基于农户层次的陕北黄土丘陵区农业生态经济系统耦合关系研究

农业生态经济系统耦合是一个复杂的过程,是潜变量与潜变量、潜变量与可测变量及可测变量之间相互作用的结果,结构方程模型的建立很好地描述了这一复杂关系。通过对吴起县、安塞县和宝塔区共建的中尺度生态农业建设试验示范区、米脂县等3个典型区域所代表的黄土丘陵区及其各个区域农业生态经济系统结构方程模型的建立与运算,结果表明:在"退耕还林还草工程"等外力作用下,农业生态经济系统运行模式基本揭示了农业产业与农业资源相互耦合这一本质规律,但现状耦合模式并未充分利用农业资源,系统耦合效果较低。农业产业与农业资源对系统耦合的影响系数分别为0.54和0.16,农业产业和农业资源之间的相关系数只有0.28,即农业资源没有很好地支撑产业的发展,导致农业生态经济系统耦合效果不明显,存在着局部相悖的态势,潜伏了林草资源与其相关产业链网缺失现象。为此,需要强化农业产业与农业资源的互动过程,特别要发展林草及其相关产业,促进林草资源的有效利用,促使系统耦合效果的不断提高,增加经济效益。     

Modelling sulphate-enhanced cadmium uptake by Zea mays from nutrient solution under conditions of constant free Cd2+ ion activity

A controlled hydroponic experiment was undertaken to investigate Cd uptake in relation to the activity of Cd species in solution other than the free ion (Cd²⁺) by maintaining a constant Cd²⁺ activity under variable SO₄₂⁻ and Cl⁻ concentrations exposed to maize (Zea mays var. Cameron) plants. The objectives of these experiments were: (1) to distinguish and quantify the different uptake rates of free and inorganic-complexed Cd from nutrient solution, and (2) to model the uptake of Cd by maize with a Biotic Ligand Model (BLM) in a system which facilitates the close examination of root characteristics. Results of the current experiments suggest that, in addition to the free ion, CdSO₄⁰ complexes are important factors in determining Cd uptake in nutrient solution by maize plants. Higher nominal SO₄²⁻ concentrations in solution generally resulted in a greater Cd accumulation by maize plants than predicted by the Cd²⁺ activity. A better integration of the complete dataset for the 3 harvest times (6, 9 and 11 days after treatment) was achieved by including consideration of both the duration of Cd exposure and especially the root surface area to express Cd uptake. Similarly, the fit of the BLM was also improved when taking into account exposure time and expressing uptake in terms of root morphological parameters.     

不同磷源形态对中肋骨条藻和东海原甲藻生长及磷酸酶活性的影响

研究了磷酸二氢钠（NaH₂PO₄）、三磷酸腺苷二钠盐（adenosine disodium triphosphate,ATP）、 6-磷酸葡萄糖（glucose 6-phosphate,G-6-P）和β-甘油磷酸钠（sodium β-glycerophosphate,G-P）对中肋骨条藻 （Skeletonema costatum）和东海原甲藻（Prorocentrum donghaiense）的生长以及磷酸酶活性的影响.结果发现,中肋骨条藻和东海原甲藻均既可利用无机磷酸盐又能利用有机磷化合物生长繁殖,且有机磷化合物的作用比无机磷酸盐的作用稍高.对于中肋骨条藻, 8 d后的细胞密度分别为48×10⁴（NaH₂PO₄）、 73×10⁴（ATP）、 63×10⁴（G-6-P）和54×10⁴（G-P）cells/mL;对于东海原甲藻, 10 d后4种磷源形态下的细胞密度分别为8.7×10⁴、 15.5×10⁴、 12.4×10⁴和9.5×10⁴ cells/mL. 2种藻在4种形态磷源下的磷酸酶活性在前3～4 d均呈下降趋势,而后变化不同.以NaH₂PO₄为磷源的处理组, 2种藻的碱性磷酸酶（alkaline phosphatase,AP）和酸性磷酸酶（acid phosphatase,AcP）活性均呈现升高趋势;3种有机磷处理组比较,对于中肋骨条藻,ATP和G-6-P为磷源的处理组酶活性较低且AP活性无明显变化趋势,AcP活性在试验后期呈微弱的升高趋势,以G-P为磷源的处理组酶活性最高且有升高趋势,至第8 d时,以ATP、G-6-P和G-P为磷源处理组的AP活性分别为0.004×10^-5、 0.014×10^-5和0.029×10^-5 U/cell,AcP活性分别为0.006×10^-5、 0.011×10^-5和0.018×10^-5 U/cell,对于东海原甲藻,酶活性变化趋势与中肋骨条藻相同,至第10 d时, 3种磷源处理组的AP和AcP活性顺序也为ATP相似文献   

