浸渍液pH值对V-Mo/Ti脱硝催化剂性能的影响研究

为提升V-Mo/Ti催化剂的脱硝性能,在催化剂制备过程中调节浸渍工艺参数,制备了一系列不同浸渍液pH值的催化剂,采用XRD、N2-吸附脱附、拉曼光谱、UV-Vis、H2-TPR、NH3-TPD等手段对催化剂进行表征,考察了pH值的变化对催化剂物理化学性能的影响,采用固定床微型反应器对催化剂的脱硝性能进行评价。结果表明,降低浸渍液pH值,可以抑制催化剂上VOx物种的聚合,提升催化剂的还原性能,有利于提升催化剂的脱硝效率,降低脱硝反应过程中N2O生成量。同时,浸渍液pH值的变化,也会影响催化剂的酸性性能。当浸渍液pH值低于3.64时,催化剂酸性性能显著降低,造成催化剂脱硝性能降低;当浸渍液pH值控制在3.64时,催化剂的还原性能和酸性性能匹配较好,从而显示了较高的脱硝性能。     

改性Ti/SnO2-Sb电极催化降解1,4-二氯苯废水试验研究

采用聚合物前驱体法制备了未掺杂、掺杂Cu、掺杂Bi、掺杂Ni的4种Ti/Sn O2-Sb电极,运用SEM和XRD分析电极表面形貌及结构,通过线性极化扫描、循环伏安等测试考察其电化学性能,同时进行1,4二氯苯(p-DCB)降解实验进一步探究电极的电催化氧化特性.SEM和XRD结果表明,掺杂金属可改善电极表面形貌,增大其比表面积;电化学测试表明,Ti/Sn O2-Sb电极的析氧电位并未因金属掺杂而有明显改变,掺杂金属后,Ti/Sn O2-Sb电极具有更优的电催化活性和稳定性.p-DCB降解实验表明,改性Ti/Sn O2-Sb电极对p-DCB的降解效率明显提高,其中Ti/Sn O2-Sb-Cu电极的电催化处理效果最优,电解2 h后p-DCB的去除率即达到87.6%,且p-DCB的降解反应遵循一级反应动力学规律.     

Efficient dechlorination of 2,4-dichlorophenol in an aqueous media with a mild pH using a Pd/TiO2NTs/Ti cathode

In this study, palladium-loaded titania nanotubes was fabricated on a titanium plate (Pd/TiO₂NTs/Ti) for efficient electrodechlorination of 2,4-chlorophenol with a mild pH condition. The nature of Pd/TiO₂NTs/Ti electrodes was characterized by field-emission scanning electron microscope (FESEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) techniques. The characterization results indicated the generation of Pd⁰ nanoparticles which were evenly dispersed on titania nanotubes arrays on the Pd/TiO₂NTs/Ti surface. An effective degradation efficiency of up to 91% was achieved within 60 min at cathode potential of −0.7 V (vs. SCE) and initial pH of 5.5. The effects of the applied cathode potential and initial pH on the degradation efficiency were studied. A near neutral condition was more favorable since very low and very high pHs were not conducive to the dechlorination process. Furthermore, the intermediates analysis showed that the Pd/TiO₂NTs/Ti electrode could completely remove chlorine from 2, 4-dichlorophenol since only phenol was detected as the byproduct and the concentration of released chlorine ions indicated near-complete dechlorination. This work presents a good alternative technique for eliminating persistent chlorophenols in polluted wastewater without maintaining strong acidic environment.     

Neighborhood form and CO2 emission: evidence from 23 neighborhoods in Jinan, China

To understand the household C02 emission level in China, as well as how much the neighborhoods＇ socio-economic or design factors could influence the CO2 emission, 23 neighborhoods in Jinan were investigated in 2009 and 2010. These neighborhoods fall into four different types： superblock, enclave, grid and traditional. The household CO2 emission includes sources of both in- home energy use and passenger transportation. The average CO2 emission per household is 7.66 t.a^-1, including 6.87 t in-home operational emission and 792 kg transportation emission. The household CO2 emission by neighborhood categories is 10.97, 5.65, 6.49, 5.40 t-household-1. a-1 for superblock, enclave, grid and tradi- tional respectively. Superblock has the highest average emission and also the highest percent （more than 25%） of transportation emission among four different types of neighborhoods. The residential CO2 emission of superb- lock neighborhoods in Jinan has already reached the level in developed countries nearly ten years ago. It is predictable that more superblock neighborhoods would be built in China with the fast urbanization. How to avoid the rapid household CO2 emission growth in the future would be a systematic issue. The study also found that in addition to income and apartment area, household density, land use mix and accessibility to public transportation are three primary factors which have significant impacts on CO2 emission. High density, mixed land use and convenient accessibility to public transportation tend to reduce household CO2 emission.     

