Challenges and Opportunities for Creating Intelligent Hazard Alerts: The “FloodHippo” Prototype

Disasters evolving from hazards are a persistent and deadly occurrence in the United States. Despite this, hazard alerts have remained spatially vague, temporally imprecise, and lack actionable information. These deficiencies indicate a divide between the status quo and what is possible given modern environmental models, geographic information systems (GIS), and smartphone capabilities. This work describes an alternative, prototype system, “FloodHippo,” which integrates operational model outputs, cloud‐based GIS, and expanded communication channels to provide personal and interactive disaster alerts for floods. The precepts and methods underpinning FloodHippo apply equally to other disasters that evolve over space and time, presenting the opportunity for a more intelligent disaster response system. The development of such a system would not only minimize current shortcomings in disaster alerts but also improve resilience through individual action, along with community, academic, and federal cooperation.     

氚在黏土矿物等多孔介质中的滞留机制

通过电感耦合等离子体光谱(ICP)、热重(TG)等分析方法对黏土矿物的结构成分、加热特性等进行了检测;通过蒸馏冷凝等实验,实现了对吸附后黏土矿物的吸附水、层间水、结构水的分离,检测了氚在黏土矿物结构内外各类型水中的分布;通过红外吸收光谱(IR)等分析方法对氚在黏土矿物结构中的吸附位置及形态进行了检测研究;通过同位素效应...     

介质材料在可渗透反应墙中的应用进展

可渗透反应墙正发展成为修复污染地下水技术的新方向,其中介质材料是可渗透反应墙成功修复污染地下水的关键。可渗透反应墙介质材料可以细分为还原型、吸附型、沉淀型和降解型介质材料等四类,并分别从不同类型的介质材料的反应机理、应用情况以及存在的问题等方面加以阐述。可渗透反应墙介质材料的选择应在其反应机理的基础上,结合实际的地下水环境条件、污染源、人类活动和经济费用等加以综合考虑,以保证可渗透反应墙长期有效经济安全地运行。     

生物膜对饱和多孔介质渗透性影响的实验和模型研究

为了解微生物生长过程中生物堵塞对二维饱和多孔介质渗透性的影响,采用C190石英砂箱(55 cm×45 cm×1.28 cm)进行室内渗流实验,研究混合菌群KB-1在充足营养源条件下的生长情况及生物膜对饱和多孔介质渗透性的影响.实验监测了砂箱水溶液中悬浮生物量及颗粒表面附着生物量,利用共焦激光扫描技术观测了颗粒表面形成的...     

曝气生物滤池处理生活污水试验

曝气生物滤池具有体积小、处理效率高等特点。研究结果表明,曝气生物滤池处理生活污水在０．５３ｍ／ｈ的水力负荷下,ＢＯＤ５、ＣＯＤ、ＳＳ、ＮＨ４－Ｎ和ＴＮ的平均去除率９５．３％、９２．６％、９６．７％、９１．８５％和８５．１％,平均出水浓度分别为３．０ｍｇ／Ｌ、１２．５ｍｇ／Ｌ、２．５ｍｇ／Ｌ、１．７ｍｇ／Ｌ和４．３ｍｇ／Ｌ。     

低渗透石化污染场地多相抽提修复效率的数值模拟

借助TOUGH3/TMVOC软件对华北地区某典型污染场地进行模型概化,模拟再现了挥发性有机化合物(VOCs)在层状低渗透性介质中的运移和分布特征;同时,设置了不同情景的多相抽提方案,分析了渗透率对多相抽提技术(MPE)去除效率的影响.结果表明,VOCs在该介质中主要以非水相液体(NAPL)相形式存在,且NAPL相饱和度...     

雷管自动装配线上袋式除尘器的设计和研究

以军民两用雷管主要填充物黑索金为研究对象,详细论述了小型低压脉冲袋式除尘器在雷管自动装配线上的应用,及该结构中几个关键点的设计。     

Dissolution behavior of metals from particulate matter emissions

Exposure to air particulate matter (PM) is linked to numerous health effects. In order to improve the understanding of the role of its metallic components, their solubility was examined by using serial short-contact dissolutions totalling 1?h and additional sequential contact periods of 1, 4, and 8 days. The dissolution experiments were performed in solutions containing the main biological electrolytes. ICPMS determinations were used to quantify the dissolved metals. The total compositions were determined after closed vessel microwave digestion. Large variations in the rate and completeness of the dissolutions were observed. Fast and extensive dissolutions within the short-contact time (e.g., Zn, Cd) as well as slow dissolutions persisting during the last contact period (e.g., Ni, Cu, Sb, Pb) were found for smelting emissions. The multi-element determinations also made it possible to identify relationships between dissolution of different metals and define gradual composition changes of residual PM. When comparing with dissolutions performed in de-ionized water, similar major fractions were observed at short-contact time for minor components of smelting or combustion emissions (e.g., V, Ni, Cd), suggesting a preponderance of easily available forms at the surface of the relatively inert particle cores. The use of these time sequential methods may help in (1) modeling metal partitioning in biological media and (2) investigating the causes of adverse effects attributed to air PM.