滇缅大震与长江巨洪的遥相关

长江、珠江巨大洪水的预测对国计民生关系甚大。本文提出了滇缅地区７级以上大震发生后一年内长江和珠江有可能发生巨洪的预测指标。这一点和后来某些气象学家得到的青藏高原南部（９５°Ｅ以西）超前异常增温与江淮巨洪有关的结果是一致的,可以说这是相互验证。但这些气象学家未讨论增温的原因,我们的研究则包含这个问题的回答。另外在预测北方旱涝时也要考虑滇缅地区的大震发生与否。     

蒸汽喷射离子发生器及其应用

介绍一种新型蒸汽喷射离子发生器，并将这种发生器作为预荷电器，在旋风除尘器上进行除尘增效改造应用的试验。结果表明粉尘的预荷电及静电凝并可以增加除尘效率。     

An experimental set up of a PAH vapour generator and its use to test an annular denuder

The aim of this work is to develop and test a dynamic gas generator for semi-volatile organic compounds (SVOC). A single compound, naphthalene, is used as a surrogate PAH to test the system. The dynamic generation of PAH is based on the permeation technique [Analyst 106 (1981) 817; Am. Ind. Hyg. Assoc. J. 38 (1977) 712]. Monitoring the temperature and measuring the mass of PAH present in the permeation chamber every 48 h gives a direct measurement of the sublimation rate of the PAH. Knowing the flow rate, gives an accurate value of the concentration of PAH from the generator. It was found stable over a period of time under constant operating conditions. This concentration is diluted down to between 0.3 and 30 ppbv by a controlled flow of pure air. The diluting airflow is a mixture of dry and wet air, making it possible to control the relative humidity of the flow from the generator as well as its concentration in PAH. We used this generator to calibrate an annular denuder tube, based on the study by Gundel et al. [Atmos. Environ. 29 (1995) 1719]. Although this technique has been shown to be artefact-free for sampling gaseous PAH [Polycyclic Aromatic Compounds 9 (1996) 67; Atmos. Environ. 28 (1994) 3083], its trapping efficiency still depends on environmental parameters (temperature, relative humidity and sampling duration). Accordingly, we used our generator to calibrate a single annular denuder under controlled conditions (T degrees C, HR%, CPAH, sampling duration). The trapping efficiency of the denuder was calculated by two independent methods. Firstly, by comparing the amount trapped on a denuder with the measured mass sublimated in the generator. Secondly, by putting two denuders in series and comparing the mass collected on the first and the second tube. These two methods gave similar results, within the 10% relative uncertainties of both methods. The first results obtained show that, in environmental conditions, the efficiency ranges between 90 and 100%.     

膨润土中气溶胶泄漏行为研究

气溶胶泄漏问题是各种放射性实验过程和放射性物质储存、运输过程中普遍存在的问题 ,膨润土和砂则是常用的高放处置回填材料。工作中建立了层剖取样、微波浸提、ICP AES分析的气溶胶泄漏研究方法 ,来评估膨润土和砂对气溶胶的封堵性能。结果表明 :膨润土层的透过率远小于砂层。此外 ,对膨润土和砂 ,透过率与其气体渗透系数有一定的正相关性。     

氢化物原子吸收分光光度法测定水中的汞

在原402－A原子吸收分光光度计配以流动注射氢化物发生器，对水中汞进行测定，其灵敏度、精密度、准确度均有提高。     

Improving the dynamic response of frequency and power in a wind integrated power system by optimal design of compensated superconducting magnetic energy storage

The frequency deviation and power fluctuation need to be controlled in a wind-integrated power system (WIPS) for keeping the balance between system power generation and demand, which support the quality and stability of overall power system. The present paper addresses this problem while concerning the integration of intermittent wind power and load disturbance into the WIPS. With this intent, it proposes the compensated superconducting magnetic energy storage (CSMES) system with proportional integral derivative (PID) controller for improving the frequency and power deviation profile. A novel swarm intelligence-based artificial bee colony (ABC) algorithm is used for optimal design of PID-CSMES system. Robustness of the proposed ABC-based PID-CSMES control strategy is tested in WIPS under various disturbance patterns of load and wind power. To demonstrate the improved dynamic response, their simulation results are compared with particle swarm optimization-based PID-CSMES, PID with SMES, and only PID controller technique. The performance indices and transient response characteristics of frequency and power deviation are used to evaluate and compare the accuracy and efficiency of each controller. Stability of various system configurations is analyzed using eigenvalue location. Comparing the results of different controller in WIPS indicates a substantial improvement in the dynamic response of system frequency and power deviations by utilizing the proposed control strategy.     

浅谈石油储运工作中的环保问题及对策

介绍在轻质油灌装、内浮顶储罐运行和油罐区地面雨水排放等油品储运作业中存在的烃类对环境的污染问题。提出采用油气回收、泵体密闭排放等措施解决上述问题的设想。     

高效稳定的单一汞同位素大气发生系统

汞在大气-植被-土壤界面间的迁移转化一直是近年来研究的热点,稳定汞同位素添加技术为这一科学问题的研究提供了新的手段,而如何产生低浓度、稳定、连续且经济可行的单一汞同位素大气(xxx Hg0)是试验研究的难点与关键。本试验旨在设计、创建微环境单一汞同位素富集大气的发生系统,该系统不仅具有低成本,可以连续产生低浓度、稳定性强、可控性高、利用效率高的同位素汞蒸气(xxx Hg0)特性,还兼有轻便灵巧、安装便捷、可移动性强和适用范围广等特点。     

A method for simulation of vapour cloud explosions based on computational fluid dynamics (CFD)

The effectiveness of the application of CFD to vapour cloud explosion (VCE) modelling depends on the accuracy with which geometrical details of the obstacles likely to be encountered by the vapour cloud are represented and the correctness with which turbulence is predicted. This is because the severity of a VCE strongly depends on the types of obstacles encountered by the cloud undergoing combustion; the turbulence generated by the obstacles influences flame speed and feeds the process of explosion through enhanced mixing of fuel and oxidant. In this paper a CFD-based method is proposed on the basis of the author’s finding that among the various models available for assessing turbulence, the realizable k-? model yields results closer to experimental findings than the other, more frequently used, turbulence models if used in conjunction with the eddy-dissipation model. The applicability of the method has been demonstrated in simulating the dispersion and ignition of a typical vapour cloud formed as a result of a spill from a liquid petroleum gas (LPG) tank situated in a refinery. The simulation made it possible to assess the overpressures resulting from the combustion of the flammable vapour cloud. The phenomenon of flame acceleration, which is a characteristic of combustion enhanced in the presence of obstacles, was clearly observed. Comparison of the results with an oft-used commercial software reveals that the present CFD-based method achieves a more realistic simulation of the VCE phenomena.     

Development of a field well head safety system for use with radiation generating devices

This paper discusses the design, testing and application of a new interlock system for field use with neutron generating bore hole probes at the Idaho National Engineering and Environmental Laboratory. Such probes produce 14 MeV neutrons at a yield up to 3×10⁸ neutrons/s, and present an ionizing radiation hazard to personnel particularly when operated in an unshielded configuration. This interlock system prevents personnel from being exposed to the relatively high radiation fields caused by an unsafe condition when an operating neutron generator probe is withdrawn from a well in the ground. An electromechanical interlock prototype system has been designed, built and tested, and has been found to be effective at preventing this event. The design is simple, is effective in mitigating the hazard, and can be installed in minutes. The system could be modified to interlock radiation-generating devices other than neutron generators that are used in similar environments.