大气高CO2浓度对油菜氮素同化累积与植株生长的影响

为了指导高CO2浓度条件下甘蓝型油菜Brassica napus L.合理施氮、创建油菜高产高效以及进一步探明油菜氮代谢的调节机制提供理论依据,本研究采用微区试验,研究2个油菜品种（沪油15-33号和742-2）在2个CO2浓度水平（自然CO2摩尔分数400μmol·mol-1和高CO2摩尔分数（800±20）μmol·mol-1）和2个氮素水平（施氮与不施氮）条件下,氮素同化酶（NR和GS）活性和可溶性蛋白含量的变化,以及油菜地上部干物质量和氮素累积量的响应。试验结果表明,高CO2浓度会提高NR和GS活性;在氮素处理的影响方面,NR活性的变化与油菜的品种和生育时期不同有关：在高CO2浓度条件下,品种A在各时期的施氮处理的酶活性高于不施氮处理;品种B只在抽薹期的施氮处理低于不施氮处理,其他时期则升高;对于GS酶活性,在自然CO2浓度条件下施氮会提高GS酶活性,高CO2浓度条件下施氮则降低其活性（苗期除外）。CO2浓度升高会降低叶片中可溶性蛋白含量（盛花期除外）;在正常CO2浓度下,增施氮肥会提高叶片中可溶性蛋白含量,而在高CO2浓度下,增施氮肥会降低叶片中可溶性蛋白含量。CO2浓度升高和增施氮肥都会提高油菜地上部干物质量与氮素累积量,油菜干物质量与氮素累积量总体上与上述测定指标呈极显著相关。     

2003—2010年中国对流层CO2时空分布研究

利用2003年到2010年的美国宇航局（National Aeronautics and Space Administration,NASA）的AIRS（Atmosphere InfraRed Sounder）官方反演的对流层中层（500 hPa）左右一段气柱内的CO2体积混合比产品分析中国地区对流层的CO2体积分数分布时空变化特征。所用数据是对AIRS L3产品2°×2.5°网格数据进行处理分析得到。经过对这8年的观测数据（2003年1月—2010年12月）的数据分析研究发现：中国地区平均CO2的体积分数在空间分布上极不平衡,总体高值集中于北部。CO2对流层中层的高值区集中在35°—45°N,形成东北平原、内蒙古中西部地区、塔克拉玛干沙漠和塔里木盆地4个高值中心,而云南地区和西藏南部上空的CO2值偏低。与中国地区8年平均CO2体积分数变化特征大体一致,每月（8年平均值）分布趋势也呈北部地区和东部地区高而南方体积分数值相对低的特征。CO2月平均体积分数的最高值一般出现在每年的4月或者5月,而每年的最低值则出现在每年的1月。对流层中层CO2体积分数呈现明显季节变化,总体上来说,从2003年到2010年这8年中,平均春、夏两季对流层中CO2含量较高,而秋、冬季CO2低于春夏两季。     

新农药HW-02在土壤中的吸附

采用振荡平衡法研究了新型除草剂HW-02在5种不同土壤中的吸附特性. 结果表明:土壤对HW-02的吸附性强;HW-02在黑钙土、白浆土、草甸土、砂性土和黏壤土等5种土壤中的吸附可用Freundlich等温式较好地描述,其吸附系数(K_F)分别为332.65,103.32,672.97,577.96和289.60,吸附自由能变绝对值(ΔG)分别为16.55,22.73,18.32,18.48和22.86 kJ/mol,说明HW-02在土壤中的吸附以物理吸附为主;HW-02在5种土壤中的有机质吸附常数(K_OM)为796.57～10 197.18,说明其在土壤中迁移性很弱. HW-02在土壤中的吸附系数与土壤w(有机质),pH和w(黏粒)相关性较好,而与阳离子交换量(CEC)的相关性差,说明土壤w(有机质),w(黏粒)和pH是影响HW-02在土壤中吸附的主要因素.      

二氧化铅电极的制备、表征及其电催化性能研究

以电沉积法制备了Ti/PbO2和Ti/MnO2/PbO22种电极.采用SEM、XRD和XPS等分析方法表征了电极的形貌、元素组成及元素化学态,并以罗丹明B为目标有机物,考察了所制备电极的析氧极化曲线和电催化活性以及Ti/MnO2/PbO2电极的循环伏安曲线.研究结果表明,Ti/MnO2/PbO2电极的稳定性、使用寿命、析氧电位和电催化活性较Ti/PbO2电极都有所提高,并且罗丹明B在Ti/MnO2/PbO2电极上的反应主要发生在析氧反应区,且反应不可逆.     

Ti/BDD/PbO_2复合电极在化学需氧量测定中的应用

以钛基掺硼金刚石为基体,采用电沉积的方法制备了Ti/BDD/PbO2复合电极,并将其用于化学需氧量（COD）的测定。采用扫描电子显微镜（SEM）和X射线衍射谱图（XRD）表征了电极的微观形貌及结构,采用电化学工作站考察了电极对有机物响应特性。实验结果表明,在1.45 V的低电位条件下,线性范围为0.5～175 mg/L,检测限为0.3 mg/L（S/N=3）。采用Ti/BDD/PbO2复合电极测定法和重铬酸钾标准方法对市政污水、食品废水及印染废水的对比结果表明,2种方法的相对误差小于10%,具有良好的一致性。     

RuO_2-IrO_2/Ti阳极电催化降解偶氮染料甲基橙模拟废水

以自制Ti基Ru O2-Ir O2镀层形稳电极为阳极,采用电催化氧化处理偶氮染料甲基橙模拟废水。以硫酸钠为支持电解质,在自然p H条件下分别考察了电解时间、电极间距、电流密度和电解质浓度等因素对甲基橙去除率的影响,并分析其原因。实验结果表明,在自然p H、电极间距为1.0 cm、电流密度为30.0 m A/cm2、电解质硫酸钠浓度为20.0 g/L、电解1.0h,甲基橙去除率高达90.0%以上。因此,电催化氧化法作为一种高效、简便的染料废水处理技术,具有一定的应用潜力。