生物法处理海上油田含聚生产污水研究报告

应用"倍加清"特种微生物技术,结合"气浮+生化+固液分离"的处理工艺,以中海油绥中SZ36-1陆上终端含聚污水为水质样本,研究生物法处理海上油田含聚生产污水的效果。结果表明,该工艺处理后出水可达"1.5.2"的水质标准,远优于"10.10.3"的注入水质指标要求,并确定了相关技术参数。该技术具备处理效果好、适应来水水质范围大、环境友好等优势。但由于空间重量的限制,尚不适用于海上油田平台的生产水处理工艺。     

脱水污泥中聚合物的碱提取及其镉吸附效能研究

市政污水处理厂产生的脱水剩余污泥中含有大量的细菌胞外聚合物、胞内聚合物等大分子有机物,是一种良好的生物吸附剂制备原料。以脱水污泥为原料,采用碱提取的方法,对污泥中胞外聚合物与胞内聚合物进行提取,提取得到聚合物吸附剂,分析了聚合物吸附剂中聚合物浓度、核酸浓度随提取剂中NaOH浓度的变化,考察了聚合物吸附剂对水中镉的等温吸附性能。研究结果表明,当NaOH浓度小于0.5 mol/L时,随着提取剂NaOH浓度的升高,得到的提取液中聚合物浓度、核酸浓度逐渐升高。最佳的提取剂中NaOH浓度为0.3 mol/L,该条件下能够充分实现污泥中聚合物的提取。当NaOH浓度高于0.5 mol/L,聚合物中核酸存在一定程度的分解。聚合物吸附剂对水中Cd2+的吸附符合Langmuir模型,NaOH浓度为0.3 mol/L条件下提取得到的聚合物吸附剂的镉饱和吸附容量最大,达1.022 mmol/g。     

电感耦合等离子体原子发射光谱法测定电路板中金属含量的方法改进

根据样品中被测元素的特点,采用硝酸-氢氟酸-高氯酸-硼酸-硝酸和硝酸体系,对电路板中金属元素进行消解,用电感耦合等离子体原子发射光谱法对电路板中的金属元素含量进行定量分析。该方法具有简单、准确的特点,可以快速分析电路板中的金属元素含量。     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines

This study investigated the filtration and continuous regeneration of a particulate filter system on an engine test bench, consisting of a diesel oxidation catalyst（DOC） and a catalyzed diesel particulate filter（CDPF）. Both the DOC and the CDPF led to a high conversion of NO to NO2 for continuous regeneration. The filtration efficiency on solid particle number（SPN） was close to100%. The post-CDPF particles were mainly in accumulation mode. The downstream SPN was sensitively influenced by the variation of the soot loading. This phenomenon provides a method for determining the balance point temperature by measuring the trend of SPN concentration.     

Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

利用微型后生动物进行污泥原位减量的试验研究

在A/A/O普通活性污泥工艺中引入非寡毛类微型后生动物考察其生长条件和对剩余污泥的减量效果及对系统处理效果的影响。结果表明,当进水负荷小于0.5 mg(/mg MLSS·d)时,非寡毛类微型后生动物可大量生长;当内回流比升高、外回流比降低时,更有利于虫体的繁殖。经过适时的运行工艺调整可使生化系统虫体密度和稳定性提高,污泥减量效果可达到40%以上。非寡毛类后生动物的活动与摄食作用提高了系统污泥的沉降性能,并对系统出水COD、NH3-N、TN、TP、SS没有影响。。     

采用精密度法评定总氮测量不确定度

采用top-down技术中的精密度法对环境水样中总氮的测量不确定度进行了评定。文章利用实验室内期间精密度实验结果、参加能力验证结果和实验室内标准样品的重复性测定结果,对实验室测量偏倚和精密度控制情况进行评估,并在保证实验室的测量过程处于统计受控状态下,参考能力验证的室间标准差作为测量不确定度的估计值。由于这种方法关注实验的整个过程,因此更能从整体上反映实验结果的测量不确定度;并且由于省去了传统bottom-up技术中复杂的实验设计和繁琐的合成计算,应用起来简便易行。     

黄石市典型农业土壤中重金属污染水平及评价

以黄石市阳新县某大型农场作为研究区,于2012年2月采集8个代表性表层(0~20 cm)土壤样品,采用火焰-原子吸收分光光度法分析了各重金属元素(Cu、Pb、Zn、Cd、Mn、Co)的总量及BCR连续提取法提取土壤中重金属的弱酸态、可还原态、可氧化态和残渣态含量。结果显示,Cu、Pb、Zn、Cd、Mn和Co总量的平均值分别为122.10、141.29、335.53、2.18、2 606.58和128.27 mg/kg,其中Cd超过了土壤环境三级标准限值,Mn具有最强的变异系数,受到外来污染因素的影响最大。通过地积累指数法和潜在生态危害法表明,6种重金属累积程度由高到低依次为CdCoCuPbZnMn,且Cd、Mn为主要生态风险因子。同时由形态分析可知,Cu、Pb、Cd、Zn、Mn和Co的化学形态分布均以残渣态为主,说明该农场土壤中重金属元素比较稳定,不易迁移转化,对生物的毒性较小。     

应用新型好氧堆肥反应器连续投加处理人粪便的研究

针对间歇式堆肥反应器处理效率低、不便移动、单次投加所需物料量大等不足,以及为更有效地处理分散型人粪便,使人粪便资源化,开发了梨形筒式好氧堆肥反应器。在获得该反应器的最佳通风与搅拌频率分别为3.0 L/min,5 min/h以及最佳m（粪便）︰m（锯末）为1︰2.5的条件下进行连续投加人粪便好氧堆肥。在不接种微生物的30 d堆制过程中,升-降温周期为36 h,平均温度为51.44℃,第15天时COD降解率达到63.99%并趋于稳定,TN损失率第17天时达到56.68%,GI于第21天时达到106.25%,堆肥完全腐熟,稳定期处理效率为23.81 g/（L·d）。接种土著菌种时,升-降温周期缩短至24 h,平均温度为53.96℃,COD降解率8 d可达65.28%,TN 损失率仅为25.75%,GI于第8天达到108.22%,稳定期处理效率可达35.71 g/（L·d）,比不接种时提高1.5倍,同时节约能耗50%。