Impact of untreated wastewater irrigation on soils and crops in Shiraz suburban area, SW Iran

In this study an assessment is made of the negative impacts of wastewater irrigation on soils and crops sampled along the Khoshk River channel in suburban area of Shiraz City, SW Iran. For this purpose, samples of soil profiles (0–60 cm in depth) and crops were collected from two wastewater irrigated sites and a tube well-irrigated (control) site. Total concentrations of the five heavy metals (Ni, Pb, Cd, Zn and Cr) and their phytoavailable contents were determined. The Pollution Load Indexes (PLIs) and Contamination Factors (CFs) for soils and Hazard quotients (ΣHQ) for some vegetables were also calculated. The results showed the use of untreated wastewater has caused the following changes as compared to control site: (1) a 20–30% increase in organic matter content of soil; (2) increase in pH by 2–3 units; (3) significant concentration increase in Ex-Ca especially in top layers of soil resulting in high CEC; (4) build up of heavy metals (notably Pb and Ni) in topsoil above Maximum Permissible Limits (MPLs) indicating a moderate contamination (PLI > 1, CF > 2.5); (5) contamination of some vegetables (spinach and lettuce) with Cd due to its high phytoavailability in topsoil causing a HQ > 1; (6) excessive accumulation of Ni and Pb in wheat due to continual addition of heavy metals through long-term wastewater application. The study concludes that strict protection measures, stringent guidelines and an integrated system for the treatment and recycling of wastewater are needed to minimize the negative impacts of wastewater irrigation in the study area.     

Magnetic mapping of fly-ash pollution and heavy metals from soil samples around a point source in a dry tropical environment

The Singrauli region in the southeastern part of Uttar Pradesh, India is one of the most polluted industrial sites of Asia. It encompasses 11 open cast coalmines and six thermal power stations that generate about 7,500 MW (about 10% of India’s installed generation capacity) electricity. Thermal power plants represent the main source of pollution in this region, emitting six million tonnes of fly-ash per annum. Fly-ash is deposited on soils over a large area surrounding thermal power plants. Fly-ashes have high surface concentrations of several toxic elements (heavy metals) and high atmospheric mobility. Fly ash is produced through high-temperature combustion of fossil fuel rich in ferromagnetic minerals. These contaminants can be identified using rock-magnetic methods. Magnetic susceptibility is directly linked to the concentration of ferromagnetic minerals, primarily high values of magnetite. In this study, magnetic susceptibility of top soil samples collected from surrounding areas of a bituminous-coal-fired power plant were measured to identify areas of high emission levels and to chart the spatial distribution of airborne solid particles. Sites close to the power plant have shown higher values of susceptibility that decreases with increasing distance from the source. A significant correlation between magnetic susceptibility and heavy metal content in soils is found. A comparison of the spatial distribution of magnetic susceptibility with heavy-metal concentrations in soil samples suggests that magnetic measurements can be used as a rapid and inexpensive method for proxy mapping of air borne pollution due to industrial activity.     

Air quality and deposition of trace elements in Didouche Mourad, Algeria

Total suspended particulate matter and deposition fluxes of particles were investigated in the town of Didouche Mourad which is located 13 km north of Constantine. Samples of air particulate matter were collected at one site located in the heart of the town and situated 3 km north of a cement plant. Samples were collected from 2 November 2002 to 28 April 2003 every 3 days using a high volume air sampler. Sampling intervals were 24 h in all cases. During the same period, samples of dust fallout were collected at the same site. Samples were collected at 30-day intervals. Lead, chromium, manganese, nickel, copper, cobalt and cadmium deposition fluxes were measured and both the soluble and insoluble fractions were determined. Furthermore, the information gathered by this study was correlated with the corresponding hourly weather data provided by a weather station installed at the study station. The possible sources for dust and trace metals were analyzed by comparing average contributions of wind aspects to the concentrations and depositions of mass and chemical species with the average frequencies of wind direction. The mean concentration was 300 μg/m³. The average dust deposition rate through the period of study was 221 mg/(m².day). Results indicate that anthropogenic sources contribute greatly to trace elements. An exposure assessment to the heavy metals taking into account the inhalation route and soil dust ingestion was carried out and allowed direct comparison of trace metal intakes via these routes.     