城市污水中的生物毒性及其臭氧削减效果研究

分别利用酵母双杂交和umu试验对5个城市9个污水处理厂进出水中生物遗传毒性和视黄酸受体(BAR)结合活性进行了调查.并考察了臭氧氧化对这两种生物效应的去除效果.结果表明,城市污水中存在不同程度的生物遗传毒性和视黄酸受体(RAR)结合活性,通过生物处理可以大幅削减污水中的RAR结合活性和生物遗传毒性,但污水厂出水中仍然普遍具有遗传毒性,部分残留RAR结合活性.5～10mg·L-1的臭氧可以有效削减二级出水中残留的BAR结合活性和遗传毒性,是一种有效的提高水质安全性的污水深度处理技术.     

全程高温好氧堆肥快速降解城市生活垃圾

为了提高堆肥处理城市生活垃圾（MSW）的速率和质量,设计了一种外加热源的全程高温好氧堆肥工艺.实验以全程高温好氧堆肥和传统好氧堆肥两种方法对MSW进行了60d的堆肥处理.同时,监测了堆肥的pH和温度等参数的变化情况,并以C/N、种子发芽率(GI)、可溶性有机碳(DOC)、比好氧速率(SOUR)和脱氢酶（DH-ase）活性为指标评价了堆肥的腐熟度和质量.结果表明,全程高温堆肥法和传统堆肥法的堆肥周期分别为16d和28d,两种方法得到的产品其pH值均在7左右.在第31d将全程高温堆肥产品置于30℃恒温箱时,其理化性质没有出现明显波动,说明其堆肥产品性质稳定.因此,全程高温好氧堆肥法能明显缩短堆肥周期、提高堆肥质量,具有很大的应用潜力.     

一种测定活性污泥中高等微生物活性的方法

采用机械破碎方式灭活活性污泥中高等微生物,并通过测定破碎前后泥样耗氧速率(OUR)之差别间接计算高等微生物的活性作用.实验结果表明,以分散机破碎活性污泥,高等微生物均可被有效地破碎灭活,且再培养138h后不再恢复.与此同时,对酵母菌破碎实验显示,机械破碎并未对其数量、形态以及活性产生太大影响,这表明机械破碎亦不会对个体尺寸比酵母菌更小的细菌构成任何影响.为使破碎前后活性污泥絮凝体形态基本一致,将破碎后的泥样经离心处理,以尽可能使絮凝体恢复如初(以SVI衡量).通过比较破碎前后泥样的OUR并计算可知,高等微生物活性相对于活性污泥总活性约占12%～14%.     

