燃煤电厂电-袋复合式除尘器优化控制的仿真运行研究

以电-袋复合式除尘器为仿真研究对象,在Windows界面下利用Visual Basic6．0编程语言开发出燃煤电厂电-袋复合式除尘器优化控制的仿真运行软件。该软件通过建立数学模型,进行仿真实验,模拟工况变化、优化运行参数等对电-袋复合除尘系统进行整体的优化控制,并综合分析电-袋复合除尘器运行过程中的能耗以及运行费用,对运行电压、电流、运行阻力、喷吹周期等参数进行了优化。该仿真软件达到了电一袋除尘系统的节能降耗的目的,同时也降低了电～袋复合除尘器的运行成本。     

FeⅡ(EDTA)络合协同RDB去除NO废气效能及过程分析

为进一步提高一氧化氮(NO)的去除效率,在新型生物转鼓反应器(rotating drum biofilter,RDB)中,以FeⅡ(EDTA)络合协同RDB生物转鼓的耦合技术强化难水溶性NO的气液传质速率,提高生物还原效能为目标进行了研究.结果表明,适量FeⅡ(EDTA)被添加到RDB底部营养液后,能迅速吸收气相中的NO并生成FeⅡ(EDTA)-NO络合物,进而可通过反硝化实现同步脱氮和络合剂再生.在转速0.5 r.min-1、空床停留时间(EBRT)57.7 s、温度30℃、pH 7～8的实验条件下,RDB的净化效能随络合剂的投加而显著改善;FeⅡ(EDTA)质量浓度从0增至500 mg.L-1后,NO去除率从61.1%提高到97.6%,去除负荷从16.2 g.(m3.h)-1上升到26.7 g.(m3.h)-1.分析了FeⅡ(EDTA)络合协同净化NO的反应过程,建立了NO净化效率与FeⅡ(EDTA)添加浓度的关联方程,可较好地拟合实验数据.     

区域空气质量模拟中查表法的应用研究

在自行开发完善的区域空气质量模式系统RegSRRMS中应用查表法,模拟中国典型城市群对流层大气主要污染物的浓度变化,评估该方法在大气复合污染事件预测和控制中的有效性.首先,利用具有国际先进水平的空气质量模式WRF-CHEM中的化学模块建立了包含完善气相化学、气溶胶过程的箱模式WRFBOX.其次,利用WRFBOX进行化学反应敏感性分析,基于影响污染物的重要因子分别建立了臭氧(O3)及其前体物、无机盐气溶胶和二次有机气溶胶(SOA)查算表数据库,并检验其有效性.最后,将此查算表数据库引入RegSRRMS,建立简化的查表算法.利用直接耦合机制法和查表法对2000年3月珠三角地区污染个例中主要大气污染物浓度进行模拟.通过比较2种方法的模拟结果,显示查表法计算效率提高了57%,能够反映大气光化学反应的非线性特征、气溶胶及其前体物的平衡关系,具有高分辨率、高时效性,能够方便快捷地给出源和受体之间的响应关系,结果可靠.在区域空气质量模式中应用查表法有利于大气污染事件的快速预测以及大气污染控制的快速决策.     

Fe/Al改性膨润土对铬酸根的吸附性能研究

利用膨润土原矿提取了粒径小于2μm的膨润土胶体,经过钠质化处理后分别用聚羟基铁和聚羟基铝进行改性,然后用一次平衡法研究了改性膨润土对水体中铬酸根的吸附性能.结果表明,与原矿相比,改性膨润土对铬酸根的吸附量有了不同程度的提高,铁改性膨润土对铬酸根的吸附量大于铝改性者.CrO42-的吸附平衡浓度为0.5 mmol·L-1时,Mt-1(Fe)、Mt-2(Fe)和Mt-3(Al)对铬酸根的吸附量分别为271.0 mmol·kg-1、114.0 mmol·kg-1和16.1 mmol·kg-1.改性膨润土对铬酸根的吸附量随离子强度的增加而增大,随体系pH值的增加而减小.铬酸根在改性膨润土表面的吸附以专性吸附机制为主,静电吸附所占比例很小,一般不超过30%.这些研究结果可为开发新型水处理剂提供理论指导.     