Heavy metal contamination from mining sites in South Morocco: Monitoring metal content and toxicity of soil runoff and groundwater

The aim of the present work is the assessment of metal toxicity in runoff, in their contaminated soils and in the groundwater sampled from two mining areas in the region of Marrakech using a microbial bioassay MetPLATE™. This bioassay is based on the specific inhibition of the β-galactosidase enzyme of a mutant strain of Escherichia coli, by the metallic pollutants. The stream waters from all sampling stations in the two mines were all very toxic and displayed percent enzyme inhibition exceeding 87% except SWA₄ and SWB₁ stations in mine C. Their high concentrations of copper (Cu) and zinc (Zn) confirm the acute toxicity shown by MetPLATE. The pH of stream waters from mine B and C varied between 2.1 and 6.2 and was probably responsible for metal mobilization, suggesting a problem of acid mine drainage in these mining areas. The bioassay MetPLATE™ was also applied to mine tailings and to soils contaminated by the acidic waters. The results show that the high toxicity of these soils and tailings was mainly due to the relatively concentration of soluble Zn and Cu. The use of MetPLATE™ in groundwater toxicity testing shows that, most of the samples exhibited low metal toxicity (2.7–45.5% inhibition) except GW3 of the mine B (95.3% inhibition during the wet season and 82.9% inhibition during the dry season). This high toxicity is attributed to the higher than usual concentrations of Cu (189 μg Cu l⁻¹) and Zn (1505 μg Zn l⁻¹). These results show the potential risk of the contamination of different ecosystems situated to the vicinity of these two metalliferous sites. The general trend observed was an increase in metal toxicity measured by the MetPLATE with increasing total and mobile metal concentrations in the studied matrices. Therefore, the MetPLATE bioassay is a reliable and fast bioassay to estimate the metals toxicity in the aquatic and solids samples.     

Heavy metals in water, sediment and tissues of Liza saliens from Esmoriz–Paramos lagoon, Portugal

Esmoriz–Paramos lagoon is an ecosystem of great ecological importance that is located on the northwest coast of Portugal and has been degraded as a result of industrial and anthropogenic activities. Concentrations of heavy metals (Cr, Cu, Pb and Zn) were measured in water, sediment and in tissues (liver and muscle) of Liza saliens, which is the dominant fish from the lagoon. Comparisons between metal concentrations in water and sediments were made with those in tissues of fish caught at the lagoon. Metals in water were quantified predominantly bound to particulate and equalled or exceeded the limit of chronic reference values. Metal concentrations in sediments varied among sampled sites. The relative order of concentrations was “Zn > Cu ∼ Pb > Cr” the same pattern observed for metals in water. Metals in fish tissues showed higher concentrations in liver (262 mg Cu·Kg⁻¹ and 89 mg Zn·Kg⁻¹) than in muscle (<3 mg Cu·Kg⁻¹ and 26 mg Zn·Kg⁻¹), while Pb and Cr were not detected. These results suggest that Cu and Zn are the metals of major concern in the lagoon. Mullet detritivorous feeding habits, bioaccumulation pattern and the high sediment metals concentrations relative to the water suggest that sediments can be the most important source of contamination in this ecosystem. The positive relationship found between Cu in liver and fish length demonstrates that time of exposure is a crucial factor in bioaccumulation. Condition indices (K and HSI) in mullets from the lagoon were higher compared to mullets from sea, suggesting abnormal condition in the lagoon population. We conclude that metals chronic exposure in the lagoon can impose considerable fish stress. The results also show that the lagoon is an area of environmental concern.     

Concentration of heavy metals in Karanja reservoir, Bidar district, Karnataka, India

In this study, some heavy metals concentrations (Zn, Pb, Fe, Mn, Cu, Ni) and other physico-chemical parameters were studied during October 2001 to September 2003 in Karanja reservoir, Bidar district. Water quality parameters were collected monthly basis whereas heavy metals were analyzed by Atomic Adsorption Spectrometer (AAS). Heavy metals have shown within the permissible limits, except Fe and Ni were recorded higher values in southwest monsoon, where as Mn has showed higher concentration in northeast monsoon in and summer. All other physico-chemical parameters are with in the permissible limit. Water is moderately hard and reservoir is productive.     