Evaluation of ecological restoration success in mining‐degraded lands

This review article analyzes the importance of assessing the success of ecological restoration by using four indicators: assemblage of the plant and animal communities; enzyme activity; litter accumulation and decomposition; and the improvement of soil quality. These indicators can be used alone or in combinations. Even though the Society for Ecological Restoration International provided a primer containing nine attributes to use as standards for measuring ecological restoration, only three of these attributes could be easily applied due to their low costs and low time requirements. These three attributes include: diversity, vegetation structure, and ecological processes. This review article emphasizes that the criteria for the selection of the indicator species should be based upon: habitat types, abundance of species, ease of measuring, quantifying and interpreting the results, gradual enhancement with time and cost‐effectiveness, sensitivity, variability of response, size, residential status, and requirements of the area. Principal component analysis was applied to calculate the reclaimed mine soil quality index (RMSQI) and the forest soil quality index (FSQI) and the RMSQI value was compared with FSQI (optimum index value of reference ecosystem) to evaluate the restoration success. Available phosphorus, exchangeable magnesium, organic carbon, clay content, field moisture, available nitrogen, electrical conductivity, and pH are identified as the most influential parameters that regulate the health of reclaimed mine soil. Exchangeable calcium, magnesium, cation exchange capacity, sand, silt, clay content, field moisture, available phosphorus, and pH are the controlling properties for forest soil. The observed values of the above‐stated soil indicator properties were converted into a unitless score (0–1.00) and integrated into index calculations (RMSQI and FSQI). The contribution of each soil indicator properties on the calculated index was analyzed, which provides insight into the reason for the measured index. A higher RMSQI indicates better ecological restoration success. The calculated RMSQI was found to be 0.473 in the reclaimed dump, which is 6% lower than the reference ecosystem.     

Performance of a diesel engine with water emulsified diesel prepared with optimized process parameters

An attempt has been made to produce stable water–diesel emulsion with optimal formulation and process parameters and to evaluate the performance and emission characteristics of diesel engine using this stable water–diesel emulsion. A total of 54 samples were prepared with varying water/diesel ratio, surfactant amount and stirring speed and water separation was recorded after 24 and 48 hr of emulsification. The recorded data were used in artificial neural network (ANN)-particle swarm optimization (PSO) technique to find the optimal parameters to produce water–diesel emulsion for engine testing. The predicted optimal parameters were found as 20% water to diesel ratio, 0.9% surfactant and 2200 rpm of stirrer for a water separation of 14.33% in one day with a variation of 6.54% against the actual value of water separation. Water–diesel emulsion fuel exhibited similar fuel properties as base fuel. The peak cylinder gas pressure, peak pressure rise rate and peak heat release rate for water–diesel were found higher as compared to diesel at medium to full engine loads. The improved air-fuel mixing in water–diesel emulsion enhanced brake thermal efficiency (BTE) of engine. The absorption of heat by water droplets present in water–diesel emulsion led to reduced exhaust gas temperature (EGT). With water–diesel emulsion fuel, the mean carbon monoxide (CO), unburned hydrocarbon and oxides of nitrogen (NO_x) emissions reduced by 8.80, 39.60, and 26.11%, respectively as compared to diesel.     

焦化废水中不同极性组分的光谱分析及可生物降解特性

焦化废水是典型难降解工业有机废水,构成其成分的复杂及种类的繁多使其难以实现高效的生物降解过程,制约了水处理的水质达标.为了探明其中生物降解强抑制组分,采用DAX-8大孔树脂将焦化废水分离出疏水酸性组分(HOA)、疏水碱性组分(HOB)、疏水中性组分(HON)和亲水性组分(HIS)等4种极性不同的组分,分析了各组分的有机物含量分布,紫外吸收光谱和三维荧光光谱,并用两种方法考察了各组分的可生物降解性能.结果表明,HOA是主要的有机组分,其COD和TOC分别占比55.9%和56.8%;HOA也是主要的芳香物质及荧光组分,而HON是芳香构造化程度最高和类腐殖质占比P(Ⅲ+Ⅴ)最高的组分;各组分的BOD5/COD值及脱氢酶活性的抑制结果显示其难降解程度依次为HONHOBHIS原水HOA,而HON是焦化废水中生物抑制最强组分,其BOD5/COD值仅为0.21±0.02,对脱氢酶活性的抑制达到38.5%;SUVA和P(Ⅲ+Ⅴ)与可生物降解性的关联分析发现,焦化废水中难降解组分并不都是芳香性化合物造成的,类腐殖质对其中难降解有机组分的指示作用相比SUVA更加灵敏.