深圳湾流域面源与截排溢流污染特征及其对水环境的影响

随着点源污染逐步得到有效控制,面源与截排溢流污染对水环境的胁迫日益突出。基于土地遥感数据、城市排水管网等资料,构建流域—海湾一体化水环境模型,探讨深圳湾流域面源与截排溢流污染特征及其对水环境的影响,研究表明:(1)雨季COD、NH3-N和TP单位面积面源与截排溢流污染负荷分别为17.21 t/km2与10.21 t/km2、0.17 t/km2与0.69 t/km2、0.04 t/km2与0.07 t/km2;(2)面源与截排溢流污染时间上主要集中于大雨及以上等级降水较多的5月和8月,空间上主要分布在截排工程集中、下垫面面积较大且坡度较陡的深圳河、大沙河和新洲河流域;(3)面源与截排溢流水体COD、NH3-N和TP浓度可达地表水V类标准的3.7倍、18.2倍和8.5倍;(4)雨季COD、NH3-N和TP浓度高于旱季的区域分别超过深圳湾总面积的40%、60%和65%。     

应用DNDC模型估算区域农业土壤N2O释放通量和释放量——以贵州省为例

根据ＤＮＤＣ模型能较好地拟合贵州省玉米－油菜轮作田、大豆－冬小麦轮作田和休耕地的N₂O释放通量及其影响因子的季节变化模式,采用ＤＮＤＣ模型估算了以县为空间分辨尺度的贵州省农业土壤１９９５ 年N₂O释放通量和释放量;定量评估了施肥和耕作农业活动对该地区N₂O释放量的贡献． 本工作将为准确估算我国农业土壤的N₂O释放量和提出科学的减排措施提供研究基础和方法参考．     

Dynamic fate modeling of γ-hexachlorocyclohexane in the lower reaches of the Liao River

A QWASI model dependent on temperature is parameterized to describe the long-term fate of persistent organic pollutants (POPs) in the Liao River. The model parameters, namely fugacity capacity, degradation rate, and transfer coefficient, are profoundly affected by temperature. This model is used to simulate the fate of γ-hexachlorocyclohexane (γ-HCH) in the lower reaches of the Liao River from 1998 to 2008. Modeling results show that γ-HCH fugacity capacities in air, water, and sediment increase as temperature decreases, and the transfer and transformation rate coefficients increase as temperature increases. The variations of transfer and transformation parameter D values depend on fugacity capacities, and transfer and transformation coefficients simultaneously. The performance of the model is evaluated by comparing the predicted and observed concentrations in the water and sediment of the Liao River. The predicted values agree well with the observed value in the order of magnitude, in most cases within the factor of 3. It is believed that the model is appropriate for simulating the long term fate of POPs in the Liao River. Translated from Environmental Science, 2006, 27(1): 121–125 [译自: 环境科学]     

The aggregation pheromone ofIps duplicatus and its role in competitive interactions withI. typographus (Coleoptera: Scolytidae)

Summary Ips duplicatus withI. typographus co-inhabiting Norway spruce (Picea abies (L.) Karst.) would benefit from a pheromone blend distinct from that of the larger competitorI. typographus. GC-MS analysis showed thatI. duplicatus males feeding in the host produced ipsdienol (Id),cis-verbenol (cV),trans-verbenol (tV), myrtenol (Mt), andE-myrcenol (EM) and traces of 2-methyl-3-buten-2-ol (MB).I. duplicatus produced Id in approximately racemic form (48.9-54.5% (+)-(S)-isomer). The amounts of Id and EM released over a 9 day period had a maximum of 250 and 5 ng/h/male, respectively, on day 2. Exposure ofI. duplicatus males to myrcene and -pinene resulted in the production of small amounts of Id, cV, tV, Mt, andtrans-pinocarveol, but not of EM. In laboratory bioassays with walking beetles, the pheromone component Id alone was weakly attractive while EM was inactive, but in binary combination with Id strongly synergized attraction. A combination of EM and Id at a release rate equivalent to 100–200 males was more attractive in the field than 70 unmated males in a spruce log. The addition of myrcene ( a suggested pheromone precursor of Id) to Id did not enhance trap caches, while addition of EM increased catches > 10-fold. Subtracting EM from a blend of Id, EM, cV and MB drastically reduced trap catches while subtraction of cV or MB or both had no significant effect. Addition of EM over a wide concentration range to the synthetic pheromone ofI. typographus did not reduce the attraction of females of this species in the laboratory. A two-species pheromone interaction field test releasingI. typographus pheromone components (MB + cV) at 10–1000 male equivalents (ME) andI. duplicatus pheromone (Id + EM) at 0, 10–1000 ME in all possible combinations showed both positive intraspecific dose-response effects and an interspecific inhibition. Higher release rates of EM appeared to inhibitI. typographus, especially males. In a tree colonization model, the response of the two competing species to their respective pheromones show a good separation during the mass-attack with a small initial cross-attraction. It remains to be shown whether either of the two pheromone systems have in fact evolved in the present sympatry, or if they are an incidental effect of ancestry of these phylogenetically distantIps.     