水钠锰矿的Mn（Ⅲ）分布及Na4P2O7溶液处理对其铅吸附性能的影响

以深入理解水钠锰矿结构中低价锰离子的含量及分布对其铅吸附性能的影响为目的,通过不同pH（pH为2、4、5）的焦磷酸钠溶液络合浸提酸性水钠锰矿结构中的Mn（Ⅱ）和Mn（Ⅲ）,研究了浸提锰离子的形态、含量、矿物的锰平均氧化度和Pb2＋的吸附量及其伴随Mn2＋、H＋释放量的变化.结果表明,锰平均氧化度为3.670的酸性水钠锰...     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

Efficacy of natural biocide on control of microbial induced corrosion in oil pipelines mediated by Desulfovibrio vulgaris and Desulfovibrio gigas

We compared the efficacy of a natural biocide with four chemical tetrakishydroxymethyl phosphonium sulfonate, benzyl trimethyl ammonium chloride, and formaldehyde, glutaraldehyde, to control microbial induced corrosion in oil pipelines. The efficacy of biocides were monitored against Desulfovibrio vulgaris and Desulfovibrio gigas in experimental pipes by measuring cell counts, H2S production, Fe(II) production, production of extracellular polymeric substances and structure of biofilm. The treatment with cow urine had minimum planktonic cell counts of 3 102 CFU/mL as well as biofilm cell counts of 9 101 CFU/mL as compared with tetrakishydroxyl methyl phosphonium sulfonate, benzyl trimethyl ammonium chloride, formaldehyde and glutaraldehyde. Sulfide production was the lowest with cow urine (0.08 mmol/L), followed by tetrakishydroxymethyl phosphonium sulfonate 0.72 mmol/L. On day 90 of treatment, Fe(II) production was also found to be the lowest with cow urine. The scanning electron microscopic studies indicated that the biofilm bacteria were killed by cow urine. These results demonstrate the cow urine mediated control of microbially induced corrosion, and this is indicative of its potential as a viable substitute of toxic biocides. To the best of our knowledge, this seems to be the first report which screens possible biocidal activity by cow urine as compared to the most common biocides which oil industry is currently using.     

La-Co-Fe-Cu/HZSM-5在尾气碳颗粒燃烧中的催化性能

采用柠檬酸络合低温浸渍法制备分子筛负载钙钛矿型复合氧化物催化剂。采用XRD、SEM和H2-TPR等手段对催化剂性能进行表征,并在微型固定床反应器中对催化剂进行活性评价。结果表明,在钙钛矿型复合氧化物中进行B位离子掺杂,可以改善催化活性,碳颗粒燃烧温度降低。在20%LaCoO3/HZSM-5催化剂中用铁离子部分取代钴离子可以改善碳颗粒的燃烧性能,取代量增加碳颗粒燃烧温度降低,但是生成CO2的选择性也降低,以20%LaCo0.2Fe0.8O3/HZSM-5为催化剂,Tig、Tm和Tf分别为256℃、399℃和403℃,但生成CO2的选择性只有72.5%。在20%LaCo1-xFexO3/HZSM-5中的钙钛矿型复合氧化物B位离子中加入铜离子后,在碳颗粒燃烧反应中生成CO2的选择性得到明显改善,Sco2提高10个单位以上。以20%LaCo0.2Fe0.6Cu0.2O3/HZSM-5为催化剂,在碳颗粒燃烧反应中生成CO2的选择性可以达到94.7%,Tig、Tm和Tf分别为242℃、427℃和445℃。     

大型炼化一体化项目清洁生产评价实例研究

炼化一体化、装置大型化为炼油项目的发展趋势,符合清洁生产、循环经济原则。目前炼化一体化项目尚无相应的清洁生产标准。综合指标评价法将定性指标量化与定量指标统一起来,从而能从整体上做出一个明确的判断结果。以国内同行业先进企业各项指标为基准值,对某1000万t/a炼油、100万t/a乙烯一体化项目实例研究表明,采用综合指标评价法进行清洁生产评价,使得定性分析和定量评价结果得到了较好的吻合,评价结果更具科学性与实用性。综合指标评价法不仅可以用于大型炼化一体化项目环境影响评价时的清洁生产评价,也可用于现有工程的清洁生产审核以及企业实施清洁生产绩效评价。     

焦化行业苯并芘排放量与厂界达标预测分析

论文以某100万吨/年焦化项目为例,分析其在不同地形和风速参数条件下苯并芘排放量,预测不同条件下距离焦炉炉体中心-1000～1000米范围内各网格点的苯并芘超标概率,最终得出风速、地形参数对苯并芘浓度超标概率的影响.