Composition and source apportionment of dust fall around a natural lake

The aim of this study was to determine the source apportionment of dust fall around Lake Chini, Malaysia. Samples were collected monthly between December 2012 and March2013 at seven sampling stations located around Lake Chini. The samples were filtered to separate the dissolved and undissolved solids. The ionic compositions(NO-3, SO2-4, Cl-and NH+4) were determined using ion chromatography(IC) while major elements(K, Na, Ca and Mg) and trace metals(Zn, Fe, Al, Ni, Mn, Cr, Pb and Cd) were determined using inductively coupled plasma mass spectrometry(ICP-MS). The results showed that the average concentration of total solids around Lake Chini was 93.49 ± 16.16 mg/(m2·day). SO2-4, Na and Zn dominated the dissolved portion of the dust fall. The enrichment factors(EF) revealed that the source of the trace metals and major elements in the rain water was anthropogenic, except for Fe. Hierarchical agglomerative cluster analysis(HACA) classified the seven monitoring stations and 16 variables into five groups and three groups respectively. A coupled receptor model, principal component analysis multiple linear regression(PCA-MLR), revealed that the sources of dust fall in Lake Chini were dominated by agricultural and biomass burning(42%),followed by the earth's crust(28%), sea spray(16%) and a mixture of soil dust and vehicle emissions(14%).     

北京市道路积雪污染及特性研究

通过2009~2012年对北京市区道路旁积雪的取样,分析了积雪中污染物的浓度和特性,并对国内外普遍关注的融雪剂污染问题及其控制进行了初步分析。得出道路积雪中+NH 4-N、TN、TP、COD、SS、Cd等污染物主要来自交通活动,氯化物主要来自氯盐融雪剂;与《地表水环境质量标准》相比,道路积雪中主要污染物为NH+4-N、TN、COD、BOD和氯化物,Cu、Zn、Pb、Cd等重金属的污染水平不高,可达到Ⅴ类水体标准;相同地点近似降水量条件下,积雪中TP、COD、SS的平均浓度高于降雨径流;北京市交通主干道及人行道上喷撒氯盐融雪剂的量高于国外道路,控制其污染主要通过源头减少使用量、使用替代融雪剂、严格融雪剂标准和使用方法、严肃责任追究、加强宣传教育等措施。     

A novel approach for VOC source apportionment combining characteristic factor and pattern recognition technology in a Chinese industrial area

Volatile organic compound (VOC) emission control and source apportionment in small-scale industrial areas have become key topics of air pollution control in China. This study proposed a novel characteristic factor and pattern recognition (CF-PR) model for VOC source apportionment based on the similarity of characteristic factors between sources and receptors. A simulation was carried out in a typical industrial area with the CF-PR model involving simulated receptor samples. Refined and accurate source profiles were constructed through in situ sampling and analysis, covering rubber, chemicals, coating, electronics, plastics, printing, incubation and medical treatment industries. Characteristic factors of n-undecane, styrene, o-xylene and propane were identified. The source apportionment simulation results indicated that the predicted contribution rate was basically consistent with the real contribution rate. Compared to traditional receptor models, this method achieves notable advantages in terms of refinement and timeliness at similar accuracy, which is more suitable for VOC source identification and apportionment in small-scale industrial areas.     

Chemical characterization and source identification of PM2.5 in Luoyang after the clean air actions

Luoyang is a typical heavy industrial city in China, with a coal-dominated energy structure and serious air pollution. Following the implementation of the clean air actions, the physicochemical characteristics and sources of PM_2.5 have changed. A comprehensive study of PM_2.5 was conducted from October 16, 2019 to January 23, 2020 to evaluate the effectiveness of previous control measures and further to provide theory basis for more effective policies in the future. Results showed that the aerosol pollution in Luoyang in autumn and winter is still serious with the average concentration of 91.1 μg/m³, although a large reduction (46.9%) since 2014. With the contribution of nitrate increased from 12.5% to 25.1% and sulfate decreased from 16.7% to 11.2%, aerosol pollution has changed from sulfate-dominate to nitrate-dominate. High NO₃⁻/SO₄²⁻ ratio and the increasing of NO₃⁻/SO₄²⁻ ratio with the aggravation of pollution indicating vehicle exhaust playing an increasingly important role in PM_2.5 pollution in Luoyang, especially in the haze processes. Secondary inorganic ions contributed significantly to the enhancement of PM_2.5 during the pollution period. The high value of Cl⁻/Na⁺ and EC concentration indicate coal combustion in Luoyang is still serious. The top three contributor sources were secondary inorganic aerosols (33.3%), coal combustion (13.6%), and industrial emissions (13.4%). Close-range transport from the western and northeastern directions were more important factors in air pollution in Luoyang during the sampling period. It is necessary to strengthen the control of coal combustion and reduce vehicle emissions in future policies.     

