Fenton氧化在废水处理中的应用

综述了近年来Fenton氧化在废水处理领域的应用状况,对Fenton试剂氧化的机理和主要影响因素:温度、pH、反应时间、H2O2和Fe2+的投加量、H2O2/Fe2+量比以及反应动力学模型进行了简要介绍.最后探讨了Fenton氧化技术在废水处理领域现存不足之处及今后的发展趋势.     

工业废水中钡的排放限值研究

在查阅大量文献资料基础上,总结了环境中钡的来源和特性,采用电感耦合等离子原子发射光谱方法测定地表水及稀土废水中的钡元素含量.对仪器的工作参数和被测元素的分析谱线进行了优化和选择,结合钡的化学毒性,提出了废水中钡的标准是5mg/L的建议.     

“十二五”地表水国家环境监测网络吉林省水环境国控监测点位布设的构想

根据国家环境质量监测网络,对“十二五”地表水环境质量监测断面调整工作要求,吉林省在辖区内所有水环境质量监测断面及采样点基础上,完成了松花江流域和辽河流域国控监测断面的优化调整工作。在此过程中,如何从国家尺度上,既能充分反映吉林省水环境质量状况,又能满足国家对地表水环境管理需求进行了深入思考。本文以吉林省为例,在确定国控监测断面及采样点的布设中．提出了自己的构想和建议。     

环境管理过程中对锅炉型号的识别

通过对锅炉型号的简要介绍,提高对锅炉的认识,增强在污染源动态更新调查表的填报过程中锅炉技术指标的填报能力是十分必要的。     

FRP加固震损RC柱建模方法及骨架模型研究

为研究震损RC柱采用FRP(Fiber Reinforced Polymer,FRP)加固修复后的抗震性能,本文基于OpenSees仿真平台,根据震后RC柱的表观损伤状态提出FRP加固震损RC柱的有限元模型建立方法。对FRP加固震损RC柱进行5120种工况的Pushover分析,采用三折线荷载-位移骨架曲线,研究损伤状态对骨架曲线特征点参数的影响规律,并通过数据回归分析提出FRP加固震损RC柱的骨架曲线计算模型。分析结果表明:损伤会降低FRP加固RC柱的承载力及刚度,且降低程度随损伤指数的增大而增加,两者近似成抛物线关系;在DS-5损伤状态下,相比于FRP加固完好RC柱,FRP加固震损RC柱的屈服承载力P y、峰值承载力P c、弹性刚度K 1、弹塑性刚度K 2及下降段刚度K 3的均值下降17.9%、14.5%、41.8%、43.1%和19.9%;损伤对FRP加固RC柱弹性刚度和弹塑性刚度的降低程度明显高于屈服承载力和峰值承载力;文中提出的FRP加固震损RC柱骨架曲线计算模型具有较高精度。     

Evaluation of accuracy of linear regression models in predicting urban stormwater discharge characteristics

Stormwater runoff has been identified as a source of pollution for the environment, especially for receiving waters. In order to quantify and manage the impacts of stormwater runoff on the environment, predictive models and mathematical models have been developed. Predictive tools such as regression models have been widely used to predict stormwater discharge characteristics. Storm event characteristics, such as antecedent dry days （ADD）, have been related to response variables, such as pollutant loads and concentrations. However it has been a controversial issue among many studies to consider ADD as an important variable in predicting stormwater discharge characteristics. In this study, we examined the accuracy of general linear regression models in predicting discharge characteristics of roadway runoff. A total of 17 storm events were monitored in two highway segments, located in Gwangju, Korea. Data from the monitoring were used to calibrate United States Environmental Protection Agency＇s Storm Water Management Model （SWMM）. The calibrated SWMM was simulated for 55 storm events, and the results of total suspended solid （TSS） discharge loads and event mean concentrations （EMC） were extracted. From these data, linear regression models were developed. R2 and p-values of the regression of ADD for both TSS loads and EMCs were investigated. Results showed that pollutant loads were better predicted than pollutant EMC in the multiple regression models. Regression may not provide the true effect of site-specific characteristics, due to uncertainty in the data.     

AERMOD与估算模式在环境影响评价中的应用与比较

采用AERMOD和估算模式两种预测模式对同一生活垃圾填埋场进行了预测。比较两种预测结果可以看出,在污染源、预测范围、运行周期相同的情况下,敏感点处的落地浓度均与排放源强呈正比,与距离呈反比。预测结果同时说明,估算模式是一种保守的预测模式,其预测结果比AERMOD模式大,可作为进一步预测模式的有效补充。     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

基于Tripod Beta事故模型的触电事故原因分析

应用Tripod Beta事故模型对某厂触电事故进行了深入分析,得到了事故原因,并提出预防类似事故的建议措施。     

燃煤电厂锅炉PM2.5排放危害度评价模型建立及案例分析

为评价燃煤电厂锅炉PM2.5排放的危害度,根据颗粒的形成机制及对环境和人体健康的影响程度,将PM2.5进行了粒径分段,综合考虑不同粒径段颗粒物的质量浓度、粒数浓度、汞相对富集因子及汞元素在煤灰分中含量,建立了燃煤锅炉PM2.5排放危害度综合评价模型,最后利用已有文献现场实验测得的数据对评价模型进行了案例分析,并提出了危害度削减系数概念,可用于对除尘装置进行评价.