包装行业中的变频器矢量控制技术

为了更好地解决包装行业中电力拖动设备的机械性能和调速问题,选用了矢量控制型变频器．介绍了变频器矢量控制的基本原理,并且建立了异步电动机在不同坐标系下的数学模型．最后采用磁场定向控制方法,导出了异步电动机的矢量控制数学模型,方便了变频器矢量控制的实现．图1,参4．     

流域系统动力学模型的全耦合问题研究进展

从系统分析的视角出发,对流域系统动力学建模过程、方法进行总结。综述了国内外系统动力学模型(简称SD模型)在社会经济发展与流域水资源承载力、流域水环境承载和流域水生态承载力耦合关系的研究。从简单的零维模型发展到复杂的社会经济综合模型和OO-SD模型(即Objective-Optimization SD模型),国内SD模型耦合关系研究主要集中在叶尔羌河、洱海、滇池等流域,SD模型在监测、数据共享和模型结构、参数选取和不确定性分析等方面还存在不足,有待改进。     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

A MODELING APPROACH FOR OPTIMUM SEDIMENT DETENTION POND DESIGN1

ABSTRACT: A design procedure to determine optimum size for a sediment detention pond is presented. The procedure is based on simulating the sediment removal efficiency of the pond in conjunction with temporal variations in rainfall and potential land use and/or management options. The simulation procedure is based on a combined probabilistic-deterministic modeling approach. The probabilistic model generates daily rainfall with hourly increments for a selected site. The deterministic model simulates sediment yield and concentration for drainage area (pond inflow) and sediment trapping efficiency of the pond. The sediment yield and concentration in pond effluent is estimated from the difference between sediment inflow to the pond and sediment trapped by the pond. As an example, the procedure is applied to determine optimum design for a sediment detention pond in a surface mined area using several pond design options and alternative mining operation/land reclamation strategies.     

均质滤料过滤截污模型研究

对均质滤料过滤进行了分析，采用毛细管模型研究过滤水流，给出毛细管中剪切应力的分布，通过毛细管中颗粒物的受力分析，求得颗粒与毛细管壁间的物理化学作用力。对颗粒在毛细管在毛细管中运动的受力平衡进行分析简化，得到了截污饮和时滤床中孔隙率的计算公式，由此可以计算出均质滤床的最大截污能力，即：清洁滤床的孔隙率与孢和孔隙率之差乘以滤床的体积。     

固定化微生物吸附剂对Cr3+的吸附特性研究

从皮革铬鞣、复鞣污泥等处分离、纯化出4株菌株TP、XB、MY和TQ,采用海藻酸钠悬滴法并添加膨润土制成微生物固定化吸附剂,研究该吸附剂对低质量浓度Cr3+的吸附特性。结果表明,4种固定化颗粒对低质量浓度Cr3+有较好的吸附作用。实验室条件下,当吸附温度为30℃时,6 h后固定化吸附剂进入缓慢吸附和平衡吸附阶段。吸附等温曲线拟合研究表明,不同温度下吸附剂适合不同的等温模型。4种微生物吸附剂均与Lagrange拟二级动力学模型拟合最佳,且吸附量从高到低为TQ、TP、XB、MY。颗粒内扩散模型研究表明,20℃下XB和MY对Cr3+的吸附分为快速吸附和缓慢吸附阶段;30℃和40℃下固定化颗粒均呈现表面吸附—缓慢吸附—平衡吸附过程。热力学研究表明,吸附反应均属于自发进行的吸热过程,并且均是化学吸附。