationality to the domain of recycling behavior, hypothesizing that the subjective costs of recycling are a better predictor of an individual's tendency to recycle than the objective costs. At the chosen study site, recyclables needed to be disposed of at collection centers distributed throughout the city, allowing for the analysis of recycling-related costs by assessing the distance between participants’ residence and the nearest collection center. Results from an online questionnaire completed by N = 306 citizens indicate that the perceived distance to the recycling facilities is more closely related to recycling behavior than the actual distance. By means of hierarchical regression analyses, we demonstrate that the perceived distance explains unique variance in recycling behavior while the actual distance conveys only redundant information. Surprisingly, the predictive potential of participants’ distance estimates appeared to be significantly larger for recycling behavior than for recycling intention. The implications of our results are discussed with regard to potential opportunities to promote recycling behavior by targeting individuals’ biased perception of recycling-related costs.     

On modelling the global copper mining rates,market supply,copper price and the end of copper reserves

The world supply and turnover of copper was modelled using simple empirical estimates and a COPPER systems dynamics model developed for this study. The model combines mining, trade markets, price mechanisms, population dynamics, use in society and waste as well as recycling, into a whole world system. The degree of sustainability and resource time horizon was estimated using four different methods including (1) burn-off rates, (2) peak discovery early warning, (3) Hubbert's production model, and (4) COPPER, a system dynamics model. The ultimately recoverable reserves (URR) have been estimated using different sources that converge around 2800 million tonne, where about 800 million tonne have already been mined, and 2000 million tonne remain. The different methods independently suggest peak copper mine production in the near future. The model was run for a longer period to cover all systems dynamics and delays. The peak production estimates are in a narrow window in time, from 2031 to 2042, with the best model estimate in 2034, or 21 years from the date of writing. In a longer perspective, taking into account price and recycling, the supply of copper to society is estimated to run out sometime after 2400. The outputs from all models put focus on the importance of copper recycling so that society can become more sustainable with respect to copper supply.     

Packaging glass contained in the heavy residual fraction refused by Portuguese Mechanical and Biological Treatment plants

Mechanical and Biological Treatment (MBT) is an important strategy to manage Municipal Solid Waste (MSW) in Europe. The presence of recyclable materials on MSW depends on different factors such as inefficiencies in the Municipal Solid Waste collecting schemes and to the low level of citizenship environmental education. Among other products, MBT plants produce a residual fraction, named here as heavy residual fraction, that contains a significant amount of packaging glass which in Portugal is currently landfilled. This material is not recycled because it is heavily contaminated with other materials, preventing its processing in Material Recovery Facilities (MRF).In this paper the characterization, including particle size and composition, of the residual fraction of six Portuguese MBT plants is presented. The relevant variables that determine the heavy residual fraction characteristics were identified. It was observed that the MBTr particle size distribution is different and depends mainly on the place on the flowsheet where the MBTr exits the process, which is determined by the type of biological process and by the aperture of the last screen where the product passes through. The content in glass varies from 33 to 83%. These values are mainly related with the upstream glass sorting and with the efficiency of the recovery of the organic fraction which is the glass main contaminant. The second main contaminant is “stones”.The quantity of glass contained in this product in all the plants that will be in operation in Portugal in 2014 was estimated. The work shows that if all the 48,000 of glass could be recovered the Portuguese recycling rate would increase by 4.4%.     

Assessing and improving management practices when planning packaging waste collection systems

Packaging waste collection systems are responsible to collect, within a geographic area, three types of packaging materials (paper, glass and plastic/metal) that are disposed by the final consumer into special bins. Those systems are often characterized by having a network with multiple depots that act as transfer and sorting stations, and where the vehicle fleet is based. However, each depot is often managed independently and not as a part of a unique system. In this work, four current tactical/operational practices that contribute to the independent management of each depot are analysed. The change of such practices is investigated and their impact assessed on the total collection cost. A solution methodology based on mathematical formulations is developed to plan service areas, vehicle routes and vehicle schedules taking into account new alternative solutions in managing the system as a whole. Such methodology is applied to a real case study of a company responsible for the collection of the packaging waste in 7 municipalities in mainland Portugal. New service areas, collection routes and vehicle schedules are defined and significant savings are obtained in terms of the total distance travelled as well as in terms of the number of required vehicles, resulting in a decreasing of the total system cost.     

Design of a European agrochemical plastic packaging waste management scheme—Pilot implementation in Greece

Mismanagement of Agrochemicals Plastic Packaging Waste (APPW) constitutes a major environmental problem, resulting in the pollution of soil, air and water resources and compromising the agricultural products safety, the protection of the environment and the public health. Systems for the management of APPW have been established in some European countries and they are operational for several years now. However, these schemes are incompatible while their operational conditions and technical criteria could be improved. In many countries no schemes exist yet for the management of APPW with serious negative consequences for the environment and public health. In response to these problems the European project AgroChePack has developed an environmental friendly, economically viable European APPW management scheme by transferring know-how from existing schemes, designing a new integrated APPW management scheme and testing it through pilot trials in five countries. This work presents the basic design principles established by AgroChePack by identifying problems and bottlenecks faced by existing schemes in Europe, by developing an integrated APPW scheme and by implementing, evaluating and optimising this scheme through pilot trials in Greece.