Accumulation of Heavy Metals in Epiphytic Lichens Near a Municipal Solid Waste Incinerator (Central Italy)

The epiphytic lichen Parmelia caperata was usedas biomonitor in the area of a municipal solid wasteincinerator (Poggibonsi, central Italy) to investigatethe levels and the spatial distribution of the heavymetals Al, Cd, Cr, Cu, Fe, Hg, Pb and Zn. Levels ofAl, Cu and Hg were similar to those in unpollutedareas, whereas high values were found for Cr, Zn andespecially Cd. The distribution pattern of the lastthree metals and the exponential relationship of theirconcentrations with distance from the incinerator,showed that the disposal plant is a local source ofatmospheric pollution due to Cd, Cr and Zn. For thesemetals, long-term hazard should be seriously taken into account.     

Nutritionally relevant elements in staple foods: influence of arable site versus choice of variety

Eighteen representative sites for the Austrian grain-growing and eight for the potato-growing zones (soils and crops) were investigated. On each site, total element contents (B, Ba, Ca, Cd, Co, Cu, Fe, K, Li, Mg, Mn, Mo, Na, P, Sr and Zn) were determined in 4–12 varieties of winter wheat (n = 136), 6 varieties of spring durum wheat (n = 30), 5 varieties of winter durum wheat (n = 15), 7 varieties of rye (n = 49), 5 varieties of spring barley (n = 30) and 5 varieties of potatoes (n = 40). Element accumulations in grain species and potato tubers varied significantly with site conditions, with the main exceptions for B in potatoes and wheat as well as for Zn, Cu and Co in durum wheat. On average, across all investigated sites, differences in varieties occurred concerning the elements Ca, Cd, Ba, Sr and Zn (except Zn in potatoes and winter durum). A rough estimation revealed that an average Austrian consumer of wheat, rye and potatoes meets more than 50% of the needs of daily element intake for K, P and Mg, between 36 and 72% for Fe, Zn and Cu, and more than 100% for Co, Mo and Mn. In particular, the elements Ca and Na have to be added from other sources.     

Uptake of metals by food plants grown on soils 10 years after biosolids application

Potentially hazardous trace elements such as Cd, Cu, Cr, Ni and Zn are expected to accumulate in biosolids–amended soil and remain in the soil for a long period of time. In this research, uptake of metals by food plants including cabbage, carrot, lettuce and tomato grown on soils 10 years after biosolids application was studied. All the five metals were significantly accumulated in the biosolids-amended soils. The accumulation of metal in soil did not result in significant increase in concentrations of Cu, Cr and Ni in the edible plant tissues. However, the Cd and Zn concentrations of the edible tissues of plants harvested from the biosolids receiving soils were significantly enhanced in comparison with those of the unaffected soils. The plant uptake under Greenfield sandy loam soil was generally higher than those under the Domino clayey loam soil. The metal concentration of edible plant tissue exhibited increasing trends with respect to the concentrations of the ambulated metals. The extents of the increases were plant species dependent. The indigenous soil metals were absorbed by the plants in much higher rates than those of the biosolids–receiving soils. It appeared that the plant uptake of the indigenous soil-borne metal and the added biosolids-borne metals are independent of one another and mathematically are additive.     

Experimental evaluation of emission factors of cement kilns burning hazardous wastes

Cement industry is an interesting way to eliminate combustible wastes. Thermal valorization is maximal, conditions of combustion are especially favorable to the destruction and the trapping of pollutants, and there are neither ultimate residues (slag) nor aqueous rejects. Moreover the properties of the cement are not modified. Nevertheless the increased use of substitution fuel may lead to deal with unusual amounts of heavy metals. Tests were realized on several rotary cement kilns with varying substitution ratios of fossil fuels by wastes. Mass balances were fitted over the whole plant, and emission factors were explained.