城市滨水景观评价研究初探——以南京市莫愁湖滨水区为例

城市滨水区一直被认为是一个城市最具活力和生态价值的区域,但伴随着城市职能的转型以及水运地位的下降,世界上大部分的滨水区都经历了从繁荣到衰败的过程。然而目前,随着城市人群的生态需求与审美需求的进一步提高,城市滨水区又面临着复兴之势,这也对城市滨水号观设计以及作为其基础而存在的滨水景观评价提出了新的要求。因此。本文将以成分代用模式评价方法为指导,以南京市莫愁湖滨水区为案例对其进行景观评价,并基于此获取影响滨水区景观质量的重要因素,以期对以后的滨水区规划设计起到一定的指导作用。     

我区城市污水处理程度探讨

建立城市污水处理厂处理污水,是城市发展的必然趋势,而处理级别及处理后水的去向及用途是关系到环境保护和资源得到充分利用的关键,针对我区干旱缺水,灌溉农业特征及天然水域的特点,就污水处理级别排水的用途提出一些看法。     

城市生活垃圾生命周期管理

生命周期评价是一种全面的环境管理工具,具有潜在的发展前景。０它通过对产品,产品系统,工艺活动整个生命周期的环境影响环境改善的机会进行评价。根据国际环境毒理与化学学会１９９３年和ＩＳＯ１４０００环境管理体系中关于生命周期评价的技术框架,本文应生命周期评价在城市生产垃圾管理系统中的作用及管理系统的清单分析,影响评价和改善评价进行研究。     

江汉平原农村食品中农药残留研究

研究了湖北省潜江市农村６类食品中农药的残留情况,采样测定结果表明,在被检食品中有机氯农药污染普遍存在,但残留量均低于最大残留限量（ＭＲＬ）,以植物油残留量为最大;有机磷农药残留只在蔬菜中检出,检出率以根菜类为最大,叶菜类次之,果菜类和花菜类最小;菊酯类农药残留较少;杀菌剂多菌灵残留未检出。     

温州市粮食生产潜力及土地人口承载力研究

在光能生产潜力计算的基础上,经过温度、降水、土壤肥力和土壤质量等自然因素的订正,分析了温州市的土地生产潜力、粮食生产潜力。通过对温州市历年来主要粮食作物产量分析,采用产潜比增长速度法预测了２０００年和２０１０年的粮食产量,并据此计算了２０００年、２０１０年和潜在最大的人口承载量,指出温州市建立稳定协调可持续发展的人地关系的关键。     

湖南林业科技成果市场化的思考

林业科技成果转化为现实生产力,须通过一系列的中介才能发挥作用,尤其是在社会主义市场经济条件下,其中介更主要地表现为市场.如何使湖南林业科技成果市场化,作者认为:加强湖南林业科技推广是实现湖南林业科技成果市场化的重要环节.     

无性系林业的研究进展

介绍了无性系林业的基本理论及其发展状况,分析了无性系林业的优缺点,提出了无性系林业的发展方向。     

A method for evaluating transport energy consumption in suburban areas

Urban sprawl is a major issue for sustainable development. It represents a significant contribution to energy consumption of a territory especially due to transportation requirements. However, transport energy consumption is rarely taken into account when the sustainability of suburban structures is studied. In this context, the paper presents a method to estimate transport energy consumption in residential suburban areas. The study aimed, on this basis, at highlighting the most efficient strategies needed to promote awareness and to give practical hints on how to reduce transport energy consumption linked to urban sprawl in existing and future suburban neighborhoods. The method uses data collected by using empirical surveys and GIS. An application of this method is presented concerning the comparison of four suburban districts located in Belgium to demonstrate the advantages of the approach. The influence of several parameters, such as distance to work places and services, use of public transport and performance of the vehicles, are then discussed to allow a range of different development situations to be explored. The results of the case studies highlight that traveled distances, and thus a good mix between activities at the living area scale, are of primordial importance for the energy performance, whereas means of transport used is only of little impact. Improving the performance of the vehicles and favoring home-work give also significant energy savings. The method can be used when planning new areas or retrofitting existing ones, as well as promoting more sustainable lifestyles regarding transport habits.     

Carbon Monoxide Concentration in a Street Canyon of Buenos Aires City (Argentina)

The analysis of three years of 8-h CO concentration values registered in a deep street canyon downtown shows high frequency of values that exceed WHO health protection guidelines. An inverse relationship between opposing percentiles of the distributions of CO concentrations and mean wind speed could be found. Data also showed a variation of mean CO values with prevailing wind direction. The averaged concentration value obtained when the sampler probe is on the leeward side is lower than the obtained when it is on the windward wall. A preliminary explanation of this feature may be related to the advection of polluted air from a high traffic density area nearby.     

Numerical Simulations of the Urban Roughness Sub-Layer : A First Attempt

Most of the mesoscale models use roughness parameters to characterise the ground and to compute the surface stress. As the experimental determinations of the urban roughness parameters are rare and not very reliable, a new methodology based on microscale numerical simulations is presented here and the first results from two-dimensional simulations with different roof shapes are analysed.Firstly, it appears that the roof shape has a large influence : large difference in the Reynolds stress profile and in the roughness sub-layer thickness, enhancement of the exchanges at the roof level by buildings with attic. It also appears that the fetch necessary to obtain a constant flux layer is unrealistic compared to the real spatial homogeneity of quarters in European cities. Consequently, a new parameterisation of the urban ground-induced friction is to be developed without reference to the constant flux layer theory.