Identification and characterization of Fe3O4/peroxodisulfate advanced oxidation products from sulfameter

Sulfonamides (SAs) are one of the most widely used antibiotics and their residuals in the environment could cause some negative environmental issues. Advanced oxidation such as Fenton-like reaction has been widely applied in the treatment of SAs polluted water. Degradation rates of 95%-99.7% were achieved in this work for the tested 8 SAs, including sulfisomidine, sulfameter (SME), phthalylsulfathiazole, sulfamethoxypyridazine, sulfamonomethoxine, sulfisoxazole, sulfachloropyridazine, and sulfadimethoxine, in the Fe₃O₄/peroxodisulfate (PDS) oxidation system after the optimization of PDS concentration and pH. Meanwhile, it was found that a lot of unknown oxidation products were formed, which brought up the uncertainty of health risks to the environment, and the identification of these unknown products was critical. Therefore, SME was selected as the model compound, from which the oxidation products were never elucidated, to identify these intermediates/products. With liquid chromatography-high resolution tandem mass spectrometry (LC-HRMS/MS), 10 new products were identified, in which 2-amino-5-methoxypyrimidine (AMP) was confirmed by its standard. The investigation of the oxidation process of SME indicated that most of the products were not stable and the degradation pathways were very complicated as multiple reactions, such as oxidation of the amino group, SO₂ extrusion, and potential cross-reaction occurred simultaneously. Though most of the products were not verified due to the lack of standards, our results could be helpful in the evaluation of the treatment performance of SAs containing wastewater.     

Year-round observation of atmospheric inorganic aerosols in urban Beijing: Size distribution, source analysis, and reduction mechanism

To investigate particle characteristics and find an effective measure to control severe particle pollution, year-round observation of size-segregated inorganic aerosols was conducted in Beijing from January to December, 2016. The sampled atmospheric particles all presented bimodal size distribution at four pollution levels (clear, slight pollution, moderate pollution and severe pollution), and peak values appeared at the size range of 0.7-2.1 μm and >9.0 μm, respectively. As dominant particle compositions, NO₃⁻, SO₄²⁻, and NH₄⁺ in four pollution levels all showed significant peaks in fine mode, especially at the size range of 1.1-2.1 μm. Secondary inorganic aerosols accounted for about 67.6% (36.3% (secondary sulfates) + 31.3% (secondary nitrates)) of the total sources of fine particles in urban Beijing. Severe pollution of fine particles was mainly caused by the air masses transported from nearby western and southern areas, which are industrial and densely populated region, respectively. Sensitivity tests further revealed that the control measures focusing on ammonium emission reduction was the most effective for particle pollution mitigation, and fine particles all showed nonlinear responses after reducing ammonium, nitrate, and sulfate concentrations, with the fitting curves of y = -120.8x - 306.1x² + 290.2x³, y = -43.5x - 67.8x², and y = -25.8x - 110.4x² + 7.6x³, respectively (y and x present fine particle mass variation (μg/m³) and concentration reduction ratio (CRR)/100 (dimensionless)). Overall, our study presents useful information for understanding the characteristics of atmospheric inorganic aerosols in urban Beijing, as well as offers policy makers with effective measure for mitigating particle pollution.     

Identification of unknown disinfection byproducts in drinking water produced from Taihu Lake source water

Although disinfection byproducts(DBPs) in drinking water have been suggested as a cancer causing factor, the causative compounds have not yet been clarified. In this study, we used liquid chromatography quadrupole-time-of-flight spectrometry(LC-QTOF MS) to identify the unknown disinfection byproducts(DBPs) in drinking water produced from Taihu Lake source water, which is known as a convergence point for the anthropogenic pollutants discharged from intensive industrial activities in the surroundi...     

Effect of air masses motion on the rapid change of aerosols in marine atmosphere

The impact of air masses motion on marine aerosol properties was investigated using an on-board single particle mass spectrometer(SPAMS) deployed for the determination of single particle size resolved chemical composition over Southeast China Sea. Two aerosol blooms(E1 and E2) were observed during the cruise. High average particle number count occurred in E1(7320), followed by E2(5850), which was more than 100–150 times of the average particle number count during normal periods. Particles were classified as four major sources, including continental source, shipping source, marine source, and transport source based on the mass spectral similarity. Transport source was identified as those particles with high particle number count occurred only during aerosol bloom period. Three sub-types of EC-Ca, OC-Ca, and Al-rich were classified as transport source.EC-Ca was the dominant particles of the transport source, accounting for more than 70%of the total particles in aerosol bloom events. A uni-modal size distribution in the size range of 0.1–2.0 μm was observed during normal period, while a bimodal distribution with a tiny mode(0.3 μm) and a coarse mode between 0.4 and 0.6 μm was present during aerosol bloom. The variation of aerosol source is consistent with air masses back trajectories, for the reason that most of the long-range air trajectories are from the ocean,while short air trajectories originate in the continental regions, which means that air masses have a significant impact on the aerosol physical–chemical properties along their tracks.     

Seismological aspects of the Japan Sea earthquake of 1983

The Japan Sea earthquake of 1983 took place at the eastern margin of the Japan Sea, which is a marginal sea situated west of the island are of Japan and the Japan trench in the Pacific Ocean. Its magnitude of 7.7 is the largest among earthquakes which have been known to occur in the seismic belt along the Japan Sea coast of Northeast Honshu, Japan. Since the seismic activity in the belt is not so high, the earthquake is especially important in the geophysical interpretation of tectonic process in the region. The aftershock distribution and the focal mechanism reveals that the earthquake is a thrust fault on a plane dipping eastwards by about 30°. The waveform analysis shows that the earthquake can be regarded as a double shock to a first approximation. Interestingly, there was a 10-second intermission between the two events. These are preliminary results, and more detailed studies are under development.