负压二次曝气二氧化氯发生器的研制与应用

以氯酸钠和工业盐酸为基本原料,采用独特的负压二次曝气工艺,在催化剂作用下,经氧化还原反应产生以二氧化氯为主的混合消毒气体,经吸收后形成一定浓度的二氧化氯混合消毒液,与待处理水充分混合,达到杀菌消毒的目的。     

柴油发电机噪声治理改造工程一例

介绍一例窄小空间的大功率柴油发电机噪声改造工程。通过对原机房的改造 ,增加隔声、吸声、通风等措施 ,使发电机噪声排放达标     

CO气体激光检测仪中基于FPGA的信号源设计

在激光检测仪的系统设计中,要求信号源四路波形同步异频发生,且有移相、倍频、波形叠加等要求。利用FPGA技术完成满足以上要求的直接数字频率合成器(DDS)的设计。在实现中选用Altera公司的FPGA芯片EP2C8Q208C8为主芯片进行设计,充分利用了该芯片的超大集成性和快速性。在改进的DDS算法结构的基础上,系统的复杂度降低,更趋于模块化,产生的波形频率更准确。     

Feasibility analysis of renewable hybrid energy supply options for Masirah Island

In this paper, the assessment and modelling of alternative renewable energy systems for Masirah Island is considered. The hybrid system that is simulated comprises various combinations of wind turbines and/or photovoltaic (PV) supplemented with diesel generators and short-term battery storage. It was found from the analysis that the PV–wind–diesel hybrid system, with battery unit, has the lowest cost values as compared to solar-only or wind–diesel hybrid systems. Furthermore, the study illustrates that for a given hybrid system the presence of battery storage will reduce diesel consumption. The decrease in carbon emission, the percentage of fuel savings, the cost of energy production and the effect of wind and PV penetration are also addressed in this paper. The PV–wind–diesel hybrid option is techno-economically viable for the electrification of the Masirah Island.     

Intelligent power supply management of an autonomous hybrid energy generator

ABSTRACT

This work deals with the optimization of an hybrid energy system used to supply an isolated site. The proposed system combines a wind turbine, a photovoltaic panel, a diesel generator and a battery bank to electrify atypical home. An energy cost-effectiveness approach is adopted in accordance with meteorological data, time profile of energy consumption, and the cost of different alternative systems. A variety of performances is obtained through simulations within the Homer Pro environment. The selection of an optimal combination is based on the maximum integration of renewable energy in the suggested system with a minimum of gas emission. According to the obtained results, the overall cost of the selected installation is about 72,900 €, with 0.415€ the unit cost of a kWh electric energy provided with a contribution of renewable energy of around 86%. Simulations show a technical and financial benefits of the different configurations obtained to supply the target site. To control the proposed hybrid energy system, a supervision algorithm is developed and implemented on TMS320F28027 DSP platform. The proposed energy system aims to take advantages of renewable energy sources and shift to conventional sources only when necessary in order to ensure source autonomy and service continuity.     

Production of radioactive particles for use in environmental studies

This paper presents an aerosol generation technique developed to produce dry aerosol particles of various sizes from aqueous solutions of salt. The technique was tested with sodium chloride, lithium carbonate and uranyl acetate at various aqueous concentrations which produced particles in the size range of 0.13-1.37 microm Mass Median Diameter (MMD). The generated aerosols were acceptably monodisperse with a geometric standard deviation of 1.4-2. Both MMD and Mass Median Aerodynamic Diameter (MMAD) increased significantly (p<0.001) with increased concentration of the salt in solution. The technique can also be used to generate aerosols of different chemical species. The results obtained indicate that the system is convenient for use with various aerosol-forming materials, with a stable particle size distribution being maintained for a long period of steady operation. The technique was successfully applied in wind tunnel studies to simulate the release of submicron radioactive particles and their interception by crops, grass and tree canopies. The relevance and application of the technique in other areas of environmental assessment studies is discussed.     

A SIMPLE HYDRAULIC SIMULATOR1

ABSTRACT: A simple simulator was constructed, calibrated, programmed and used in management studies of a hydraulic system containing two pumping stations in series, connected by canals and reservoirs. The features of the model, its calibration and use are described, and comparisons between measured and computed hydraulic behavior are presented.     

Deflagration to detonation transition in a vapour cloud explosion in open but congested space: Large scale test

The paper reviews large scale experiments with various fuels in air where successful deflagration to detonation transition (DDT) took place. This includes a recent experiment disclosed in the Buncefield R&D program, where DDT developed in the propane/air mixture. The DDT occurred in branches of deciduous trees in a premixed stagnant mixture. An internal R&D investigation programme was initiated to better understand the phenomena. A large scale experiment in an open space with ethane air mixture is presented in the paper. The premixed mixture was ignited at the edge of the congested three-dimensional rigs which consisted of vertical and horizontal pipes. After ignition, the flame accelerated in the congestion and transitioned to detonation at the end of congestion. Stable detonation propagated through the remaining open and uncongested space.The flame acceleration process leading to DDT is scale dependent. It also depends on many parameters leading to a large investigation array and, significant cost. However, such R&D efforts aimed toward a safer plant design, i.e. the prevention of occurrence of a major accident, are a small fraction of a real accident cost.     

一种新型节能臭氧发生器

文章介绍了一种能耗低、效率高、快速生产臭氧的新装置。文中对该装置的工作原理、臭氧的生产过程、影响臭氧产率的因素以及该装置的特点等进行了简要介绍。     

Higher-efficiency for combined photovoltaic-thermoelectric solar power generation

Solar energy application in a large spectrum has the potential for high-efficiency energy conversion. Though, solar cells can only absorb photon energy of the solar spectrum near their band-gap energy, and the remaining energy will be converted into thermal energy. The use of the thermoelectric generator becomes a necessity for convert this thermal energy dissipated so as to increase efficiency conversion.

This paper analyses the feasibility of photovoltaic-thermoelectric hybrid system and reviews their performance in order to optimize harvested energy. Regarding the thermoelectric effect, a new method of the ambient energy harvesting is presented. This method combines thermoelectric generators and the effects of heat sensitive materials associated to photovoltaic cells in phase change for generating both energy day and night. Experimental measures have been conducted primarily in laboratory conditions for a greater understanding of hybridization phenomena under real conditions and to test the actual performance of devices made. Results show that the hybrid system can generate more power than the simple PV and TEG in environmental conditions. This hybrid technology will highlight the use of renewable energies in the service of the energy production.